August 2015 - Boost-announce

[boost] [http] Boost.Http review report
by Bjorn Reese 27 Aug '15

27 Aug '15

The outcome of the formal review of Boost.Http is that the library is NOT accepted for inclusion into Boost this time. Below I will first summarize the main themes running through the review, and afterwards I will make some recommendations about how to proceed from here. The following reviews were posted: - Antony Polukhin: No - Darren Cook: No - David Sankel: No - Lee Clagett: No - Niall Douglas: Yes, conditionally - Roland Bock: No - Tom Kent: No The discussions were constructive and offered much valuable feedback. There was a general consensus that Boost ought have a HTTP library, but that Boost.Http was too incomplete in its present state. Many reviewers mentioned the disconnect between their expectations and what the library offered. There were several suggestions for alternative names for the library to better reflect the feature-set it offers. Boost.Http currently only provides a server-side API, but the reviewers felt that a client-side API would be usable to more users. There was also a recurring request for Boost.Http to be a header-only library. The HTTP parser currently used is not header-only and that is the main obstacle towards a header-only Boost.Http library. Some of the discussion revolved around what level of abstraction would be appropriate for Boost.Http. The views ranged from wanting higher- level APIs all the way down to simply wanting a HTTP parser/generator and then leave all the socket and buffer management up to the user. Regarding the HTTP parser/generator, there is no reason why it cannot be a separate Boost library. However, Vinicius correctly pointed out that this is insufficient for a HTTP server framework that handles multipleback-ends (e.g. HTTP/2, FastCGI, or WebSocket). By implication it cannot handle HTTP upgrade requests either. Some reviewers also felt that HTTP/2 should be part of Boost.Http, partly because that would demonstrate the extensibility of the current design, and partly because the library would be in a stronger position to attract users if it offers more than its competitors. There was concern about whether or not the Boost.Http API can be extended to HTTP/2. The main challenge with HTTP/2 is fitting multiplexing into the API. Vinicius suggested that there should be a http::socket per multiplexed channel, so it will be transparent to the user if several of his http::sockets to the same remote endpoint are transported via the same TCP socket. This will keep the API clean when extended to HTTP/2. Boost.Http currently creates an associative array for all header fields. One reviewer explored the idea of using an incremental (push or pull) HTTP parser as part of the API to let users decide which header fields to copy and which to discard. There was a general consensus that more examples are needed, and that the tutorial should have smaller examples. The Boost.Http code base currently builds with CMake. This must be converted into Boost.Build before being integrated into the Boost code base. Several other third-party tools were suggested, but as these are not requirements for inclusion into Boost I will leave the decision to the author. As for the future, I hope that Vinicius is not too discourage by the current rejection, and that he will consider re-submitting the library at a later stage. Judging from the reviews, the following additions will make a future submission more likely to succeed: 1. Involve the community more during the development. This will both solicit earlier feedback on the design, and help to align community expectation. 2. Provide a client-side API. 3. Design higher-level APIs on top of the low-level APIs. 4. Better documentation and more examples. I also hope that people in the community will consider contributing to the library. For example, a good opportunity is to help creating the higher-level APIs. Another opportunity is to help with the (header- only, possibly incremental) HTTP parser/generator, which could be a separate library. _______________________________________________ Unsubscribe & other changes: http://lists.boost.org/mailman/listinfo.cgi/boost

