- Boost-users - lists.boost.org

RE: [Boost-Users] cluttered mail
by Garriss, Michael 25 Sep '02

25 Sep '02

Cluttered mailbox? Come on now, most modern mail clients include some sort of option to have mail from certain senders moved to a special folder..... -----Original Message----- From: Rama Rao M.V. [mailto:ramu_mallela@yahoo.com] Sent: Wednesday, September 25, 2002 3:55 AM To: Boost-Users(a)yahoogroups.com Subject: Re: [Boost-Users] Boost Python and VC7.1 ( Everett ) Please tell me how to UNSUBSRIBE to Boost. My mail box is getting cluttered with mails Rama Rao --- Bernhard Glueck <bernhard(a)realspace.org> wrote: > Since we switched our projects to the new VC7.1 C++ > Compiler ( MSVC 1310 ) recently i am not able to > compile Boost Python anymore. > The question is, if that's not supported at all, or > if there is a workaround to do this. ( Compiling > with VC7.0 works fine for me ) > > I upgraded to the most recent CVS version of Boost > today, but still no luck ( using bjam "-sTOOLS=vc7" > ) at least it does not spit out a "Unknown compiler > version" warning anymore.... > > Any clues? > > Thanks, > Bernhard Glueck > > [Non-text portions of this message have been > removed] > > > ===== M.V.Rama Rao __________________________________________________ Do you Yahoo!? New DSL Internet Access from SBC & Yahoo! http://sbc.yahoo.com Yahoo! Groups Sponsor ADVERTISEMENT Info: <http://www.boost.org> Wiki: <http://www.crystalclearsoftware.com/cgi-bin/boost_wiki/wiki.pl> Unsubscribe: <mailto:boost-users-unsubscribe@yahoogroups.com> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

1 0

Unsubscribe [was: RE: [Boost-Users] Boost Python and VC7.1]
by Björn Karlsson 25 Sep '02

25 Sep '02

> From: Rama Rao M.V. [mailto:ramu_mallela@yahoo.com] > Please tell me how to UNSUBSRIBE to Boost. My mail box > is getting cluttered with mails > Rama Rao Assuming you have tried (without success) the link included in each of the messages "cluttering" you mailbox, please send a note to the list administrators, and we'll do it manually for you. > Unsubscribe: <mailto:boost-users-unsubscribe@yahoogroups.com> Regards, Bjorn Karlsson Moderator

1 0

RE: [Boost-Users] Boost Python and VC7.1 ( Everett )
by Jim.Hyslop 25 Sep '02

25 Sep '02

Rama Rao M.V. [mailto:ramu_mallela@yahoo.com] wrote: > Please tell me how to UNSUBSRIBE to Boost. My mail box > is getting cluttered with mails I'll give you a hint - look at the bottom of any message sent via the newsgroup. There are instructions right there. -- Jim

1 0

metaprogramming and MPL
by Ihsan Ali Al Darhi 25 Sep '02

25 Sep '02

Hi... I am interested in metaprogramming and Boost mpl. But I can't find a complete doc about the two subjects together. Where on the net I can such info? Mohammed

1 0

Really dumb question from g++ newbie
by Craig Henderson 25 Sep '02

25 Sep '02

I've developed my library with MSVC7 and am now trying to test on as many compiler as possible. Using g++ 2.95.3-5 on cywin, I get a compiler error using std::distance `distance' undeclared in namespace `std' I have tried all the obvious includes, but the problem seems to be a configuration issue for using namespaces. The code compiles on VC7/Dinkumware, VC7/STLport-4.5.3 and BCC 5.5.1 so I am confident that there is no error in the code itself. Could someone please point me in the right direction? TIA -- Craig

