I built Boost 1.40 on Linux and installed it Ok. However are the libraries singlethreaded or multithreaded? eg. the library names are like this: libboost_python.so libboost_python.so.1.40.0 The older versions had -mt- in their name. eg. libboost_python-gcc43-mt.so etc. Thanks Andrew -- ___________________________________________ Andrew J. P. Maclean Centre for Autonomous Systems The Rose Street Building J04 The University of Sydney 2006 NSW AUSTRALIA Ph: +61 2 9351 3283 Fax: +61 2 9351 7474 URL: http://www.acfr.usyd.edu.au/ ___________________________________________
Consistency with system library naming is more important than usefulness, it would seem.
-----Original Message----- From: boost-users-bounces@lists.boost.org [mailto:boost-users- bounces@lists.boost.org] On Behalf Of Andrew Maclean Sent: Tuesday, September 01, 2009 6:21 PM To: boost-users@lists.boost.org Subject: [Boost-users] Building Boost 1.40
I built Boost 1.40 on Linux and installed it Ok. However are the libraries singlethreaded or multithreaded? eg. the library names are like this: libboost_python.so libboost_python.so.1.40.0
The older versions had -mt- in their name. eg. libboost_python-gcc43-mt.so etc.
Thanks Andrew
-- ___________________________________________ Andrew J. P. Maclean Centre for Autonomous Systems The Rose Street Building J04 The University of Sydney 2006 NSW AUSTRALIA Ph: +61 2 9351 3283 Fax: +61 2 9351 7474 URL: http://www.acfr.usyd.edu.au/ ___________________________________________ _______________________________________________ Boost-users mailing list Boost-users@lists.boost.org http://lists.boost.org/mailman/listinfo.cgi/boost-users
TradeStation Group, Inc. is a publicly-traded holding company (NASDAQ GS: TRAD) of three operating subsidiaries, TradeStation Securities, Inc. (Member NYSE, FINRA, SIPC and NFA), TradeStation Technologies, Inc., a trading software and subscription company, and TradeStation Europe Limited, a United Kingdom, FSA-authorized introducing brokerage firm. None of these companies provides trading or investment advice, recommendations or endorsements of any kind. The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any computer.
AMDG Andrew Maclean wrote:
I built Boost 1.40 on Linux and installed it Ok. However are the libraries singlethreaded or multithreaded? eg. the library names are like this: libboost_python.so libboost_python.so.1.40.0
The older versions had -mt- in their name. eg. libboost_python-gcc43-mt.so etc.
The libraries built by default are multithreaded. In Christ, Steven Watanabe
Thankyou. Actually I quite like the new file naming convention. Andrew On Wed, Sep 2, 2009 at 10:09 AM, Steven Watanabe<watanabesj@gmail.com> wrote:
AMDG
Andrew Maclean wrote:
I built Boost 1.40 on Linux and installed it Ok. However are the libraries singlethreaded or multithreaded? eg. the library names are like this: libboost_python.so libboost_python.so.1.40.0
The older versions had -mt- in their name. eg. libboost_python-gcc43-mt.so etc.
The libraries built by default are multithreaded.
In Christ, Steven Watanabe
_______________________________________________ Boost-users mailing list Boost-users@lists.boost.org http://lists.boost.org/mailman/listinfo.cgi/boost-users
-- ___________________________________________ Andrew J. P. Maclean Centre for Autonomous Systems The Rose Street Building J04 The University of Sydney 2006 NSW AUSTRALIA Ph: +61 2 9351 3283 Fax: +61 2 9351 7474 URL: http://www.acfr.usyd.edu.au/ ___________________________________________
Andrew Maclean wrote:
I built Boost 1.40 on Linux and installed it Ok. However are the libraries singlethreaded or multithreaded? eg. the library names are like this: libboost_python.so libboost_python.so.1.40.0
The older versions had -mt- in their name. eg. libboost_python-gcc43-mt.so etc.
Hi! You can use --layout parameter to change libraries naming convention. Use the following command to see possible options: $ bjam --help | grep -A25 layout
Thanks Andrew
Dmitry V. Krivenok wrote:
Andrew Maclean wrote:
I built Boost 1.40 on Linux and installed it Ok. However are the libraries singlethreaded or multithreaded? eg. the library names are like this: libboost_python.so libboost_python.so.1.40.0
The older versions had -mt- in their name. eg. libboost_python-gcc43-mt.so etc.
Hi!