1 0

[boost] [afio] Formal review of Boost.AFIO
by Ahmed Charles 23 Aug '15

23 Aug '15

The formal review of the Boost.AFIO library starts, August 21st and ends on Monday August 31st. Boost.AFIO provides a portable API implementing synchronous and asynchronous race-free filesystem and scatter-gather file i/o. It requires a minimum of C++ 11. It has minimum dependencies on a Filesystem TS and a Networking TS implementation (e.g. Boost.Filesystem and Boost.ASIO). Backends are provided for the Windows NT kernel and POSIX. The utility of a portable library providing strong concurrent race guarantees about filesystem and file i/o can be seen in its tutorial where a transactional ACID key-value store is built from first principles. Boost.AFIO was brought to Boost as part of GSoC 2013 and Niall Douglas has continued to develop and improve the library since then, generating two internal implementation libraries Boost.APIBind and Boost.Monad which are expected to be separately brought for Boost review in 2016. The documentation can be found here: https://boostgsoc13.github.io/boost.afio/doc/html/afio.html The source code can be found here: https://github.com/BoostGSoC13/boost.afio/tree/boost-peer-review Online web compiler playpen can be found here: http://melpon.org/wandbox/permlink/DR8wCpu5Rl20GMdM? Please answer the following questions: 1. Should Boost.AFIO be accepted into Boost? Please state all conditions for acceptance explicity. 2. What is your evaluation of the design? 3. What is your evaluation of the implementation? 4. What is your evaluation of the documentation? 5. What is your evaluation of the potential usefulness of the library? 6. Did you try to use the library? With what compiler? Did you have any problems? 7. How much effort did you put into your evaluation? A glance? A quick reading? In-depth study? 8. Are you knowledgeable about the problem domain? _______________________________________________ Unsubscribe & other changes: http://lists.boost.org/mailman/listinfo.cgi/boost

1 0

[boost] Boost 1.59.0 has been released
by Marshall Clow 13 Aug '15

13 Aug '15

Release 1.59.0 of the Boost C++ Libraries is now available. These open-source libraries work well with the C++ Standard Library, and are usable across a broad spectrum of applications. The Boost license encourages both commercial and non-commercial use. This release contains two new libraries and numerous enhancements and bug fixes for existing libraries. New Libraries * Convert: An extendible and configurable type-conversion framework, from Vladimir Batov. * Coroutine2: from Oliver Kowalke For details, including download links, see http://www.boost.org/users/news/version_1.59.0 You can also download directly from SourceForge: http://sourceforge.net/projects/boost/files/boost/1.59.0/ To install this release on your system, see http://www.boost.org/doc/libs/release/more/getting_started/index.html Thanks, --The Boost release team Vladimir Prus Rene Rivera Marshall Clow Eric Niebler Daniel James Beman Dawes _______________________________________________ Unsubscribe & other changes: http://lists.boost.org/mailman/listinfo.cgi/boost

1 0

[boost] [http] Formal review of Boost.Http
by Bjorn Reese 07 Aug '15

07 Aug '15

Dear Boost and ASIO communities. The formal review of Vinícius dos Santos Oliveira's Boost.Http library starts today, August 7th and ends on Sunday August 16th. Boost.Http is designed for various forms of modern HTTP interaction, from normal HTTP request, over HTTP chunking and pipelining, to upgrading to other web protocols like WebSocket. This library builds on top of Boost.ASIO, and follows the threading model of ASIO. The two basic building-blocks are http::socket, which is socket that talks HTTP, and http::message with contains HTTP meta-data and body information. You can use these building-blocks to build a HTTP server that fits your exact needs; for instance, an embedded HTTP server for a ReST API. Boost.Http comes with a light-weight HTTP server and a static file server. Currently, Boost.Http is limited to server-side interaction, but the design principles used extends to client-side as well. Boost.Http was originally developed as part of GSoC 2014 and Vinícius has continued to develop and improve the library since then. The documentation can be found here: http://boostgsoc14.github.io/boost.http/ The source code can be found here: https://github.com/BoostGSoC14/boost.http The source code is build using CMake, but Boost.Build is in the pipeline (already done for documentation.) Please answer the following questions: 1. Should Boost.Http be accepted into Boost? Please state all conditions for acceptance explicity. 2. What is your evaluation of the design? 3. What is your evaluation of the implementation? 4. What is your evaluation of the documentation? 5. What is your evaluation of the potential usefulness of the library? 6. Did you try to use the library? With what compiler? Did you have any problems? 7. How much effort did you put into your evaluation? A glance? A quick reading? In-depth study? 8. Are you knowledgeable about the problem domain? _______________________________________________ Unsubscribe & other changes: http://lists.boost.org/mailman/listinfo.cgi/boost

1 0