- Boost-users - lists.boost.org

Boost version not matching according to the manual
by Arnab Chaudhuri 08 Nov '20

08 Nov '20

To whom it may concern, I have installed boost and to the version is 1.65.1.0ubuntu1 . It is written while installing that the minimum requirement is 1.66. Can you please tell me how to update my version. The commands I used to install boost are as follows: *sudo apt install libboost-dev**sudo apt install libboost-all-dev* *Thanking you,* *Arnab Chaudhuri.*

1 0

Validating downloads on Windows
by Kenneth Porter 08 Nov '20

08 Nov '20

I thought I had a corrupted download and wanted to relate my experience on how to validate the zip file downloads on Windows. The Boost archives (tar, zip, etc.) all have a matching small .json file that contains a SHA256 hash of the archive file. Under Windows 10, you can use certutil.exe from a command line to compute the hash for the archive and compare it to the value in the .json file: C:\Users\ken\Downloads>certutil -hashfile boost_1_75_0_b1_rc1.zip SHA256 SHA256 hash of boost_1_75_0_b1_rc1.zip: 07ddca7c39ea9152bad73bee4f10f2c9c8e3a2d7e153aa945a343f83eca5db59 CertUtil: -hashfile command completed successfully. (I thought my download was corrupted because I was using an ancient version (5.50) of InfoZip's unzip program and it was reporting errors. I updated to version 6 and it unpacked the same file just fine.)

1 0

[release] Boost 1.75.0 Beta 1 Release Candidate 1
by Marshall Clow 07 Nov '20

07 Nov '20

The first release candidates for the 1.75.0 beta release are now available at: <https://dl.bintray.com/boostorg/release/1.75.0.beta1/source/> The SHA256 checksums are as follows: c271f488c7c8de7c147bf8675d578fb2f06c6c171d9547c5a40cddccb9f2a6c4 boost_1_75_0_b1_rc1.7z 0db0944e9d2250907e011900eea304ca055d1c418d38b3fbb1eee692a6b851a6 boost_1_75_0_b1_rc1.tar.bz2 624bd6b03d86bf1387b4e8927dab16b4198f255f15dd71d6a8c1c5ec270584b3 boost_1_75_0_b1_rc1.tar.gz 07ddca7c39ea9152bad73bee4f10f2c9c8e3a2d7e153aa945a343f83eca5db59 boost_1_75_0_b1_rc1.zip As always, the release managers would appreciate it if you download the candidate of your choice and give building it a try. Please report both success and failure, and anything else that is noteworthy. -- The Release managers

2 4

Why did ip::basic_resolver::query get depreciated in 1.66?
by Luke Knoble 06 Nov '20

06 Nov '20

I ask because I replaced its return value with an endpoint in a tcp resolver function and my dns resolution started working..! Cheers, Luke Knoble

1 0

Boost 1.74: Coroutines2 on MSVC 2019 / C++20
by Daniel Petrovic 29 Oct '20

29 Oct '20

Using Boost 1.74. By using coroutines 2 on MSVC 2019 (v16.7.7) with C++20 there is a compilation issue regarding result_of which is replaced by invoke_result in C++20. Is there already some patch for 1.74 or maybe work in progress for 1.75 regarding this issue ? Regards Daniel

2 1

[Signals2] Deprecated header warning VS2017 Boost 1.74
by Peter Barker 27 Oct '20

27 Oct '20

Hi, Just upgraded to Boost 1.74 from Boost 1.71. I'm getting a warning: c:\releases\lib\boost\boost_1_74_0\include\boost\function_output_iterator.hpp(14): note: This header is deprecated. Use <boost/iterator/function_output_iterator.hpp> instead. from this MWE: #include <boost/signals2/signal.hpp> int main() { } I'll have to #define BOOST_ALLOW_DEPRECATED_HEADERS I guess, but I'm surprised Boost libraries are using deprecated Boost headers. Regards, Pete

4 4

A Newbie Boost.Build with Variants Question
by Ryan Heniser 24 Oct '20

24 Oct '20

Hi, I am building Boost 1.61 (we need this old version for other libraries) for the first time at work with Boost.Build (b2). I have successfully built Boost (using b2) for gcc 4.8. If I want to add one or more variants (for example using gcc 6.3), where should I put the Boost header’s include directory? Should one go inside each variant or should just one go at the root directory containing the variant directories? Kind regards, Ryan

2 1

[Newbie][Intrusive] - Beginners question
by Gaier, Bjoern 22 Oct '20

22 Oct '20

Hey everybody, I looked into the boost intrusive container and played around with it a bit. I tried the following code: struct animal : public boost::intrusive::list_base_hook<> { std::string name; int legs; animal(std::string n, int l) : name{std::move(n)}, legs{l} {} }; int main(int argc, char **argv) { std::vector<animal> test; boost::intrusive::list<animal> wuff; for(int n = 0; n < 5; n++) { test.push_back(animal("Katze", 4)); } for(int n = 0; n < 5; n++) { wuff.push_back(test[n]); } for(int n = 0; n < 15; n++) { wuff.push_back(test[n]); } for(auto elem : wuff) { printf("%s\n", elem.name.c_str()); } } This code does crash! I guess this is because "test" relocated the memory and therefor "wuff" lost its references. I would expect the same result if I would have a std::list with pointers to animal structures - this is why I wonder what the benefit of an intrusive container is compared to the same container with just pointers in it. Hope someone can explain me this! Thank you in advance and kind greetings Björn Als GmbH eingetragen im Handelsregister Bad Homburg v.d.H. HRB 9816, USt.ID-Nr. DE 114 165 789 Geschäftsführer: Dr. Hiroshi Nakamura, Dr. Robert Plank, Markus Bode, Heiko Lampert, Takashi Nagano, Junichi Tajika, Ergin Cansiz.

