- Boost-users - lists.boost.org

[statechart] [spirit] OSI delimited message framing
by Michael Powell 19 Jun '13

19 Jun '13

Hello, I need to design a delimited message framing for TCP/IP sockets, probably using Asio to facilitate transport. Then build an OSI layer 7 application vernier to handle framing. I've dabbled a bit with Spirit and cooked up a couple of "simple" micro grammars throughout the code base. In a sense, I could see a delimited message framing strategy being a grammar of sorts, but this seems somewhat complex for a grammar to handle when you consider the overhead of verifying pass/fail (message or not a message), plus extracting the message within the delimiters. Or, more likely approach the problem with statechart in mind. I've dealt with framed messages in the past more like this. One state is the escape byte, which can be followed by SOM, EOM, or another true-escape-byte (intended message byte). Plus other fields like message type, sub-type, how to handle payload, arguments, and so forth. Anyone else dealt with things like this before? With Spirit? With Statechart? Regards, Michael Powell

5 5

Re: [Boost-users] Boost-users Digest, Vol 3479, Issue 1
by Damien Kick 19 Jun '13

19 Jun '13

Date: Mon, 17 Jun 2013 23:03:16 +0000 (UTC) From: legalize+jeeves(a)mail.xmission.com<mailto:legalize+jeeves@mail.xmission.com> (Richard) To: boost-users(a)lists.boost.org<mailto:boost-users@lists.boost.org> Subject: Re: [Boost-users] [Test]: Problem with simple Boost.Test Message-ID: <kpo4jk$2ih$2(a)ger.gmane.org<mailto:kpo4jk$2ih$2@ger.gmane.org>> [Please do not mail me a copy of your followup] boost-users(a)lists.boost.org<mailto:boost-users@lists.boost.org> spake the secret code <7364AB234369D348AE1CEBC1A86132DBAD32EA(a)SVLITMX02.shoretel.com<http://SVLITMX02.shoretel.com>> thusly: $ ${CXX} -c --std=c++0x -g -I${TARGET}/include cma.cpp -o cma.o $ ${CXX} --std=c++0x -g cma.o ${TARGET}/lib/libboost_test_exec_monitor.a \ ${TARGET}/lib/libboost_unit_test_framework.dylib -o cma Why are you linking against boost_test_exec_monitor? I've never needed to do that. boost_unit_test_framework should be enough. Interesting. Because I'm finding the following: $ ${CXX} -c --std=c++0x -g -I${TARGET}/include cma.cpp -o cma.o $ ${CXX} --std=c++0x -g cma.o ${TARGET}/lib/libboost_unit_test_framework.dylib -o cma Undefined symbols for architecture x86_64: "_main", referenced from: implicit entry/start for main executable ld: symbol(s) not found for architecture x86_64 collect2: error: ld returned 1 exit status $ But that is also what I'm finding with the system GCC and the Fink install of Boost 1.46, and so that behavior isn't unique my attempt to build/use a Boost with GCC 4.8.0 using --std=c++0x. $ g++ -c -g -I/sw/include cma.cpp -o cma.o $ g++ -g -L/sw/lib cma.o -lboost_unit_test_framework-mt Undefined symbols for architecture x86_64: "_main", referenced from: start in crt1.10.6.o ld: symbol(s) not found for architecture x86_64 collect2: ld returned 1 exit status $ g++ --version i686-apple-darwin11-llvm-g++-4.2 (GCC) 4.2.1 (Based on Apple Inc. build 5658) (LLVM build 2336.11.00) Copyright (C) 2007 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. $ fink list --tab boost1.46 Information about 7237 packages read in 1 seconds. i boost1.46.1.cmake 1.46.1-2 Boost C++ Libraries i boost1.46.1.cmake-shlibs 1.46.1-2 Boost C++ Libraries $ ________________________________ This e-mail and any attachments are confidential. If it is not intended for you, please notify the sender, and please erase and ignore the contents.

1 0

[asio] Serial and TCP I/O
by Michael Powell 19 Jun '13

19 Jun '13

Hello, I have an application that I'd like to leverage some common code if at all possible (and/or necessary), using concepts of client/server, reader/writer, and so on. Probably also TCP/IP and/or Serial, although I gather Asio has a serial class ready to go out of the box? Serial is pretty much a "no brainer", can be a server, but to talk to devices in our use case, always the client, can be either reader or writer or both. The key question here is, do we need a separate io_service for serial as well as for TCP? Regards, Michael Powell