4 5

RE: (unknown)
by Mark Storer 24 Sep '02

24 Sep '02

Nope. Container-agnostic code is a red herring. Don't bother, you'll only be waisting your time. "Effective STL" covers this in detail in Chapter 1, item 2, far better than anything I could come up with. You might be able to come up with 'map' and 'everything else' versions of your code, but even that will have some unexpected side effects. Now, having said all that, here's an idea (I seem to be developing a habit of contradicting myself): Accept as part of the enumerator template an 'accessor', one that would default to returning the contents of the iterator, but could be replaced with something that extracted "->second". Your code would end up looking something like this: // WARNING: This code hasn't been anywhere near a compiler. template <typename T> struct accessor { typedef T::value_type accessee; accessee &operator()( T &t ) { return *T; } }; template <typename T> struct map_accessor { typedef T::value_type::second accessee; accessee &Map_Accessor( T &t ) { return t->second; } }; template <typename T, typename acc = Accessor<T>> EnumCols( T &begin, T &end, acc accessor ) { T cur; if(begin == end) return; // get matrix width size_t rows = acc( begin ).size(); for(int i = 0; i < rows; ++i) { cur = begin; while(cur != end) { // a useful EnumCols would have to take some // sort of function as a paramenter and use // it to replace DO_STUFF below DO_STUFF( acc(cur)[i] ); ++cur; } } } EnumCols( matrix.begin(), matrix.end(), Map_Accessor<matrix's type> ); // for maps or EnumCols( matrix.begin(), matrix.end()); // for everything else These function templates could either exist stand-alone, or as some sort of 'container-traits'. The traits tact would force you to wrap all the containers you actually wanted to use with templates that defined the appropriate traits, but would allow the actual enumeration code to be considerably cleaner (through default template params). But all this involves rolling your own code, which would place this conversation firmly in the "other" boost list. --Mark Storer Software Engineer Cardiff Software #include <disclaimer> typedef std::disclaimer<Cardiff> Discard; -----Original Message----- From: Antonio Piccolboni [mailto:antonio_piccolboni@affymetrix.com] Sent: Tuesday, September 24, 2002 12:01 PM To: Boost-Users(a)yahoogroups.com Subject: [Boost-Users] (unknown) Dear Boosters Suppose you have a matrix represented raw-wise with a vector< vector <float > > and you want to iterate over the coloumns. Easy with the projection adaptor. But life is never so easy. My matrix is represented raw wise by a map <vector <float> > and I need the same kind of iterator. There is no way I can get my code to compile. I think the problem is that vector iterators return values, map iterators retun pairs <key,value> (that is, references to the above). And this seems not only to doom my attempt at defining this n-th dim projection iterator, but even more so and fundamentally, it seem to preclude my ultimate goal of defining a projection for any container1 <containr2 < element_type > > where container2 two is random access. Any help would be appreciated and if I make it to the larger goal, I will return it to the community. Thanks Antonio Header #ifndef GRAPH_H #define GRAPH_H #include <boost/config.hpp> #include <vector> #include <iostream> #include <iterator> #include <algorithm> #include <boost/iterator_adaptors.hpp> //typedef pair<long, vector<float> > graph_element; typedef vector<float> graph_element; template <int index> struct select_component { typedef pair < long, graph_element > argument_type; typedef float result_type; const float & operator()(const graph_element & r) const { return r.second[index]; } float & operator()(graph_element & r) const { return r.second[index]; } }; #endif Would be test code #include "graph.h" #include <map> #include<vector> int main(int, char*[]) { typedef map < long, graph_element > graph; graph