beginner question about boost Unit test framework
I am using Boost 1.31 with VC 6.0. I am testing the simplest example provided in the boost document. It seems "boost::unit_test" is not a valid namespace. After I change it to "boost::unit_test_framwork", it can compile but can not link, the error I got is "LINK : fatal error LNK1561: entry point must be defined". The exmaple I used: #include <boost/test/unit_test.hpp> using namespace boost::unit_test; test_suite* init_unit_test_suite( int argc, char* argv[] ) { test_suite* test= BOOST_TEST_SUITE( "const_string test" ); return test; } Thanks for any help
J Liu writes:
I am using Boost 1.31 with VC 6.0. I am testing the simplest example provided in the boost document. It seems "boost::unit_test" is not a valid namespace. After I change it to "boost::unit_test_framwork", it can compile but can not link, the error I got is "LINK : fatal error LNK1561: entry point must be defined".
IIRC there were significant changes to the unit test framework between V1.31 and V1.32, and the document you're looking at almost certainly describes 1.32. Try upgrading Boost and see what happens. (The 1.32 version of the unit test framework was actually a big influence on our decision to officially move our code base from using 1.31 to 1.32.) ---------------------------------------------------------------------- Dave Steffen, Ph.D. "There are two ways to write error-free Software Engineer IV programs; only the third one works." Numerica Corporation ph (970) 419-8343 x27 "Pie are not square. Pie are round. fax (970) 223-6797 Cornbread are square" dgsteffen@numerica.us ... anon (usenet) ___________________ Numerica Disclaimer: This message and any attachments are intended only for the individual or entity to which the message is addressed. It is proprietary and may contain privileged information. If you are neither the intended recipient nor the agent responsible for delivering the message to the intended recipient, you are hereby notified that any review, retransmission, dissemination, or taking of any action in reliance upon, the information in this communication is strictly prohibited, and may be unlawful. If you feel you have received this communication in error, please notify us immediately by returning this Email to the sender and deleting it from your computer.
I am using VC6.0 so I can not use boost1.32. I tried the boost1.31 example, I got the same link error. Below is the command I used for linking... cl /nologo /EHsc- /Zi /Yd /Od /MDd /Zm200 /FD -D_DEBUG_MEMORY -I. -I.\include -IC:\dev\head\server\boost_ 1_31_0 /Fe..\bin\test_cmdparse.exe test_cmdparse.obj -link C:\dev\head\server\boost_1_31_0\stage\lib\libboost_test_exec_monitor-vc6-m t-gd-1_31.lib C:\dev\head\yukon-server\boost_1_31_0\stage\lib\libboost_unit_test_framework-vc6-mt-gd-1_31.lib C:\dev\head\yukon-server\boost_1_31_0\stage\lib\libboost_prg_exec_monitor-vc6-mt-gd-1_31.lib From: "Dave Steffen" <dgsteffen@numerica.us>
J Liu writes:
I am using Boost 1.31 with VC 6.0. I am testing the simplest example provided in the boost document. It seems "boost::unit_test" is not a valid namespace. After I change it to "boost::unit_test_framwork", it can compile but can not link, the error I got is "LINK : fatal error LNK1561: entry point must be defined".
IIRC there were significant changes to the unit test framework between V1.31 and V1.32, and the document you're looking at almost certainly describes 1.32. Try upgrading Boost and see what happens.
(The 1.32 version of the unit test framework was actually a big influence on our decision to officially move our code base from using 1.31 to 1.32.)
---------------------------------------------------------------------- Dave Steffen, Ph.D. "There are two ways to write error-free Software Engineer IV programs; only the third one works." Numerica Corporation ph (970) 419-8343 x27 "Pie are not square. Pie are round. fax (970) 223-6797 Cornbread are square" dgsteffen@numerica.us ... anon (usenet) ___________________ Numerica Disclaimer: This message and any attachments are intended only for the individual or entity to which the message is addressed. It is proprietary and may contain privileged information. If you are neither the intended recipient nor the agent responsible for delivering the message to the intended recipient, you are hereby notified that any review, retransmission, dissemination, or taking of any action in reliance upon, the information in this communication is strictly prohibited, and may be unlawful. If you feel you have received this communication in error, please notify us immediately by returning this Email to the sender and deleting it from your computer.