2 1

What is the status of the BGL-Python Bindings project
by lizy10b 19 Jun '13

19 Jun '13

Hi there, I would like to know what is the status of the BGL-Python Bindings project? The Boost 1.53 document says that "The Python bindings for the BGL are now part of a separate project" and links to http://www.osl.iu.edu/~dgregor/bgl-python/ On that page I find that the latest version is 0.9 which was released in 2005. So it means the BGL-Python Binding project is not on going? Is the BGL-Python Bindings 0.9 compatible to Boost 1.53 ? Or any other ways to use Boost graph functionalities in python? Thanks Zhiyu Li 2013-06-19 lizy10b

3 7

[build] Problem building using Intel C++ compiler
by Jason 19 Jun '13

19 Jun '13

I'm trying to build v1.53 using the Intel C++ compiler and am having some problems. I'm issuing the following commands: ./bootstrap.sh --with-toolset=intel-linux ./b2 toolset=intel-linux Upon executing the second command, I get the following error: error: intel-linux initialization: parameter 'version' inconsistent error: no value was specified in earlier initialization error: an explicit value is specified now This appears to be similar to a mailing list thread regarding v1.39, archived here: https://groups.google.com/forum/#!topic/boost-list/gu9wf3cr15Y It appears that there is a workaround listed there (and a corresponding Trac ticket #3165) that involves hand-manipulation of bjam configuration files, but it seems like this is something that should work out of the box if Intel C++ is a supported toolset. Is there any chance that this would be fixed in the future? Jason -- View this message in context: http://boost.2283326.n4.nabble.com/build-Problem-building-using-Intel-C-com… Sent from the Boost - Users mailing list archive at Nabble.com.

1 0

[BGL] null_vertex()
by Andreas Fabri 18 Jun '13

18 Jun '13

Hello, I am wondering what the function boost::graph_traits<G>::null_vertex() http://www.boost.org/doc/libs/1_53_0/libs/graph/doc/Graph.html is for, and why there is no equivalent function null_edge() best regards, andreas -- Andreas Fabri, PhD Chief Officer, GeometryFactory Editor, The CGAL Project phone: +33.492.954.912 skype: andreas.fabri

2 2

[Test]: Problem with simple Boost.Test
by Damien Kick 17 Jun '13

17 Jun '13

I'm trying to get what I think should be a simple example of Boost.Test (Boost 1.53) to work but I'm getting a segmentation fault, having used other of the Boost libraries from the same build/install of 1.53 without any problems. Am I doing anything obviously wrong? Thanks in advance for any help. $ cat test/cma.cpp #define BOOST_TEST_MODULE cma #include <boost/test/unit_test.hpp> #include <iostream> #include <ostream> BOOST_AUTO_TEST_CASE(sanity) { std::clog << "Test the world!\n"; } $ make check [100%] Building CXX object CMakeFiles/test-cma.dir/test/cma.cpp.o Linking CXX executable test-cma [100%] Built target test-cma [100%] Built target check $ env DYLD_LIBRARY_PATH=${TARGET}/lib ./test-cma Running 1 test case... Test the world! Segmentation fault: 11 $ Here are some more details. I'm trying this on Mac with GCC. $ uname -a Darwin Damien-Kicks-MacBook-Pro.local 12.4.0 Darwin Kernel Version 12.4.0: \ Wed May 1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64 x86_64 $ ${CXX} --version g++ (GCC) 4.8.0 Copyright (C) 2013 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. I've compiled my build/install of Boost 1.53 with --std=c++0x. Again, I've used other libraries from this same build/install (DateTime, Filesystem, Random, Regex, Serialization, System, Thread), so I don't think that the problem is my use of --std=c++0x in and of itself. $ ${CXX} -c --std=c++0x -g -I${TARGET}/include cma.cpp -o cma.o $ ${CXX} --std=c++0x -g cma.o ${TARGET}/lib/libboost_test_exec_monitor.a \ ${TARGET}/lib/libboost_unit_test_framework.dylib -o cma $ env DYLD_LIBRARY_PATH=${TARGET}/lib ./cma Running 1 test case... Test the world! Segmentation fault: 11 $ If I run this under GDB (gdb) run Starting program: cma Reading symbols for shared libraries ++++.............................. done Running 1 test case... Test the world! Program received signal EXC_BAD_ACCESS, Could not access memory. Reason: KERN_INVALID_ADDRESS at address: 0x0000000000000000 boost::unit_test::framework::get (id=65536, t=tut_case) at \ impl/framework.ipp:388 388 if( (res->p_type & t) == 0 ) (gdb) bt #0 boost::unit_test::framework::get (id=65536, t=tut_case) at \ impl/framework.ipp:388 #1 0x0000000100134805 in boost::unit_test::traverse_test_tree \ (suite=@0x100403f10, V=@0x7fff5fbff470) at framework.hpp:73 Previous frame inner to this frame (gdb could not unwind past this frame) (gdb) print res $1 = ('boost::unit_test::test_unit' *) 0x0 (gdb) ________________________________ This e-mail and any attachments are confidential. If it is not intended for you, please notify the sender, and please erase and ignore the contents.