aGraph; aGraph[0].push_back(0.00); aGraph[0].push_back(0.01); aGraph[0].push_back(0.02); aGraph[1].push_back(0.10); aGraph[1].push_back(0.11); aGraph[1].push_back(0.12); aGraph[2].push_back(0.20); aGraph[2].push_back(0.21); aGraph[2].push_back(0.22); aGraph[3].push_back(0.30); aGraph[3].push_back(0.31); aGraph[3].push_back(0.32); boost::projection_iterator_generator < select_component < 0 >, graph::iterator >::type graph_first(aGraph.begin()), graph_last(aGraph.end()); copy(graph_first, graph_last, ostream_iterator<float>(cout, "\n")); cout << endl; } Post-modern error message cd /home/apicco/src/analysis/transcriptome/transmap/ g++ -g -I/home/apicco/install/boost_1_28_0 -o graph-test graph-test.C /home/apicco/install/boost_1_28_0/boost/iterator_adaptors.hpp: In method `typename IteratorAdaptor::reference boost::projection_iterator_policies<AdaptableUnaryFunction>::dereferen ce (const IteratorAdaptor &) const [with IteratorAdaptor = boost::iterator_adaptor<_Rb_tree_iterator<pair<const long int, graph_element>, pair<const long int, graph_element> &, pair<const long int, graph_element> *>, boost::projection_iterator_policies<select_component<0> >, float, float &, float *, boost::detail::default_argument, boost::detail::default_argument>, AdaptableUnaryFunction = select_component<0>]': /home/apicco/install/boost_1_28_0/boost/iterator_adaptors.hpp:867: instantiated from `boost::iterator_adaptor<Base, Policies, Value, Reference, Pointer, Category, Distance>::operator* () const [with Base = _Rb_tree_iterator<pair<const long int, graph_element>, pair<const long int, graph_element> &, pair<const long int, graph_element> *>, Policies = boost::projection_iterator_policies<select_component<0> >, Value = float, Reference = float &, Pointer = float *, Category = boost::detail::default_argument, Distance = boost::detail::default_argument]' /usr/include/g++-3/stl_algobase.h:129: instantiated from `__copy (_InputIter, _InputIter, _OutputIter, input_iterator_tag, _Distance *) [with _InputIter = boost::iterator_adaptor<_Rb_tree_iterator<pair<const long int, graph_element>, pair<const long int, graph_element> &, pair<const long int, graph_element> *>, boost::projection_iterator_policies<select_component<0> >, float, float &, float *, boost::detail::default_argument, boost::detail::default_argument>, _OutputIter = ostream_iterator<float>, _Distance = ptrdiff_t]' /usr/include/g++-3/stl_algobase.h:161: instantiated from `__copy_dispatch<_InputIter, _OutputIter, _BoolType>::copy (_InputIter, _InputIter, _OutputIter) [with _InputIter = boost::iterator_adaptor<_Rb_tree_iterator<pair<const long int, graph_element>, pair<const long int, graph_element> &, pair<const long int, graph_element> *>, boost::projection_iterator_policies<select_component<0> >, float, float &, float *, boost::detail::default_argument, boost::detail::default_argument>, _OutputIter = ostream_iterator<float>, _BoolType = __true_type]' /usr/include/g++-3/stl_algobase.h:188: instantiated from `copy (_InputIter, _InputIter, _OutputIter) [with _InputIter = boost::iterator_adaptor<_Rb_tree_iterator<pair<const long int, graph_element>, pair<const long int, graph_element> &, pair<const long int, graph_element> *>, boost::projection_iterator_policies<select_component<0> >, float, float &, float *, boost::detail::default_argument, boost::detail::default_argument>, _OutputIter = ostream_iterator<float>]' graph-test.C:30: instantiated from here /home/apicco/install/boost_1_28_0/boost/iterator_adaptors.hpp:1247: no match for call to `(const select_component<0>) (pair<const long int, graph_element> &)' graph.h:19: candidates are: const float &select_component<index>::operator() (const graph_element &) const [with int index = 0] graph.h:22: float &select_component<index>::operator () (graph_element &) const [with int index = 0] Compilation exited abnormally with code 1 at Tue Sep 24 11:14:11 Info: <http://www.boost.org> Wiki: <http://www.crystalclearsoftware.com/cgi-bin/boost_wiki/wiki.pl> Unsubscribe: <mailto:boost-users-unsubscribe@yahoogroups.com> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