2 2

Does boost promise/future support corroutines?
by David Frank 19 Oct '20

19 Oct '20

Hi, Does boost promise/future support coroutines? For example, the get call only block the running coroutine, instead of the whole thread? Thanks,David

3 3

Boost.MSM: Problem with defered events
by Georg Gast 16 Oct '20

16 Oct '20

Dear Boost users, i am currently writing a driver for the ADS1256 chip with Boost.MSM. Yes, there are other drivers. I do this for training and fun. During the startup phase i need to defer the requests from the user as the SPI bus is not yet available. To model the behaviour the most correct, i tried to model it with MSM. In the transition table, i use the "Defer" action to defer these events. In my Idle state, after the startup phase, there is a transition with this defered event going to the "work" states. In the debugger i can see, that the defered_event_queue holds one defered event and it is of my type but it is not processed. I did use boost 1.67.0 (from debian buster ) and also 1.74.0 (self compiled) to test this. My program can be also compiled under Windows and VS2019 as i handled the hardware interfacing with a abstract class. It works under Windows and 1.74.0. With VS2017 and 1.67.0 it also does not work. Under Linux and gcc it always stops at the Idle state where i wait for the defered event. At the end is my transition table. Any ideas are welcome! Georg // clang-format off struct transition_table : mpl::vector< // +----------------+-------------------+----------------+---------------------------+----------------------+ // Region 0 // +----------------+-------------------+----------------+---------------------------+----------------------+ // Start Event Next Action Guard // +----------------+-------------------+----------------+---------------------------+----------------------+ Row < NotIntialized , ev_Init , WaitDRDYID , none , none >, Row < WaitDRDYID , ev_CheckFlags , ReadID , none , IsDrdy0 >, Row < ReadID , ev_CheckFlags , none , none , none >, Row < ReadID , Spi::Reply , ReadIDFailed , none , IsIDNotOk >, Row < ReadID , Spi::Reply , Idle , none , IsIDOk >, // during the startup phase these event must be defered Row < NotIntialized , ev_MultiStart , none , Defer , none >, Row < WaitDRDYID , ev_MultiStart , none , Defer , none >, Row < ReadID , ev_MultiStart , none , Defer , none >, // +----------------+-------------------+----------------+---------------------------+----------------------+ Row < Idle , ev_CheckFlags , none , none , none >, Row < Idle , ev_MultiStart , MConfigWaitDRDY, none , none >, // +----------------+-------------------+----------------+---------------------------+----------------------+ Row < MConfigWaitDRDY, ev_CheckFlags , MSwitchConfig , none , IsDrdy0 >, Row < MSwitchConfig , ev_CheckFlags , none , none , none >, Row < MSwitchConfig , Spi::Reply , MMuxWaitDRDY , none , IsECNotFailed >, Row < MMuxWaitDRDY , ev_CheckFlags , MSwitchMux , none , IsDrdy0 >, Row < MSwitchMux , ev_CheckFlags , none , none , none >, Row < MSwitchMux , Spi::Reply , MSync , none , IsECNotFailed >, Row < MSync , Spi::Reply , MDataWaitDRDY , none , IsECNotFailed >, Row < MDataWaitDRDY , ev_CheckFlags , MReadData , none , IsDrdy0 >, Row < MReadData , ev_CheckFlags , none , none , none >, Row < MReadData , Spi::Reply , Idle , WorkDone , IsWorkDone >, Row < MReadData , Spi::Reply , MMuxWaitDRDY , RemoveDoneWork , IsStillWorkTodo >, // +----------------+-------------------+----------------+---------------------------+----------------------+ // Region 1 // +----------------+-------------------+----------------+---------------------------+----------------------+ Row < DrdyUndefined , ev_DRDY_0 , Drdy0 , none , none >, Row < DrdyUndefined , ev_DRDY_1 , Drdy1 , none , none >, Row < Drdy0 , ev_DRDY_0 , none , none , none >, Row < Drdy0 , ev_DRDY_1 , Drdy1 , none , none >, Row < Drdy1 , ev_DRDY_0 , Drdy0 , none , none >, Row < Drdy1 , ev_DRDY_1 , none , none , none >, // +----------------+-------------------+----------------+---------------------------+----------------------+ // Region 2 // +----------------+-------------------+----------------+---------------------------+----------------------+ // Start Event Next Action Guard // +----------------+-------------------+----------------+---------------------------+----------------------+ Row < AllOk , Spi::Reply , ErrorMode , none , IsECFailed > // +----------------+-------------------+----------------+---------------------------+----------------------+ > {}; // clang-format on

1 0