April 2013 - Boost-users - lists.boost.org

publish/subscribe/message architecture using boost
by Sean Farrow 07 Apr '13

07 Apr '13

Hi all, I 'm currently looking at redesigning an application and changing to boost/c++11 library components. The application reads data from an input, processes the data and then send it to an output. The current architecture is one thread per "device" where a device is a pair of input/output ports and one processing stage. What I'd like to do is move this to either a publish/subscribe model or some form of message-based system where an input comes in and a message is then sent to the next stage of the process. All stages will happen on the same physical/virtual machine. Are there any good pub/subscribe or message-based components using the boost architecture that works on mac osx/win32. Any help appreciated. Regards Sean.

3 3

Re: [Boost-users] [boost][thread] Future returning 0xfeeefeee
by Stefan Strasser 06 Apr '13

06 Apr '13

Zitat von Klaim - Joël Lamotte <mjklaim(a)gmail.com>: > My current suspicion: maybe I do something wrong with the lifetime of the > promise? > I don't see what unfortunately. your example is not easy to read. IIUC, after execute(), the work queue is emptied and the last shared_ptr to struct K goes out of scope. K contains your promise and the future associated with it is accessed after the promise has been destroyed. try a breakpoint in the destructor of K to make sure, I don't have tbb installed to test.

2 2

[boost][thread] Future returning 0xfeeefeee
by Klaim - Joël Lamotte 06 Apr '13

06 Apr '13

I'm stuck with a problem I quite don't understand and that involve either boost::future/promise or tbb::concurrent_queue, or my understanding of using both. I think there is a high probability that someone here will point to the problem, but I will report too to the tbb forum Some context: - I'm using VS2012 Update 2 - it's 32 bit DEBUG mode - I use Boost.Thread V4 (in CMake I set "add_definitions( -DBOOST_THREAD_VERSION=4 )" to force it ) - I use TBB 4.1 Update 2 I've setup a test (using GTest) which reproduce the problem: ############ int TRUC = 42; TEST( Test_WorkQueue, future_promise_shared_work ) { WorkQueue work_queue; // I'm doing this like that because it reflect the use case I have, // I didn't find another way to have the promise alive in a container which don't allow move semantic auto do_some_work = [&]()-> boost::future<int*> { struct K { boost::promise<int*> promise; void foo() { promise.set_value( &TRUC ); } }; auto object_ptr = std::make_shared<K>(); // D: work_queue.push( [=] { object_ptr->foo(); }); return object_ptr->promise.get_future(); }; auto ft_value = do_some_work(); work_queue.execute(); auto value = ft_value.get(); ASSERT_EQ( &TRUC, value ); // this fails, value == 0xfeeefeee } ########## My WorkQueue type use tbb::concurrent_queue and is defined as: ########## class WorkQueue { public: template< class WorkTask > void push( WorkTask&& task ) { m_task_queue.push( std::forward<WorkTask>( task ) ); } /** Execute all the work queued until now. */ void execute() { if( m_task_queue.empty() ) return; bool end_of_work = false; m_task_queue.push( [&]{ end_of_work = true; } ); std::function<void()> work; while( !end_of_work && m_task_queue.try_pop( work ) ) { work(); } } private: mutable tbb::concurrent_queue< std::function<void()> > m_task_queue; }; ############ It's basically a simple wrapper around the concurrent_queue, but maybe the execute() code have an impact. THE PROBLEM: The test fails. value == 0xfeeefeee as soon as the get() call is done. Using the debugger, I can't figure where the data is lost. It seem that everything is correct until when all the hierarchy of function call returns the result...which is different and wrong once out of the function. I first wrote this test with std::vector< std::function<void()> > instead of the concurrent queue to check if it was boost::future/promise which was not working well with Boost.Thread V4. With the vector instead of concurrent_queue, the code works perfectly. Does someone have an idea what is going on? Joel Lamotte

1 2

Re: [Boost-users] Boost-users] publish/subscribe/message architecture using boost
by Brian Wood 06 Apr '13

