- Boost-users - lists.boost.org

[locale] Boost.Locale cannot be used with std::regex
by Josue Andrade Gomes 24 May '21

24 May '21

It seems that Boost.Locale cannot be used with std::regex. See the code below: #include <regex> #include <boost/locale.hpp> int main() { try { boost::locale::generator gen; std::locale de_DE(gen("de_DE.UTF-8")); std::wstring in(L"Grün GRÜN grün"); std::wregex rx; rx.imbue(de_DE); rx.assign(L"grün", std::regex::icase); std::wcout << std::regex_replace(in, rx, L"green") << L"\n"; } catch (std::exception &e) { std::cout << "Exception: " << e.what() << "\n"; } } Outputs: green GRÜN green However this: #include <regex> #include <locale> int main() { try { std::locale de_DE("de_DE.UTF-8"); std::wstring in(L"Grün GRÜN grün"); std::wregex rx; rx.imbue(de_DE); rx.assign(L"grün", std::regex::icase); std::wcout << std::regex_replace(in, rx, L"green") << L"\n"; } catch (std::exception &e) { std::cout << "Exception: " << e.what() << "\n"; } } Correctly outputs: green green green Tested on Ubuntu 20.04.2. g++ 10.2, Boost.Locale built with ICU support using vcpkg (thus static link).

1 0

Application leaves process behind
by Isabelle Poueriet 20 May '21

20 May '21

My application is not cleaning up properly - it leaves the process behind in task manager after exiting.I read about this below, but I'm setting all sinks from a configuration file. Can the shutdown documented in link below be done from the config file? If so, what are the options? I am using multi-threaded loggers. Thanks in advance. c++ - How to stop all asynchronous sinks when using Boost.Log - Stack Overflow Snippet of code referenced in link above: // Remove the sink from the core, so that no records are passed to it core->remove_sink(sink); // Break the feeding loop sink->stop(); // Flush all log records that may have left buffered sink->flush(); sink.reset(); Snippet of my config file: # Logging core settings section. May be omitted if no parameters specified within it.[Core]# <DisableLogging> true=disable all logging; false=enable all logging Q. do we care to disable specific channels?DisableLogging=false # Sink settings sections#GTSMAIN logs everything to a text file[Sinks.GTSMAIN]Destination="TextFile" #<Asynchronous> if true, a thread is dedicated to writing to log, otherwise blocks main thread to write.Asynchronous="true" # Enables automatic stream flush after each log record.AutoFlush="true" # Formatter string. Optional, by default only log record message text is written.Format="[%TimeStamp%][%ThreadID%][%Severity%][%Channel%] %Message%" #Target specifies where to save files when rotation occurrsTarget="C:/Temp/GtsLogs"FileName="gtsMainLog_%3N.log"#RotationSize in bytesRotationSize="1048576"#MaxSize - oldest file in the target directory will be deleted when Maxsize(in bytes) is reachedMaxSize=100485760OpenMode="append"#Apply no filter for the main log# Sink-specific filter. Optional, by default no filter is applied.#============================================================================================================[Sinks.ADM]Destination="TextFile"##<Asynchronous> if true, a thread is dedicated to writing to log, otherwise blocks main thread to write.Asynchronous="true"### Enables automatic stream flush after each log record.AutoFlush="true"### Formatter string. Optional, by default only log record message text is written.Format="[%TimeStamp%][%ThreadID%][%Severity%][%Channel%] %Message%"#Target="C:/Temp/GtsLogs"FileName="gtsAdm_%3N.log"##RotationSize in bytesRotationSize="1048576"##MaxSize - oldest file in the target directory will be deleted when Maxsize(in bytes) is reachedMaxSize=100485760##Apply no filter for the main log## Sink-specific filter - anything in AGR channel. Optional, by default no filter is applied.Filter="%Channel% matches \"ADM\""##============================================================================================================[Sinks.AGR]Destination="TextFile"###<Asynchronous> if true, a thread is dedicated to writing to log, otherwise blocks main thread to write.Asynchronous="true"### Enables automatic stream flush after each log record.AutoFlush="true"### Formatter string. Optional, by default only log record message text is written.Format="[%TimeStamp%][%ThreadID%][%Severity%][%Channel%] %Message%"#Target="C:/Temp/GtsLogs"FileName="gtsAgr_%3N.log"##RotationSize in bytesRotationSize="1048576"##MaxSize - oldest file in the target directory will be deleted when Maxsize(in bytes) is reachedMaxSize=100485760## Sink-specific filter - anything in AGR channel. Optional, by default no filter is applied.Filter="%Channel% matches \"AGR\""