1 0

projection iterator onto the k-th dimension
by Antonio Piccolboni 24 Sep '02

24 Sep '02

Reporting some progress wrt my previous post and adding a meaningful title. The code doesn't break on the iterator def but at the first usage. Error is (translated) can't convert return value of unary func obj to float &. Note that () returns float & Current code #ifndef GRAPH_H #define GRAPH_H #include <boost/config.hpp> #include <vector> #include <iostream> #include <iterator> #include <algorithm> #include <boost/iterator_adaptors.hpp> typedef vector<float> graph_element; template <int index> struct select_component { typedef pair < long, graph_element > argument_type; typedef float result_type; const float & operator()(const argument_type & r) const { return r.second[index]; } float & operator()(argument_type & r) const { return r.second[index]; } }; #endif Use case #include "graph.h" #include <map> #include<vector> int main(int, char*[]) { typedef map < long, graph_element > graph; graph aGraph; aGraph[0].push_back(0.00); aGraph[0].push_back(0.01); aGraph[0].push_back(0.02); aGraph[1].push_back(0.10); aGraph[1].push_back(0.11); aGraph[1].push_back(0.12); aGraph[2].push_back(0.20); aGraph[2].push_back(0.21); aGraph[2].push_back(0.22); aGraph[3].push_back(0.30); aGraph[3].push_back(0.31); aGraph[3].push_back(0.32); boost::projection_iterator_generator < select_component < 0 >, graph::iterator >::type graph_first(aGraph.begin()), graph_last(aGraph.end()); // copy(graph_first, graph_last, // ostream_iterator<float>(cout, "\n")); cout << *graph_first; cout << endl; } Postmodern error message: cd /home/apicco/src/analysis/transcriptome/transmap/ g++ -g -I/home/apicco/install/boost_1_28_0 -o graph-test graph-test.C /home/apicco/install/boost_1_28_0/boost/iterator_adaptors.hpp: In method `typename IteratorAdaptor::reference boost::projection_iterator_policies<AdaptableUnaryFunction>::dereferen ce (const IteratorAdaptor &) const [with IteratorAdaptor = boost::iterator_adaptor<_Rb_tree_iterator<pair<const long int, graph_element>, pair<const long int, graph_element> &, pair<const long int, graph_element> *>, boost::projection_iterator_policies<select_component<0> >, float, float &, float *, boost::detail::default_argument, boost::detail::default_argument>, AdaptableUnaryFunction = select_component<0>]': /home/apicco/install/boost_1_28_0/boost/iterator_adaptors.hpp:867: instantiated from `boost::iterator_adaptor<Base, Policies, Value, Reference, Pointer, Category, Distance>::operator* () const [with Base = _Rb_tree_iterator<pair<const long int, graph_element>, pair<const long int, graph_element> &, pair<const long int, graph_element> *>, Policies = boost::projection_iterator_policies<select_component<0> >, Value = float, Reference = float &, Pointer = float *, Category = boost::detail::default_argument, Distance = boost::detail::default_argument]' graph-test.C:31: instantiated from here /home/apicco/install/boost_1_28_0/boost/iterator_adaptors.hpp:1247: could not convert `(this + 1)->select_component<index>::operator()((&pair<long int,vector<float, allocator<float> > >((+(+(+iter)->boost::iterator_adaptor<Base, Policies, Value, Reference, Pointer, Category, Distance>::base())->_Rb_tree_iterator<_Value, _Ref, _Ptr>::operator* ()))))' to `float &' Compilation exited abnormally with code 1 at Tue Sep 24 14:52:21