06 Apr '13

Sean Farrow writes: > Hi all, > I''m currently looking at redesigning an application and changing to > boost/c++11 library components. The application reads data from an input, > processes the data and then send it to an output. The C++ Middelware Writer (CMW) may be of interest. The application you mention sounds similar to the middle tier of the CMW -- http://webEbenezer.net/build_integration.html http://webEbenezer.net/misc/cmwAmbassador.hh http://webEbenezer.net/misc/cmwAmbassador.cc > The current architecture is one thread per "device" where a device is a > pair of input/output ports and one processing stage. What I'd like to > do is move this to either a publish/subscribe model or some form of > message-based system where an input comes in and a message is then > sent to the next stage of the process. All stages will happen on the same > physical/virtual machine. Are there any good pub/subscribe or > message-based components using the boost architecture that works > on mac osx/win32. We don't have pub/subscribe support, but the CMW is a message-based middleware. -- Brian Wood Ebenezer Enterprises - in G-d we trust. http://webEbenezer.net (651) 251-9384

1 0

Scope Tracer or General Scope Function with parameter or variable values
by Anlin Zhang 05 Apr '13

05 Apr '13

Hi, I'm wondering if a "Scope Tracer" or a "General Scope Function" can be easily implemented with existing boost libraries now. One example use case is to log variable or parameter values or any program state when entering or leaving a scope, but it can do more than just logging, it can, for example, lock/unlock mutex, or prepare/teardown test cases, etc. For logging requirement, to give you an idea, the expected log message looks like this: >04/10/09 05:29:12:210257 entering func foo with parameter a=10, b=1.5, d.x=10, d.y=[string], global d=2, filename:test.cpp>04/10/09 05:29:12:210257 entering while() a=10, b=1.5, d.x=10>04/10/09 05:29:12:210257 leaving while() a=9, b=1.5, d.x=9>04/10/09 05:29:12:210257 entering while() a=9, b=1.5, d.x=9>04/10/09 05:29:12:210257 leaving while() a=8, b=1.5, d.x=8>...>04/10/09 05:29:12:210257 entering while() a=2, b=1.5, d.x=2>04/10/09 05:29:12:210257 leaving while() a=1, b=1.5, d.x=1>04/10/09 05:29:12:210257 entering while() a=1, b=1.5, d.x=1>04/10/09 05:29:12:210257 leaving while() a=0, b=1.5, d.x=0>04/10/09 05:29:12:210257 leaving function foo with parameter a=0, b=1.5, d.x=0, d.y=[string], global d=2, filename:test.cpp It does not have to be logging, it can do any general processing when entering/leaving a scope. I implemented a small library to do so in 2008 mainly for tracing, it worked fine for me and I never revisited it again until recently. Wondering if boost has libraries to support such a requirment. My implementation has a template class logger_class which can manage the log-level at runtime and send the log message to standard-output or other places. Application code use a macro to invoke the library, the macro can be disabled at compile time, or weakened to only log scope without variables. Example of the macro definition: #ifdef ENABLE_ONLY_SCOPE_TRACER #define SCOPE_TRACER(logger_class, logger, args, level, scope) \ scope_tracer<logger_class> tracer_obj(logger, __FUNCTION__, __FILE__, __LINE__); \ if (logger.get_level() >= level){ \ tracer_obj.init(level, scope).noMore(); \ } #else #ifdef DISABLE_SCOPE_VAR_TRACER #define SCOPE_TRACER(logger_class, logger, args, level, scope) #else #define SCOPE_TRACER(logger_class, logger, args, level, scope) \ scope_tracer<loggerClass> tracer_obj(logger, __FUNCTION__, __FILE__, __LINE__); \ if (logger.get_level() >= level){ \ tracer_obj.init(level, scope) << args; \ tracer_obj.noMore(); \ } #endif#endif Application code example: int globalVar; void MyClass::func1( A a, B&b, C* c, int d, std::string & s){ SCOPE_TRACER(MyLogger, test_logger, a<<b<<c<<d<<s<<globalVar, LOG_LEVEL_TRACE, "func1"); ... int localVar; while(x){ SCOPE_TRACER(MyLogger, test_logger, x<<a<<b<<c<<d<<s<<globalVar<<localVar, LOG_LEVEL_TRACE, "while(x)"); ... } ... } As you see, "<<" operator is being used. But it does not have to be only "<<" operator. Basically any C++ operator can be supported between the logger class and logged type. And the logger_class is not limited to just do tracing, it can virtuall do anything. I can attach the code if needed. The code was compiled with GCC on linux and VisualStudio on Windows. If the above functionality can be easily achieved using existing boot library, please advise how. Otherwise is it worth to request such a feature in boost? Thanks,Anlin