1 0

How to set open_mode "append" in configuration file
by Isabelle Poueriet 20 May '21

20 May '21

Howdy. I have the configuration file below and I load it from the code as depicted below.The log files are being created, but they get overwritten each time I run the application, instead of being appended each time I run. code to load settings from config file///////////////////////////////////////////////////////////////////////////////// Name: ConfigureSinksFromIniFile()// Purpose: Load filter settings from configuration file//////////////////////////////////////////////////////////////////////////////* static */ void GtsLog::ConfigureSinksFromIniFile(){ try { std::ifstream cfgFile(".\\gtsLogConfig.INI"); try { if (cfgFile.is_open()) { try { // Add some attributes logging::add_common_attributes(); // Read the settings and initialize logging library logging::init_from_stream(cfgFile); return; } catch (std::exception& e) { std::cout << "Could not load configuration file. Check for boost config syntax" << e.what() << std::endl; return; } } else { std::cout << "Could not open log configuration file" << std::endl; return; //should we exit instead? } } catch (std::exception& e) { std::cout << "Could not open log configuration file" << e.what() << std::endl; return; //should we exit instead? } } catch (std::exception& e) { std::cout << "FAILURE: could not associate cfgFile to .\\gtsLogCfg.ini " << e.what() << std::endl; return; //should we exit instead? }} Configuration File gtsConfig.INI===========================[Core]# <DisableLogging> true=disable all logging; false=enable all logging Q. do we care to disable specific channels?DisableLogging=false # Sink settings sections#GTSMAIN logs everything to a text file[Sinks.GTSMAIN]Destination="TextFile" #<Asynchronous> if true, a thread is dedicated to writing to log, otherwise blocks main thread to write.Asynchronous="true" # Enables automatic stream flush after each log record.AutoFlush="true" # Formatter string. Optional, by default only log record message text is written.Format="[%TimeStamp%][%ThreadID%][%Severity%][%Channel%] %Message%" #Target specifies where to save files when rotation occurrsTarget="C:/Temp/GtsLogs"FileName="gtsMainLog_%3N.log"#RotationSize in bytesRotationSize="1048576"#MaxSize - oldest file in the target directory will be deleted when Maxsize(in bytes) is reachedMaxSize=100485760OpenMode="append"#Apply no filter for the main log# Sink-specific filter. Optional, by default no filter is applied.#============================================================================================================[Sinks.ADM]Destination="TextFile"##<Asynchronous> if true, a thread is dedicated to writing to log, otherwise blocks main thread to write.Asynchronous="true"### Enables automatic stream flush after each log record.AutoFlush="true"### Formatter string. Optional, by default only log record message text is written.Format="[%TimeStamp%][%ThreadID%][%Severity%][%Channel%] %Message%"#Target="C:/Temp/GtsLogs"FileName="gtsAdm_%3N.log"##RotationSize in bytesRotationSize="1048576"##MaxSize - oldest file in the target directory will be deleted when Maxsize(in bytes) is reachedMaxSize=100485760##Apply no filter for the main log## Sink-specific filter - anything in AGR channel. Optional, by default no filter is applied.Filter="%Channel% matches \"ADM\""##============================================================================================================[Sinks.AGR]Destination="TextFile"###<Asynchronous> if true, a thread is dedicated to writing to log, otherwise blocks main thread to write.Asynchronous="true"### Enables automatic stream flush after each log record.AutoFlush="true"### Formatter string. Optional, by default only log record message text is written.Format="[%TimeStamp%][%ThreadID%][%Severity%][%Channel%] %Message%"#Target="C:/Temp/GtsLogs"FileName="gtsAgr_%3N.log"##RotationSize in bytesRotationSize="1048576"##MaxSize - oldest file in the target directory will be deleted when Maxsize(in bytes) is reachedMaxSize=100485760## Sink-specific filter - anything in AGR channel. Optional, by default no filter is applied.Filter="%Channel% matches \"AGR\""