1 0

grid graph for BGL
by toddgleason 24 Sep '02

24 Sep '02

Hi, I'm new to using the BGL, and have been working on a problem that uses a directed acyclic grid graph and subgraphs, and computes shortest paths. In my problem, the subgraphs are determined by paths from one end to the other. It is possible to determine in constant time whether a grid point or edge is within the graph, by looking at the paths bounding the subgraph. I started out using adjacency_list and filtered_graph to limit the graph, but this is not optimal because adjacency_list iterates over all vertices in the original graph to filter them. Ideally I'd like to use the indices from the master graph but be able to dynamically iterate over them according to the computations the code performs to limit the scope of the graphs. However, I'm not sure if anyone has done anything like this, and I'm a little frightened of trying to write my own graph class into the BGL structure. (I've never dealt with such heavily templated code before, and am even more confused than when looking at the STL!) Are there any pointers anyone can give me that would make it easier to construct such a class? Another option I'll throw out: Might it be simpler to hack one of the shortest paths algorithms to do a better job of restricting itself based on the dynamic subgraph filtering? I considered this (the code looks shorter and simpler), but it'd be cleaner to have a new graph class. Thanks to any who can help me. Also, I'm using VC++ 6 so all the problems with partial template specialization (which I don't even understand) apply to me. --Todd C. Gleason

3 3

None
by Antonio Piccolboni 24 Sep '02

24 Sep '02

Dear Boosters Suppose you have a matrix represented raw-wise with a vector< vector <float > > and you want to iterate over the coloumns. Easy with the projection adaptor. But life is never so easy. My matrix is represented raw wise by a map <vector <float> > and I need the same kind of iterator. There is no way I can get my code to compile. I think the problem is that vector iterators return values, map iterators retun pairs <key,value> (that is, references to the above). And this seems not only to doom my attempt at defining this n-th dim projection iterator, but even more so and fundamentally, it seem to preclude my ultimate goal of defining a projection for any container1 <containr2 < element_type > > where container2 two is random access. Any help would be appreciated and if I make it to the larger goal, I will return it to the community. Thanks Antonio Header #ifndef GRAPH_H #define GRAPH_H #include <boost/config.hpp> #include <vector> #include <iostream> #include <iterator> #include <algorithm> #include <boost/iterator_adaptors.hpp> //typedef pair<long, vector<float> > graph_element; typedef vector<float> graph_element; template <int index> struct select_component { typedef pair < long, graph_element > argument_type; typedef float result_type; const float & operator()(const graph_element & r) const { return r.second[index]; } float & operator()(graph_element & r) const { return r.second[index]; } }; #endif Would be test code #include "graph.h" #include <map> #include<vector> int main(int, char*[]) { typedef map < long, graph_element > graph; graph aGraph; aGraph[0].push_back(0.00); aGraph[0].push_back(0.01); aGraph[0].push_back(0.02); aGraph[1].push_back(0.10); aGraph[1].push_back(0.11); aGraph[1].push_back(0.12); aGraph[2].push_back(0.20); aGraph[2].push_back(0.21); aGraph[2].push_back(0.22); aGraph[3].push_back(0.30); aGraph[3].push_back(0.31); aGraph[3].push_back(0.32); boost::projection_iterator_generator < select_component < 0 >, graph::iterator >::type graph_first(aGraph.begin()), graph_last(aGraph.end()); copy(graph_first, graph_last, ostream_iterator<float>(cout, "\n")); cout << endl; } Post-modern error message cd /home/apicco/src/analysis/transcriptome/transmap/ g++ -g -I/home/apicco/install/boost_1_28_0 -o graph-test graph-test.C /home/apicco/install/boost_1_28_0/boost/iterator_adaptors.hpp: In method `typename IteratorAdaptor::reference boost::projection_iterator_policies<AdaptableUnaryFunction>::dereferen ce (const IteratorAdaptor &) const [with IteratorAdaptor = boost::iterator_adaptor<_Rb_tree_iterator<pair<const long int, graph_element>, pair<const long int, graph_element> &, pair<const long int, graph_element> *>, boost::projection_iterator_policies<select_component<0> >, float, float &, float *, boost::detail::default_argument, boost::detail::default_argument>, AdaptableUnaryFunction = select_component<0>]': /home/apicco/install/boost_1_28_0/boost/iterator_adaptors.hpp:867: instantiated from `boost::iterator_adaptor<Base, Policies, Value, Reference, Pointer, Category, Distance>::operator* () const [with Base = _Rb_tree_iterator<pair<const long int, graph_element>, pair<const long int, graph_element> &, pair<const long int, graph_element> *>, Policies = boost::projection_iterator_policies<select_component<0> >, Value = float, Reference = float &, Pointer = float *, Category = boost::detail::default_argument, Distance = boost::detail::default_argument]' /usr/include/g++-3/stl_algobase.h:129: instantiated from `__copy (_InputIter, _InputIter, _OutputIter, input_iterator_tag, _Distance *) [with _InputIter = boost::iterator_adaptor<_Rb_tree_iterator<pair<const long int, graph_element>, pair<const long int, graph_element> &, pair<const long int, graph_element> *>, boost::projection_iterator_policies<select_component<0> >, float, float &, float *, boost::detail::default_argument, boost::detail::default_argument>, _OutputIter = ostream_iterator<float>, _Distance = ptrdiff_t]' /usr/include/g++-3/stl_algobase.h:161: instantiated from `__copy_dispatch<_InputIter, _OutputIter, _BoolType>::copy (_InputIter, _InputIter, _OutputIter) [with _InputIter = boost::iterator_adaptor<_Rb_tree_iterator<pair<const long int, graph_element>, pair<const long int, graph_element> &, pair<const long int, graph_element> *>, boost::projection_iterator_policies<select_component<0> >, float, float &, float *, boost::detail::default_argument, boost::detail::default_argument>, _OutputIter = ostream_iterator<float>, _BoolType = __true_type]' /usr/include/g++-3/stl_algobase.h:188: instantiated from `copy (_InputIter, _InputIter, _OutputIter) [with _InputIter = boost::iterator_adaptor<_Rb_tree_iterator<pair<const long int, graph_element>, pair<const long int, graph_element> &, pair<const long int, graph_element> *>, boost::projection_iterator_policies<select_component<0> >, float, float &, float *, boost::detail::default_argument, boost::detail::default_argument>, _OutputIter = ostream_iterator<float>]' graph-test.C:30: instantiated from here /home/apicco/install/boost_1_28_0/boost/iterator_adaptors.hpp:1247: no match for call to `(const select_component<0>) (pair<const long int, graph_element> &)' graph.h:19: candidates are: const float &select_component<index>::operator() (const graph_element &) const [with int index = 0] graph.h:22: float &select_component<index>::operator () (graph_element &) const [with int index = 0] Compilation exited abnormally with code 1 at Tue Sep 24 11:14:11