1 0

Visual C++ 11 cannot find Boost unit_test_framework library in CMake generated project
by Emre Şahin 05 Apr '13

05 Apr '13

I have a C++ project using CMake and Boost that compiles/links under Linux without any problems. I'm working towards porting this to Windows via Visual C++ 2012. My CMake configuration is as follows: set(BOOST_ROOT ${DEPENDENCY_DIR}/boost/) set(Boost_USE_STATIC_LIBS ON) set(Boost_USE_MULTITHREADED ON) set(Boost_USE_STATIC_RUNTIME OFF) find_package(Boost 1.53 COMPONENTS system date_time chrono serialization filesystem program_options random thread regex unit_test_framework) message(STATUS "Boost Version:" ${Boost_VERSION}) message(STATUS "Boost Include Dirs:" ${Boost_INCLUDE_DIR}) message(STATUS "Boost Libraries:") foreach(lib ${Boost_LIBRARIES}) message(STATUS ${lib}) endforeach() include_directories(${Boost_INCLUDE_DIR}) and I'm using `target_link_libraries` with `${Boost_LIBRARIES}` in my targets. Also above `message` commands show all found files without any problem. Moreover required libraries show `libboost_unit_test_framework-vc110-mt-gd-1_53.lib` as it should be. (Screenshot: http://i.stack.imgur.com/UgPTG.png) However, when I build one of the targets, I get 2>LINK : fatal error LNK1104: cannot open file 'boost_unit_test_framework-vc110-mt-gd-1_53.lib' I removed another Boost library and from the error it seems the linker is able to find others. (like `chrono` or `serialization`.) But the error message is a bit different. The filename has _lib_ in front of it. 2>LINK : fatal error LNK1104: cannot open file 'libboost_serialization-vc110-mt-gd-1_53.lib' Why does VC++ looks for a file prefixed with **boost** and not **libboost** for unit_test_framework? Best Regards, Emre PS: This is crossposted to http://stackoverflow.com/questions/15815467/ if you like to answer there.

3 2

Boost-enabled loosely coupled ORM serialization
by Michael Powell 05 Apr '13

05 Apr '13

Hello, I am coming up on a decision in the architecture I am working on. I want to serialize some domain data to a data store. I'm aware boost has serialization features, which I'd like to explore further. I'm coming at this first from a boost standpoint because I am successfully building upon it for other parts of the engine and domain model, so boost is available right now. I am expecting I might go with a third-party library like ODB, Wt::Dbo, or something like that. Also, background, I am no stranger to ORM concepts. I was first exposed to them through Java, C# .NET, and have dealt with Hibernate, NHibernate, Fluent NHibernate, and so on. So vocabulary-wise, grammar-wise, we're talking the same language. Also, I'll defer backend decisions until later. Probably that will be somewhat determined by target platform support and so on: landing on ArchLinux ARM. For now, my focus for now is on keeping ORM intersection with my domain as loosely coupled as possible. For anyone versed in ORM nuances, for obvious reasons, I want for the ORM to be as transparent through the domain model as possible. I want to steer clear of the active record anti-pattern whenever possible. I'd like to gear up for a repository pattern whenever feasible. No time to get into that discussion why I believe these are patterns or anti-patterns. That's a separate blog for another time. Wrappers like smart pointers, smart collections, are understandable, and may be the way to go, but put opaqueness layers between end-users of the domain objects and the rest of the model. Will use them if I must, but I'd like to avoid them if possible. Additionally, given some language "features", perhaps "limitations" if you will, of C++11, as contrasted with a C# let's say, I also want for any ORM code, whether meta-programmed or not, to be as non-intrusive to the domain model as possible. I've seen a ton of code that have persist methods, friend access, macros, and such. Sounds like a tall order I know. Call me spoiled on the "niceness" of .NET, Reflection, and so on. More likely I'm getting reacquainted with the practicalities of using a paradigm-rich language like C++11. Now back to the "real world" what the rest of us deal with. Realistically, a sober look at it, I believe there will be tradeoffs: SOLID is my goal, sufficiently extensible to meet the seams we'll need to meet, yet maintainable at the end of the day. Regards, Michael Powell