2 1

Spirit X3 comment parser
by Olaf Peter 17 May '21

17 May '21

Hallo Users, this time a question about retaining the comments in the recursive AST. I've never seen those question before. I have a grammar that can have a comment at any point while maintaining that same grammar. I am interested in the comments to be able to parse the possibly contained pragma etc. statement later (so parsed as raw). ... auto const comment_def = x3::lit("//") >> raw[*(char_ - x3::eol) >> x3::eol]; ... The AST is ready, an AST node for the comment is also there. How do I change the rule now? auto const start_def = x3::skip(x3::space)[ comment | toplevel_rule ]; with the actual parse function: ... x3::parse(iter, end, toplevel_parser >> x3::eoi, toplevel); .... originally the latter looked like this: .... x3::phrase_parse(iter, end, toplevel_parser >> x3::eoi, parser::skipper, toplevel); ... The above start_def unfortunately also changes the attribute for it, ast::toplevel_node now becomes a variant<ast::comment_node,ast::toplevel_node>. I'm also not sure how this rule affects the dependent rules, i.e. recursive and low level in terms of correctness and performance. For the AST visitor this just means another overload. Another point is the test suite. Currently I test the low level sub rules with a separate instance, where the test input can also contain comments for test case documentation purpose. With x3::phrase_parse() this was not a problem. With the new approach, for each rule to be tested, I also have to use a variant <comment,attribute> for the attribute, which is very inconvenient.... So the question, is this really the right way? Are there alternatives? Thanks in advance