1 0

Borland C++ Builder 5.5 & scoped_ptr
by Brian Neal 24 Sep '02

24 Sep '02

I'm new here; I searched the Yahoo archive and didn't see anything about this so I apologize if this has been discussed before. Today I learned (the hard and painful way) that there is a bug in Borland C++ Builder 5.5 such that when compiling with debug support, the compiler thinks it needs to generate destructors in the wrong translation units. We noticed this because we were using the "handle-body" idiom with auto_ptr's (taking all the precautions from Herb Sutter's Exceptional C++ books) and our destructors were not getting called. We switched over to boost::shared_ptr's and the handy-dandy compile time check in the destructor for incomplete types was firing...but in the code that uses and declares objects of the classes that have the handle-body idiom...a pretty serious bug in my view. We then tried to compile the example code from boost for scoped_ptr and it would not compile for the same reason. A quick search of the newsgroups reveals that others have found this bug, and C++ Builder is the only major compiler that has this flaw. I've heard that it has been fixed in version 6. Can others verify this? So I am posting this for 2 reasons: 1) to let others know about it (in case you don't know already), and 2) I noticed that in the Boost compiler status web-page it says that smart_ptr passed all its tests with C++ Builder 5.5.1. I didn't look at the tests, but was this handle-body type usage tested to make sure the destructor was called? Or perhaps it was but without debug support turned on? Thanks, Brian Neal

6 12