3 2

Signals2 event broker framework
by Michael Powell 05 Apr '13

05 Apr '13

Hello, I am interested to put an event broker system into practice in our architecture. Since we're using boost successfully already, Signals2 seems like the most likely candidate. At the moment, this is intra-process, most likely inter-thread but for now that's not the concern. Just getting event signals from point A to points B, C, D in pub/sub manner, however, is. http://www.boost.org/doc/libs/1_53_0/doc/html/signals2.html If I can abstract that out further, for instance I noticed there was an C# event-like abstraction someone published as an add-on feature to boost a little while back, handled subscriptions through +=, -= operator overloads, that sort of thing, would be helpful, but probably not completely necessary. If I can loosely couple subscribers from publishers is also desired. Something like bbv EventBroker ( http://code.google.com/p/bbvcommon/wiki/EventBroker) is to C#. That'll keep things nice and loosely coupled, so that if we ever need to get more distributed (i.e. via a CORBA or ZeroC) we can potentially do so. Regards, Michael Powell

1 0

dynamic_bitset get block_type not ulong
by Michael Powell 05 Apr '13

05 Apr '13

Hello, How do I get at the block_type value itself, not an unsigned long, from a dynamic_bitset (or std::bitset for that matter). For instance, can I do something like this? typedef unsigned char byte; boost::dynamic_bitset<byte> my_bitset(static_cast<byte>(0x00)); //Do some bit twiddling... byte my_value = static_cast<byte>(my_bitset); Or something like that. Basically I want to avoid any to_ulong() mumbo jumbo if I can just get at the underlying block_type value. Thank you... Regards, Michael Powell

1 3

Problem with Serialization: invalid signature
by Alexander Striffeler 04 Apr '13

04 Apr '13

Hi all I have some trouble with the serialization of objects in C++ using boost. Since there was some strange behaviour in the code, I tried to serialize and deserialize a sample object isolated trying two versions: |deSerialize(Packet p1, Packet p2){ // Version 1 using stringstreams std::ostringstream *serialized = new std::ostringstream[2];|| ||serialized[0]=std::ostringstream(std::ios_base::binary);|| ||serialized[1]=std::ostringstream(std::ios_base::binary);|| || || boost::archive::text_oarchive oa(serialized[0]);|| || oa << p1;|| || || boost::archive::text_oarchive oa2(serialized[1]);|| || oa2 << p2;|| || || std::string s1, s2;|| || || s1 = serialized[0].str();|| || s2 = serialized[1].str();|| || || //deserialize CCNDataPkt newPacket; std::istringstream inputStream(s2, std::ios_base::binary); boost::archive::text_iarchive ia(inputStream); | | ia >> newPacket;| // throws boost::archive::archive_exception: invalid signature. } and |deSerialize(Packet p1, Packet p2){ // Version 2 using ofstreams ||std::ofstream of("deleteme",std::ios_base::binary);|| || boost::archive::binary_oarchive oa(of);|| || oa << p1;|| || || std::ifstream ifstr("deleteme", std::ios_base::binary);|| || CCNDataPkt newp;|| || boost::archive::binary_iarchive ia(ifstr);|| | | ia >> newp;| // boost::archive::archive_exception: invalid signature. } However, both variants returned an invalid signature exception even though I haven't changed anything on the serialized data. Does anyone know what is wrong in either of the examples above? The methods for serializing the custom object 'Packet' are implemented according to the boost serialization tutorial (non-intrusive version splitted) Any hints are very much appreciated - TIA! Cheers, Alex