1 0

compiler error using boost::posix_time::time_facet
by Dan Bloomquist 08 May '21

08 May '21

Hi, I'm getting a strange error in that I've done this before without problems. But I've started a new MFC project and I'm getting this error. The same exact header in other projects compiles fine. I'm using all the same settings. with: auto* facet= new boost::posix_time::time_facet( "%d-%b-%Y %H:%M:%S" ); and if I comment that line the same error comes in further down where I: os << "[" << boost::posix_time::second_clock::local_time() << "] "; I just can not figure out what is different in this project that is causing this. using the latest MS compiler with c++17 Thanks, Dan. I'm getting: F:\cpp\boost_1_74_0\boost\algorithm\string\replace.hpp(654,37): error C2672: 'boost::algorithm::first_finder': no matching overloaded function found 1>F:\cpp\boost_1_74_0\boost\date_time\time_facet.hpp(312): message : see reference to function template instantiation 'void boost::algorithm::replace_all<std::basic_string<char,std::char_traits<char>,std::allocator<char>>,const char*,std::basic_string<char,std::char_traits<char>,std::allocator<char>>>(SequenceT &,const Range1T &,const Range2T &)' being compiled 1> with 1> [ 1> SequenceT=std::basic_string<char,std::char_traits<char>,std::allocator<char>>, 1> Range1T=const char *, 1> Range2T=std::basic_string<char,std::char_traits<char>,std::allocator<char>> 1> ] 1>F:\cpp\boost_1_74_0\boost\date_time\time_facet.hpp(285): message : while compiling class template member function 'OutItrT boost::date_time::time_facet<boost::posix_time::ptime,char,OutItrT>::put(OutItrT,std::ios_base &,char,const time_type &) const' 1> with 1> [ 1> OutItrT=std::ostreambuf_iterator<char,std::char_traits<char>>, 1> time_type=boost::posix_time::ptime 1> ] 1>F:\cpp\boost_1_74_0\boost\date_time\posix_time\posix_time_io.hpp(52): message : see reference to function template instantiation 'OutItrT boost::date_time::time_facet<boost::posix_time::ptime,char,OutItrT>::put(OutItrT,std::ios_base &,char,const time_type &) const' being compiled 1> with 1> [ 1> OutItrT=std::ostreambuf_iterator<char,std::char_traits<char>>, 1> time_type=boost::posix_time::ptime 1> ] 1>f:\cpp\include\logging.h(20): message : see reference to class template instantiation 'boost::date_time::time_facet<boost::posix_time::ptime,char,std::ostreambuf_iterator<char,std::char_traits<char>>>' being compiled 1>F:\cpp\boost_1_74_0\boost\algorithm\string\replace.hpp(654,1): error C2893: Failed to specialize function template 'boost::algorithm::detail::first_finderF<range_const_iterator<T,void>::type,boost::algorithm::is_equal> boost::algorithm::first_finder(const RangeT &)' 1>F:\cpp\boost_1_74_0\boost\algorithm\string\finder.hpp(52): message : see declaration of 'boost::algorithm::first_finder' 1>F:\cpp\boost_1_74_0\boost\algorithm\string\replace.hpp(654,1): message : With the following template arguments: 1>F:\cpp\boost_1_74_0\boost\algorithm\string\replace.hpp(654,1): message : 'RangeT=Range1T' 1>F:\cpp\boost_1_74_0\boost\algorithm\string\replace.hpp(652,33): error C2672: 'boost::algorithm::find_format_all': no matching overloaded function found 1>F:\cpp\boost_1_74_0\boost\algorithm\string\replace.hpp(655,1): error C2780: 'void boost::algorithm::find_format_all(SequenceT &,FinderT,FormatterT)': expects 3 arguments - 2 provided 1>F:\cpp\boost_1_74_0\boost\algorithm\string\find_format.hpp(250): message : see declaration of 'boost::algorithm::find_format_all' 1>F:\cpp\boost_1_74_0\boost\algorithm\string\erase.hpp(595,37): error C2672: 'boost::algorithm::first_finder': no matching overloaded function found 1>F:\cpp\boost_1_74_0\boost\date_time\time_facet.hpp(321): message : see reference to function template instantiation 'void boost::algorithm::erase_all<std::basic_string<char,std::char_traits<char>,std::allocator<char>>,const char*>(SequenceT &,const RangeT &)' being compiled 1> with 1> [ 1> SequenceT=std::basic_string<char,std::char_traits<char>,std::allocator<char>>, 1> RangeT=const char * 1> ] 1>F:\cpp\boost_1_74_0\boost\algorithm\string\erase.hpp(595,1): error C2893: Failed to specialize function template 'boost::algorithm::detail::first_finderF<range_const_iterator<T,void>::type,boost::algorithm::is_equal> boost::algorithm::first_finder(const RangeT &)' 1>F:\cpp\boost_1_74_0\boost\algorithm\string\finder.hpp(52): message : see declaration of 'boost::algorithm::first_finder' 1>F:\cpp\boost_1_74_0\boost\algorithm\string\erase.hpp(595,1): message : With the following template arguments: 1>F:\cpp\boost_1_74_0\boost\algorithm\string\erase.hpp(595,1): message : 'RangeT=RangeT' 1>F:\cpp\boost_1_74_0\boost\algorithm\string\erase.hpp(593,33): error C2672: 'boost::algorithm::find_format_all': no matching overloaded function found 1>F:\cpp\boost_1_74_0\boost\algorithm\string\erase.hpp(596,1): error C2780: 'void boost::algorithm::find_format_all(SequenceT &,FinderT,FormatterT)': expects 3 arguments - 2 provided 1>F:\cpp\boost_1_74_0\boost\algorithm\string\find_format.hpp(250): message : see declaration of 'boost::algorithm::find_format_all'

1 0

[Math] Standalone beta release
by John Maddock 03 May '21

03 May '21

Just a heads up that Boost.Math now has a (beta) standalone release at https://github.com/boostorg/math/releases/tag/v1.76-standalone-beta We would very much appreciate any interested parties giving it a whirl and reporting back. With many thanks to Matt Borland and Nick Thompson for making this possible! Best, John Maddock. -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

1 0

Final Notice: BinTray is shutting down 1-May (that's SATURDAY)
by Marshall Clow 29 Apr '21