I had a similar problem because I accidentally tried to build a GUI program instead of a console program. When I used the linker flag "/subsystem:console" it fixed the problem. Jason At 05:52 PM 7/19/2005, you wrote:
I am using VC6.0 so I can not use boost1.32. I tried the boost1.31 example, I got the same link error.
Below is the command I used for linking...
cl /nologo /EHsc- /Zi /Yd /Od /MDd /Zm200 /FD -D_DEBUG_MEMORY -I. -I.\include -IC:\dev\head\server\boost_ 1_31_0 /Fe..\bin\test_cmdparse.exe test_cmdparse.obj -link C:\dev\head\server\boost_1_31_0\stage\lib\libboost_test_exec_monitor-vc6-m t-gd-1_31.lib C:\dev\head\yukon-server\boost_1_31_0\stage\lib\libboost_unit_test_framework-vc6-mt-gd-1_31.lib
C:\dev\head\yukon-server\boost_1_31_0\stage\lib\libboost_prg_exec_monitor-vc6-mt-gd-1_31.lib
From: "Dave Steffen" <dgsteffen@numerica.us>
J Liu writes:
I am using Boost 1.31 with VC 6.0. I am testing the simplest example provided in the boost document. It seems "boost::unit_test" is not a valid namespace. After I change it to "boost::unit_test_framwork", it can compile but can not link, the error I got is "LINK : fatal error LNK1561: entry point must be defined".
IIRC there were significant changes to the unit test framework between V1.31 and V1.32, and the document you're looking at almost certainly describes 1.32. Try upgrading Boost and see what happens.
(The 1.32 version of the unit test framework was actually a big influence on our decision to officially move our code base from using 1.31 to 1.32.)
---------------------------------------------------------------------- Dave Steffen, Ph.D. "There are two ways to write error-free Software Engineer IV programs; only the third one works." Numerica Corporation ph (970) 419-8343 x27 "Pie are not square. Pie are round. fax (970) 223-6797 Cornbread are square" dgsteffen@numerica.us ... anon (usenet) ___________________ Numerica Disclaimer: This message and any attachments are intended only for the individual or entity to which the message is addressed. It is proprietary and may contain privileged information. If you are neither the intended recipient nor the agent responsible for delivering the message to the intended recipient, you are hereby notified that any review, retransmission, dissemination, or taking of any action in reliance upon, the information in this communication is strictly prohibited, and may be unlawful. If you feel you have received this communication in error, please notify us immediately by returning this Email to the sender and deleting it from your computer.
Boost-users mailing list Boost-users@lists.boost.org http://lists.boost.org/mailman/listinfo.cgi/boost-users
YEAH! This works. Thanks a lot. "Jason Stewart" <jstewart@pobox.com> wrote in message news:6.2.1.2.2.20050720102748.042a5148@pobox.com...
I had a similar problem because I accidentally tried to build a GUI program instead of a console program. When I used the linker flag "/subsystem:console" it fixed the problem.
Jason
At 05:52 PM 7/19/2005, you wrote:
I am using VC6.0 so I can not use boost1.32. I tried the boost1.31 example, I got the same link error.
Below is the command I used for linking...
cl /nologo /EHsc- /Zi /Yd /Od /MDd /Zm200 /FD -D_DEBUG_MEMORY -I. -I.\include -IC:\dev\head\server\boost_ 1_31_0 /Fe..\bin\test_cmdparse.exe test_cmdparse.obj -link C:\dev\head\server\boost_1_31_0\stage\lib\libboost_test_exec_monitor-vc6-m t-gd-1_31.lib C:\dev\head\yukon-server\boost_1_31_0\stage\lib\libboost_unit_test_framework-vc6-mt-gd-1_31.lib
C:\dev\head\yukon-server\boost_1_31_0\stage\lib\libboost_prg_exec_monitor-vc6-mt-gd-1_31.lib
From: "Dave Steffen" <dgsteffen@numerica.us>
J Liu writes:
I am using Boost 1.31 with VC 6.0. I am testing the simplest example provided in the boost document. It seems "boost::unit_test" is not a valid namespace. After I change it to "boost::unit_test_framwork", it can compile but can not link, the error I got is "LINK : fatal error LNK1561: entry point must be defined".