4 5

[Parallel BGL] Error during building library
by Nikos Kyrtatas 04 Apr '13

04 Apr '13

In order to build Parallel BGL 0.7.0 beta, I first used cmake: ~/project/lib> cmake parallel-bgl-0.7.0/ -- The C compiler identification is GNU -- The CXX compiler identification is GNU -- Check for working C compiler: /usr/bin/cc -- Check for working C compiler: /usr/bin/cc -- works -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working CXX compiler: /usr/bin/c++ -- Check for working CXX compiler: /usr/bin/c++ -- works -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Configuring done -- Generating done -- Build files have been written to: /home/nkyrtata/project/lib and then make: ~/project/lib> make -- Configuring done -- Generating done -- Build files have been written to: /home/nkyrtata/project/lib Scanning dependencies of target boost_graph_mpi [ 2%] Building CXX object libs/graph_parallel/src/CMakeFiles/boost_graph_mpi.dir/mpi_process_group.cpp.o [ 5%] Building CXX object libs/graph_parallel/src/CMakeFiles/boost_graph_mpi.dir/tag_allocator.cpp.o Linking CXX static library ../../../lib/libboost_graph_mpi.a [ 5%] Built target boost_graph_mpi Scanning dependencies of target adjlist_build_test [ 8%] Building CXX object libs/graph_parallel/test/CMakeFiles/adjlist_build_test.dir/adjlist_build_test.cpp.o In file included from /home/nkyrtata/project/lib/parallel-bgl-0.7.0/boost/graph/distributed/adjacency_list.hpp:3961:0, from /home/nkyrtata/project/lib/parallel-bgl-0.7.0/libs/graph_parallel/test/adjlist_build_test.cpp:10: /home/nkyrtata/project/lib/parallel-bgl-0.7.0/boost/graph/distributed/adjlist/serialization.hpp: In function ‘std::vector<int> boost::detail::parallel::available_process_files(const string&)’: /home/nkyrtata/project/lib/parallel-bgl-0.7.0/boost/graph/distributed/adjlist/serialization.hpp:97:61: error: conversion from ‘boost::filesystem3::path’ to non-scalar type ‘std::string {aka std::basic_string<char>}’ requested make[2]: *** [libs/graph_parallel/test/CMakeFiles/adjlist_build_test.dir/adjlist_build_test.cpp.o] Error 1 make[1]: *** [libs/graph_parallel/test/CMakeFiles/adjlist_build_test.dir/all] Error 2 make: *** [all] Error 2 I am using Ubuntu 11.10, gcc 4.6.1 and boost 1.52. Any help would be greatly appreciated.

2 1

[program options] compile error if BOOST_NO_EXCEPTIONS defined
by Olaf Krzikalla 04 Apr '13

04 Apr '13

Hi, MSVC 2008, program_options/variables_map.cpp: try without catch error, if BOOST_NO_EXCEPTIONS is defined. Fixable by wrapping the try on line 46: + #ifndef BOOST_NO_EXCEPTIONS try + #endif Best Olaf

1 0

[Boost.Coroutine] Problem compiling simple code with c++98 compiler
by Lukas Czaja 03 Apr '13

03 Apr '13

Hi, i was checking if my code is compatible with c++98 standard and i've encounterd compile error. With -std c++11 option everything works fine. Below i've written code causing same problem. #include <boost/coroutine/coroutine.hpp> #include <boost/coroutine/attributes.hpp> typedef boost::coroutines::coroutine<void( boost::system::error_code , std::size_t)> coro_t; struct coro_test{ coro_test() {} void coro_fun(typename coro_t::caller_type& ca)const{ boost::system::error_code ec; boost::tie(ec, boost::tuples::ignore) = ca.get(); ca(); } coro_t coro; }; int main(int argc, char *argv[]) { { boost::system::error_code ec; coro_t coro2; //default construction is ok coro_test ctest; //compile error , why ??? coro_t coro( boost::bind(&coro_test::coro_fun, &ctest, _1),coro_t::arguments( ec, 7)); coro = coro_t(boost::bind(&coro_test::coro_fun, &ctest, _1),coro_t::arguments( ec, 7)); } ... /usr/local/include/boost/type_traits/is_function.hpp:50: błąd:forming pointer to reference type 'boost::rv<boost::coroutines::coroutine<void(boost::system::error_code, long unsigned int)> >&' /usr/local/include/boost/type_traits/is_function.hpp:102: błąd:'value' is not a member of 'boost::detail::is_function_impl<boost::rv<boost::coroutines::coroutine<void(boost::system::error_code, long unsigned int)> >&>' /usr/local/include/boost/type_traits/is_convertible.hpp:354: błąd:'value' is not a member of 'boost::is_function<boost::rv<boost::coroutines::coroutine<void(boost::system::error_code, long unsigned int)> >&>' /usr/local/include/boost/utility/enable_if.hpp:59: błąd:'value' is not a member of 'boost::is_convertible<boost::coroutines::coroutine<void(boost::system::error_code, long unsigned int)>&, boost::rv<boost::coroutines::coroutine<void(boost::system::error_code, long unsigned int)> >&>' I work with Qt, g++ compiler on ubuntu 12.10 Is this library bug ?