29 Apr '21

Bintray is “sunsetting” on the 1st of May. At that time, you will be unable to download boost releases from there. Before that time, their service will be occasionally interrupted. The web site has been updated, all the download links now refer to https://boostorg.jfrog.io/artifactory/main/release/ <https://boostorg.jfrog.io/artifactory/main/release/> Example: Instead of downloading from: https://dl.bintray.com/boostorg/release/1.76.0/source/boost_1_76_0.tar.gz <https://dl.bintray.com/boostorg/release/1.76.0/source/boost_1_76_0.tar.gz> You should download from: https://boostorg.jfrog.io/artifactory/main/release/1.76.0/source/boost_1_76… <https://boostorg.jfrog.io/artifactory/main/release/1.76.0/source/boost_1_76…> This applies to all releases from 1.63.0 onward (The pre-1.63 releases are still hosted at SourceForge) — Marshall

1 0

[beast] help with http::dynamic_body and http::buffer_body
by Klebsch, Mario 26 Apr '21

26 Apr '21

Hello, After using boost::asio for several years I thought, I might give beast a try. I need to write a http server processing a POST request with an upload of a big file. So I thought, I could start with libs/beast/example/http/server/async. I soon found the function handle_request() and that I have to add something like if (req.method() == http::verb::post && req.target()=="/xxx" ) to catch the http POST transaction. But since I have to process the upload of a large file, I thought that using a http::string_body might not be the best choice. I found several other body types in the documentation. I thought buffer_body ought to be fine, since the documentation says: ‘This allows for serialization of body data coming from external sources, and incremental parsing of message body content using a fixed size buffer.’. incremental processing of the input stream is what I need. But now, I have no clue, how to change the example to use a buffer_body. I changed http::request<http::string_body> req_ to http::request<http::buffer_body> req_. But now I must process the request message in chunks. How do I get my callback invoked for each chunk? Without additional changes, I get a read error: need buffer. But the documentation on buffer_body does not help me. Buffer_body does not seem to have any methods, that I can call. It does have a member type reader, that is documented as implementation-defined. So there is nothing I can do with this reader. ☹ There is a member type value_type, that does have data, size and more mebers, but I have no idea, how I could et hold of a variable of this type containing a part of my message body. The error message might indicate, that I need to provide a fixed size buffer to the buffer_body, but I have no idea, how to do this. I tried to add the following code to do_read(): req_.body().data = my_buffer; req_.body().size = sizeof(my_buffer); It compiles, so req_body() seems to be the way to get hold on a http::buffer_body::value_type, but simply initializing the two variables does not seem to be sufficient. I also tried to set req_.body().more to false or to true, but it didn’t change anything. I then thought, I might try a dynamic_body. This would store the entire upload in memory, but perhaps I get more familiar with the beat framework, when I try to use this body. And in deed, I managed to write some code, that shows all request headers and the request body on stdout. To get the body, I had to copy the buffer contents into a std::string: std::string body{ boost::asio::buffers_begin(req.body().data()), boost::asio::buffers_end(req.body().data()) }; Since large files have to be handled by my code, this additional copy of the data is to be avoided. So I tried to iterate the body using the iterators: const auto begin = boost::asio::buffers_begin(req.body().data()); const auto end = boost::asio::buffers_end(req.body().data()); for (auto it = begin; it != end; it++) putchar(*it); While it runs fine on the windows box, the loop crashes on linux in the 512th iteration in it++. Program received signal SIGSEGV, Segmentation fault. 