IIRC there were significant changes to the unit test framework between V1.31 and V1.32, and the document you're looking at almost certainly describes 1.32. Try upgrading Boost and see what happens.
(The 1.32 version of the unit test framework was actually a big influence on our decision to officially move our code base from using 1.31 to 1.32.)
---------------------------------------------------------------------- Dave Steffen, Ph.D. "There are two ways to write error-free Software Engineer IV programs; only the third one works." Numerica Corporation ph (970) 419-8343 x27 "Pie are not square. Pie are round. fax (970) 223-6797 Cornbread are square" dgsteffen@numerica.us ... anon (usenet) ___________________ Numerica Disclaimer: This message and any attachments are intended only for the individual or entity to which the message is addressed. It is proprietary and may contain privileged information. If you are neither the intended recipient nor the agent responsible for delivering the message to the intended recipient, you are hereby notified that any review, retransmission, dissemination, or taking of any action in reliance upon, the information in this communication is strictly prohibited, and may be unlawful. If you feel you have received this communication in error, please notify us immediately by returning this Email to the sender and deleting it from your computer.
Boost-users mailing list Boost-users@lists.boost.org http://lists.boost.org/mailman/listinfo.cgi/boost-users
I'm sorry about quoting all of that last message. I hit send before I thought. Jason
I am using Boost 1.31 with VC 6.0. I am testing the simplest example provided in the boost document. It seems "boost::unit_test" is not a valid
boost::unit_test is started to be used in 1.32
namespace. After I change it to "boost::unit_test_framwork", it can compile but can not link, the error I got is "LINK : fatal error LNK1561: entry point must be defined".
What are you trying to link? What kind of project? Could you list of your libs and sources? Gennadiy
Below is the command I used for linking... cl /nologo /EHsc- /Zi /Yd /Od /MDd /Zm200 /FD -D_DEBUG_MEMORY -I. -I.\include -IC:\dev\head\server\boost_ 1_31_0 /Fe..\bin\test_cmdparse.exe test_cmdparse.obj -link C:\dev\head\server\boost_1_31_0\stage\lib\libboost_test_exec_monitor-vc6-m t-gd-1_31.lib C:\dev\head\yukon-server\boost_1_31_0\stage\lib\libboost_unit_test_framework-vc6-mt-gd-1_31.lib C:\dev\head\yukon-server\boost_1_31_0\stage\lib\libboost_prg_exec_monitor-vc6-mt-gd-1_31.lib LINK : fatal error LNK1561: entry point must be defined "Gennadiy Rozental" <gennadiy.rozental@thomson.com> wrote in message news:dbjrtv$scg$1@sea.gmane.org...
boost::unit_test is started to be used in 1.32 But I found it in 1.31 and there are some examples. I can not run anyone of them
boost::unit_test is started to be used in 1.32 But I found it in 1.31 and there are some examples. I can not run anyone of them
I think you are mistaken. The cause for your problem could be that you have both 1.31 and 1.32 installed and you are compiling pointing to 1.32 while linking with libs build with 1.32 or vice versa. Gennadiy
I think my problem is how to use the boost test .lib to link the test program. I tried to put #include <boost/test/included/unit_test_framework.hpp> in the code and it works. But in this case I have to put the boost src code in there. What I want is only use the header files and the generated libs. I dont know how to correctly link the libs with the program. Thanks for any help. Jian "J Liu" <johnny_spring@hotmail.com> wrote in message news:dbjqb1$rvv$1@sea.gmane.org...
I am using Boost 1.31 with VC 6.0. I am testing the simplest example provided in the boost document. It seems "boost::unit_test" is not a valid namespace. After I change it to "boost::unit_test_framwork", it can compile but can not link, the error I got is "LINK : fatal error LNK1561: entry point must be defined".
The exmaple I used:
#include <boost/test/unit_test.hpp> using namespace boost::unit_test;
test_suite* init_unit_test_suite( int argc, char* argv[] ) { test_suite* test= BOOST_TEST_SUITE( "const_string test" ); return test; }
Thanks for any help
participants (4)
-
Dave Steffen -
Gennadiy Rozental -
J Liu -
Jason Stewart