2 1

[filesystem] Create file with a unicode filename/path
by Konstantin Kronfeldner 17 Jun '13

17 Jun '13

Hello, I'm working under windows 7 with mingw. I have encountered some weird behaviour with unicode filenames. My program needs to be portable, and I'm using boost::filesystem (v 1.53) to handle the file paths. This has all been going well, until I needed to open files with unicode filenames. This is not about the content of the file, but the file's name/path. I tried the following: For testing I made a folder named C:\UnicodeTest\|????????|and I tried creating a file inside of it, by appending the file name test.txt to the boost wpath. For some reason the creation of the file fails. I'm using boost's fstreams and when I try to open the file, the failbit of the stream is set. Now the funny thing is, that when I append a foldername to the path instead, a call to create_directories() succeeds and creates the correct directory C:\UnicodeTest\|????????|\folder. I really don't understand why it won't work with a file. I have also posted my problem on stackoverflow. http://stackoverflow.com/questions/16875025/open-a-file-with-unicode-path No luck so far. This is the code I use: boost::filesystem::wpath path; // find the folder to test (There are no other folders in C:\UnicodeTest) boost::filesystem::wpath dirPath = "C:\\UnicodeTest"; vector<boost::filesystem::wpath> files; copy(boost::filesystem::directory_iterator(dirPath), boost::filesystem::directory_iterator(), back_inserter(files)); for(boost::filesystem::wpath &file : files) { if(boost::filesystem::is_directory(file)) { path = file; break; } } // create a path for the folder boost::filesystem::wpath folderPath = path / "folder"; // this works just fine boost::filesystem::create_directories(folderPath); // create a path for the file boost::filesystem::wpath filePath = path / "test.txt"; boost::filesystem::ofstream stream; // this fails stream.open(filePath); if(!stream) { cout << "failed to open file " << path << endl; } else { cout << "success" << endl; }

1 0

Comparison boost spirit and ANTLR
by Olivier Austina 17 Jun '13

17 Jun '13

Hi, I would like to choose a parser. I would like to use a parser for text processing (natural language text). Which parser is suited in this case. In general which are the benefit to use boost spirit instead of ANTLR or ANTLR instead of boost spirit. Thank you. -- Regards Austina

9 15

[statechart] state_machine send_event assertion fails
by Gooding, Dustin R. (JSC-ER411) 17 Jun '13

17 Jun '13

Hello, I'm a new user of statechart and for the most part am enjoying it very much. I've implemented a state machine with about 30 states (9 orthogonal regions) and over 50 events. It works very well and as expected, except for this one issue. Every once in a while, and in a way I've been unable to consistently repeat, I get an assertion failure resulting in a core dump. /usr/include/boost/statechart/state_machine.hpp:873: boost::statechart::detail::reaction_result boost::statechart::state_machine<MostDerived, InitialState, Allocator, ExceptionTranslator>::send_event(const event_base_type&) [with MostDerived = GripperPosition, InitialState = Container, Allocator = std::allocator<void>, ExceptionTranslator = boost::statechart::null_exception_translator, boost::statechart::state_machine<MostDerived, InitialState, Allocator, ExceptionTranslator>::event_base_type = boost::statechart::event_base]: Assertion `get_pointer( pOutermostUnstableState_ ) == 0' failed. "GripperPosition" is my state_machine. "Container" is the simple_state the state machine initially enters. Container has no transitions, but many sub states (it's the owner of the 9 orthogonal regions). (As far as I can tell, if the state machine is alive, then "Container" is an active state.) "Container" has a handful of custom_reactions that essentially listen for user-supplied events, "forward" those events in to the appropriate orthogonal regions using internal-only events, and then discard the user-supplied events. The intention here is to have a single event propagate to multiple orthogonal regions, allowing them all to react. For example: boost::statechart::result Container::react(const e_still&) { post_event(i_still_action()); post_event(i_still_moving()); return discard_event(); } I am unsure if these reactions are the cause of the assertion failure, but given that the error message says "Container" is the InitialState, I have to assume so. Given that, I don't see how either Container or GripperPosition are inactive and don't know how to interpret this error. I'd appreciate some guidance. I'm running Ubuntu 12.04, GCC 4.6.3, and Boost 1.46.1. -- Dustin Gooding NASA/JSC Robotics

4 7