0x0000555555592432 in boost::intrusive::list_node_traits<void*>::get_previous (n=@0x7fffffffc118: 0x1ff) at ../boost/boost/intrusive/detail/list_node.hpp:54 54 { return n->prev_; } (gdb) print n $1 = (const boost::intrusive::list_node_traits<void*>::node_ptr &) @0x7fffffffc118: 0x1ff (gdb) Here is the call stack: #0 0x0000555555592432 in boost::intrusive::list_node_traits<void*>::get_previous (n=@0x7fffffffc118: 0x1ff) at ../boost/boost/intrusive/detail/list_node.hpp:54 #1 boost::intrusive::list_iterator<boost::intrusive::bhtraits<boost::beast::basic_multi_buffer<std::allocator<char> >::element, boost::intrusive::list_node_traits<void*>, (boost::intrusive::link_mode_type)0, boost::intrusive::dft_tag, 1u>, true>::operator-- (this=0x7fffffffc118) at ../boost/boost/intrusive/detail/list_iterator.hpp:107 #2 std::__advance<boost::intrusive::list_iterator<boost::intrusive::bhtraits<boost::beast::basic_multi_buffer<std::allocator<char> >::element, boost::intrusive::list_node_traits<void*>, (boost::intrusive::link_mode_type)0, boost::intrusive::dft_tag, 1u>, true>, long> (__i=..., __n=0) at /usr/lib/gcc/x86_64-pc-linux-gnu/10.2.0/include/g++-v10/bits/stl_iterator_base_funcs.h:169 #3 0x000055555558daf0 in std::advance<boost::intrusive::list_iterator<boost::intrusive::bhtraits<boost::beast::basic_multi_buffer<std::allocator<char> >::element, boost::intrusive::list_node_traits<void*>, (boost::intrusive::link_mode_type)0, boost::intrusive::dft_tag, 1u>, true>, long> (__i=..., __n=-1) at /usr/lib/gcc/x86_64-pc-linux-gnu/10.2.0/include/g++-v10/bits/stl_iterator_base_funcs.h:206 #4 0x0000555555589254 in std::prev<boost::intrusive::list_iterator<boost::intrusive::bhtraits<boost::beast::basic_multi_buffer<std::allocator<char> >::element, boost::intrusive::list_node_traits<void*>, (boost::intrusive::link_mode_type)0, boost::intrusive::dft_tag, 1u>, true> > (__x=..., __n=1) at /usr/lib/gcc/x86_64-pc-linux-gnu/10.2.0/include/g++-v10/bits/stl_iterator_base_funcs.h:230 #5 0x0000555555589608 in boost::beast::basic_multi_buffer<std::allocator<char> >::subrange<true>::const_iterator::operator* (this=0x7fffffffc4f8) at ../boost/boost/beast/core/impl/multi_buffer.hpp:384 #6 0x0000555555589b4b in boost::asio::buffers_iterator<boost::beast::basic_multi_buffer<std::allocator<char> >::subrange<true>, char>::increment (this=0x7fffffffc4d0) at ../boost/boost/asio/buffers_iterator.hpp:370 #7 0x0000555555584894 in boost::asio::buffers_iterator<boost::beast::basic_multi_buffer<std::allocator<char> >::subrange<true>, char>::operator++ (this=0x7fffffffc4d0) at ../boost/boost/asio/buffers_iterator.hpp:229 #8 0x000055555557e7c0 in boost::asio::buffers_iterator<boost::beast::basic_multi_buffer<std::allocator<char> >::subrange<true>, char>::operator++ (this=0x7fffffffc4d0) at ../boost/boost/asio/buffers_iterator.hpp:237 #9 0x0000555555579ba8 in handle_request<boost::beast::http::basic_dynamic_body<boost::beast::basic_multi_buffer<std::allocator<char> > >, std::allocator<char>, session::send_lambda&> (doc_root=..., req=..., send=...) at t.cpp:164 I hope anybody can give my a hint on how to use this beast. Right now it feels that it might be easier to write the http server using plain boost::asio. Klebsch Mario Funktion | R&D Tel: +49 (0) 531 38 701 718 Raum: Braunschweig, E20 Diese E-Mail und die an sie angehängten Dateien sind ausschließlich für Personen oder Institutionen bestimmt, deren Namen oben aufgeführt sind. Sie können Informationen enthalten, die durch das Berufsgeheimnis geschützt sind und deren Weitergabe strengstens untersagt ist. Jede elektronische Nachricht kann geändert werden. ACTIA lehnt jede Verantwortung für diese Nachricht ab. Der Inhalt dieser Nachricht stellt keine Verpflichtung seitens unseres Unternehmens dar. Wenn Sie kein Empfänger sind, weisen wir Sie darauf hin, dass das Lesen, Vervielfältigen oder Verteilen strengstens untersagt ist. Wir bitten Sie daher, uns umgehend über diesen Brief zu informieren und diese Nachricht sowie eventuell beigefügte Unterlagen aus Ihrem Postfach zu löschen. Danke. This e-mail and the files attached to it are intended exclusively for persons or institutions whose names are listed above. They may contain information that is protected by professional secrecy and the disclosure of which is strictly prohibited. Any electronic message can be modified. ACTIA declines all responsibility for this message. The content of this message does not represent a commitment on the part of our company. If you are not a recipient, we would like to point out that reading, copying or distribution is strictly prohibited. We therefore ask you to inform us immediately about this letter and to delete this message and any accompanying documents from your mailbox. Thank you.