2 3

[serialization] serializing a pointer without causing object tracking
by Stefan Strasser 02 Apr '13

02 Apr '13

Hi everyone, Hi Robert, in case you'd like to answer this one, because I have a rather specific question about your library. Thank you in advance! I'd like to serialize an object and later reconstruct it from the serialized data: void save(T const &t){ ar << t; } T* load(){ T *t=new T(); //error ar >> *t; } T might not have a default constructor. so load_construct_data should be used. apparently the way to do this is to serialize through a pointer: void save(T const *t){ ar << t; } T *load(){ T *t; ar >> t; } this works, but it causes the type T to be tracked, if its object tracking is set to track_selectively. I don't want that. but I can't set it to track_never either, because if the type is serialized at another point in the program through a pointer, the type should be tracked. is there a solution to this? is there a serialization wrapper that says "don't track this type just because of this pointer"? what comes to mind as a solution is serializing as an object, and calling load/save_construct_data manually. but then there is another problem: void save(T const &t){ save_construct_data(t,version<T>::value); ar << t; } void load(T *unconstructed_t){ load_construct_data(unconstructed_t, ??? ); ar >> *t; } if the implementation level of T is object_class_info, the object version is loaded from the preamble when the object itself is loaded. there is no in between loading the version and loading the object, it's entirely handled in the non-header part of the library. so basically I have a solution when the implementation level is object_serializable (no version info, call load_construct_data manually), and when tracking is set to track_never (serialize as a pointer). but not for the default case, object_class_info with track_selectively. am I missing something? Stefan

3 6

Problems with stl::map
by Michael Powell 02 Apr '13

02 Apr '13

Hello, Perhaps there is a boost answer for this, I don't know. I have a typedef unsigned char byte defined in global scope. Then a typedef byte address_type defined in the scope of a class. I'd like to setup a std::map<address_type, byte> if at all possible. Or just in general, use std::map, but it doesn't seem to like anything I give it. I am building using GCC 4.7.2 cross compiling to ARM through Sourcery CodeBench for ARM. Kind of at a loss. Regards, Michael Powell

4 5

safe check if lockfree::queue is empty
by niXman 02 Apr '13

02 Apr '13

Hi, I read the docs about lockfree::queue::empty() and understang what this way is not safe in multithreaded program. The question is, how can I verify that the queue is empty? Will it be correct the following code? bool empty() { T *tmp = 0; if ( queue.pop(tmp) ) { queue.push(tmp); return false; } return true; } Thanks. -- Regards, niXman ___________________________________________________ Dual-target(32 & 64-bit) MinGW compilers for 32 and 64-bit Windows: http://sourceforge.net/projects/mingwbuilds/ ___________________________________________________ Another online IDE: http://liveworkspace.org/

2 2

Good lock_guard<mytype> example
by Michael Powell 02 Apr '13

02 Apr '13

Hello, The pattern goes something like this: boost::lock_guard<mytype> guard(*this). However, compiler is asking for a lock or unlock. I don't know what this is, or what it should be. Thank you... Regards, Michael Powell

4 4

Newbie Interprocess message_thread user
by John Davies 01 Apr '13

01 Apr '13

I'm new to Boost and new to Linux. But old to Windows. So I'm doing some initial development in Windows XP. I have two executables made in different projects. I planned on using a message_queue to communicate between the two applications. But sending a message from one app does not make it to the other. I can add and handle messages from one thread to another within the same application. SO I know I have things partially setup correctly. But now I'm at a complete loss. Should two exe files be able to communicate through Boost message_queues? Or am I misunderstanding the whole thing?

2 2

[Boost.Container] missing image in the documentation
by ilya shlyakhter 01 Apr '13

01 Apr '13

At the URL http://www.boost.org/doc/libs/1_53_0/doc/html/container/non_standard_contai… the illustration of stable vector is missing.

2 1

How should I define a wchar_t type for use in mbtowc? [Android] [Serialization]
by Wesley Paugh 01 Apr '13

01 Apr '13

I'm attempting to port Serialization code to Android. Android-ndk-r8d does not have mbtowc implemented, which Serialization apparently uses, somewhere. I would like to recreate this function myself, rather than find another Serialization library entirely or write one myself. The function leverages the wchar_t type, which also does not appear to built into android-ndk-r8d. What is boost serialization expecting this type to be? Can I grab an implementation of it from off of a shelf somewhere?

2 1