I don't plan to enable openmp by default, just provide some infrastructure for the user to explicitly enable it.

As for your case, for 10x10 matrices it doesn't even worth to use gemm.  Would bounded matrices work for you?  If the bounds are below the breakeven point for gemm (set to 27 for double currently), I could arrange for a compile-time switch.


On Tuesday, 8 March 2016, 19:13, Riccardo Rossi <rrossi@cimne.upc.edu> wrote:


Well the problem is that fixed matrices and vectors can not be used if you don t know the size at compile time
In my application (finite elements) I have Millons of matrices of size around 10by 10 on which I operate within outer openmp loops.
Having openmp in the matrix would be a killer for me
Riccardo
On 7 Mar 2016 18:13, "Nasos Iliopoulos" <nasos_i@hotmail.com> wrote:
That is correct,
there are various options here but none is optimal. Do you have any suggestions?

Note: we now have fixed_vector and fixed_matrix classes than can be used to make compile time decisions with respect to size.


-Nasos

On 03/07/2016 11:56 AM, Riccardo Rossi wrote:
Hi,

just to give my two cents, some care shall be taken so that there is no overhead for very small matrices (say 3*3)

cheers
Riccardo

On Sun, Mar 6, 2016 at 9:58 PM, palik imre <imre_palik@yahoo.co.uk> wrote:
It just ocured to me, that based on the descriptor struct it would be possible to choose between parallel and serial implementation of the kernels.

Anybody would be interested in having something like that in ublas?

Would an OpenMP parallel implementation be accepted to the library?

Thanks,

Imre


On Sunday, 6 March 2016, 10:43, palik imre <imre_palik@yahoo.co.uk> wrote:



_______________________________________________
ublas mailing list
ublas@lists.boost.org
http://lists.boost.org/mailman/listinfo.cgi/ublas
Sent to: rrossi@cimne.upc.edu



--
Riccardo Rossi
PhD, Civil Engineer

member of the Kratos Team: www.cimne.com/kratos
lecturer at Universitat Politècnica de Catalunya, BarcelonaTech (UPC)
Research fellow at International Center for Numerical Methods in Engineering (CIMNE)

C/ Gran Capità, s/n, Campus Nord UPC, Ed. C1, Despatx C9
08034 – Barcelona – Spain – www.cimne.com  - 
T.(+34) 93 401 56 96 skype: rougered4
 
Les dades personals contingudes en aquest missatge són tractades amb la finalitat de mantenir el contacte professional entre CIMNE i voste. Podra exercir els drets d'accés, rectificació, cancel·lació i oposició, dirigint-se a cimne@cimne.upc.edu. La utilització de la seva adreça de correu electronic per part de CIMNE queda subjecte a les disposicions de la Llei 34/2002, de Serveis de la Societat de la Informació i el Comerç Electronic.
 Imprimiu aquest missatge, només si és estrictament necessari.


_______________________________________________
ublas mailing list
ublas@lists.boost.org
http://lists.boost.org/mailman/listinfo.cgi/ublas
Sent to: athanasios.iliopoulos.ctr.gr@nrl.navy.mil


_______________________________________________
ublas mailing list
ublas@lists.boost.org
http://lists.boost.org/mailman/listinfo.cgi/ublas
Sent to: rrossi@cimne.upc.edu

_______________________________________________
ublas mailing list
ublas@lists.boost.org
http://lists.boost.org/mailman/listinfo.cgi/ublas
Sent to: imre_palik@yahoo.co.uk