2 2

Boost + Emscripten: .bc files?
by Rainer Deyke 22 Apr '21

22 Apr '21

I managed to successfully compile a subset of Boost for Emscripten using the emscripten toolset. However, this for some reason produces .bc files for libraries instead of .a files, which causes link errors I try to link my project. How can I get Boost to generate .a files? (Emscripten uses .a files for libraries: https://emscripten.org/docs/compiling/Building-Projects.html#using-libraries) -- Rainer Deyke (rainerd(a)eldwood.com)

1 0

Cannot build 1.76.0 for Windows (wrong path to compiler)
by Andreas Tscharner 22 Apr '21

22 Apr '21

Hello World, I try, according to the "Get started guide" >bootstrap.bat in the main boost directory. I get an error, because "C:\Program Files(x86)" ... contains a space and is not double quoted. So I replace all set "B2_CXX=%CXX% ..." with set "B2_CXX="%CXX%" ..." in tools\build\src\engine\config_toolset.bat After that I have the following problem: D:\Projects\development\QUARTIS-related\boost>.\bootstrap.bat Building Boost.Build engine LOCALAPPDATA=C:\Users\ATs\AppData\Local Found with vswhere C:\Program Files (x86)\Microsoft Visual Studio\2019\Enterprise Found with vswhere C:\Program Files (x86)\Microsoft Visual Studio\2019\Enterprise Call_If_Exists "C:\Program Files (x86)\Microsoft Visual Studio\2019\Enterprise\Common7\Tools\..\..\VC\Auxiliary\Build\vcvarsall.bat" AMD64 ********************************************************************** ** Visual Studio 2019 Developer Command Prompt v16.9.4 ** Copyright (c) 2021 Microsoft Corporation ********************************************************************** [vcvarsall.bat] Environment initialized for: 'x64' ### ### Using 'vc142' toolset. ### D:\Projects\development\QUARTIS-related\boost\tools\build\src\engine>"C:/Program Files (x86)/Microsoft Visual Studio/2019/Enterprise/VC/Tools/MSVC/14.27.29110/bin/Hostx64/x64/cl.exe" /nologo /MP /MT /TP /Feb2 /wd4996 /O2 /GL /EHsc -DNDEBUG builtins.cpp class.cpp command.cpp compile.cpp constants.cpp cwd.cpp debug.cpp debugger.cpp execcmd.cpp execnt.cpp filent.cpp filesys.cpp frames.cpp function.cpp glob.cpp hash.cpp hcache.cpp hdrmacro.cpp headers.cpp jam.cpp jamgram.cpp lists.cpp make.cpp make1.cpp md5.cpp mem.cpp modules.cpp native.cpp object.cpp option.cpp output.cpp parse.cpp pathnt.cpp pathsys.cpp regexp.cpp rules.cpp scan.cpp search.cpp jam_strings.cpp startup.cpp subst.cpp sysinfo.cpp timestamp.cpp variable.cpp w32_getreg.cpp modules/order.cpp modules/path.cpp modules/property-set.cpp modules/regex.cpp modules/sequence.cpp modules/set.cpp /link kernel32.lib advapi32.lib user32.lib Das System kann den angegebenen Pfad nicht finden. It tries to start "C:/Program Files (x86)/Microsoft Visual Studio/2019/Enterprise/VC/Tools/MSVC/14.27.29110/bin/Hostx64/x64/cl.exe". Unfortunately at my system, I don't have this path. I have C:\Program Files (x86)\Microsoft Visual Studio\2019\Enterprise\VC\Tools\MSVC\14.28.29910... Please note the different number after "MSVC" What is the problem? How can I fix this? TIA and best regards Andreas -- ("`-''-/").___..--''"`-._ `o_ o ) `-. ( ).`-.__.`) (_Y_.)' ._ ) `._ `. ``-..-' _..`--'_..-_/ /--'_.' .' (il).-'' (li).' ((!.-' Andreas Tscharner andy(a)stupidmail.ch ICQ-No. 14356454

1 0