You can use --layout parameter to change libraries naming convention. Use the following command to see possible options:
$ bjam --help | grep -A25 layout
Thanks Andrew
Indeed, I noticed this same issue as Andrew when I built it, at first I thought this would be fine, but when I tried to compile, boost was still trying to link against the no-longer-existing -mt- versions. I ended up using --layout to use the old naming convention, but how might I go about ensuring that it compiles correctly? I'm using Boost.Build for project management, here's my configuration: geoff@venus:~$ cat /etc/site-config.jam # Copyright 2002, 2003 Vladimir Prus # Distributed under the Boost Software License, Version 1.0. # (See accompanying file LICENSE_1_0.txt or http://www.boost.org/LICENSE_1_0.txt) project site-config ; using gcc ; using python : 2.6 : /usr ; import os ; local BOOST_ROOT = [ os.environ BOOST_ROOT ] ; using boost : 1.40 : <include>$(BOOST_ROOT) <library>/usr/local/lib ; lib libxslt : #no sources : <file>/usr/lib/libxslt.so.1 ; lib libxml2 : libxslt : <name>xml2 <search>/usr/lib : : <include>/usr/include/libxml2 ; geoff@venus:~$ cat user-config.jam (possibly unnecessary, but posting for the sake of being complete). project user-config ; import os ; local HOME = [ os.environ HOME ] ; lib opencl : #no sources : <name>OpenCL <search>$(HOME)/NVIDIA_GPU_Computing_SDK/OpenCL/common/lib/Linux64 : : <include>$(HOME)/NVIDIA_GPU_Computing_SDK/OpenCL/common/inc/ ; geoff@venus:~/boostTest$ cat Jamroot.jam import boost ; boost.use-project ; exe boostTest : [ glob *.cpp ] : <define>BOOST_LIB_DIAGNOSTIC=1 <library>/site-config//libxml2 <library>/boost//filesystem <library>/boost//system <library>/boost//program_options <threading>multi ; How might I make it compile correctly? Unrelatedly, how might I improve my current jam files in any way? Thanks, Geoff
I use CMake and found I had to reconfigure and after tis the correct libraries were linked in with no problems. If you run make it may look for the older libraries first. On Thu, Sep 10, 2009 at 2:03 AM, Geoff Hilton <geoff.hilton@t-optlogic.com> wrote:
Dmitry V. Krivenok wrote:
Andrew Maclean wrote:
I built Boost 1.40 on Linux and installed it Ok. However are the libraries singlethreaded or multithreaded? eg. the library names are like this: libboost_python.so libboost_python.so.1.40.0
The older versions had -mt- in their name. eg. libboost_python-gcc43-mt.so etc.
Hi!
You can use --layout parameter to change libraries naming convention. Use the following command to see possible options:
$ bjam --help | grep -A25 layout
Thanks Andrew
Indeed, I noticed this same issue as Andrew when I built it, at first I thought this would be fine, but when I tried to compile, boost was still trying to link against the no-longer-existing -mt- versions. I ended up using --layout to use the old naming convention, but how might I go about ensuring that it compiles correctly?
I'm using Boost.Build for project management, here's my configuration:
geoff@venus:~$ cat /etc/site-config.jam # Copyright 2002, 2003 Vladimir Prus # Distributed under the Boost Software License, Version 1.0. # (See accompanying file LICENSE_1_0.txt or http://www.boost.org/LICENSE_1_0.txt) project site-config ; using gcc ; using python : 2.6 : /usr ; import os ; local BOOST_ROOT = [ os.environ BOOST_ROOT ] ; using boost : 1.40 : <include>$(BOOST_ROOT) <library>/usr/local/lib ; lib libxslt : #no sources : <file>/usr/lib/libxslt.so.1 ; lib libxml2 : libxslt : <name>xml2 <search>/usr/lib : : <include>/usr/include/libxml2 ;
geoff@venus:~$ cat user-config.jam (possibly unnecessary, but posting for the sake of being complete).
project user-config ; import os ; local HOME = [ os.environ HOME ] ; lib opencl : #no sources : <name>OpenCL <search>$(HOME)/NVIDIA_GPU_Computing_SDK/OpenCL/common/lib/Linux64 : : <include>$(HOME)/NVIDIA_GPU_Computing_SDK/OpenCL/common/inc/ ;
geoff@venus:~/boostTest$ cat Jamroot.jam import boost ; boost.use-project ; exe boostTest : [ glob *.cpp ] : <define>BOOST_LIB_DIAGNOSTIC=1 <library>/site-config//libxml2 <library>/boost//filesystem <library>/boost//system <library>/boost//program_options <threading>multi ;
How might I make it compile correctly?
Unrelatedly, how might I improve my current jam files in any way?
Thanks, Geoff
_______________________________________________ Boost-users mailing list Boost-users@lists.boost.org http://lists.boost.org/mailman/listinfo.cgi/boost-users
-- ___________________________________________ Andrew J. P. Maclean Centre for Autonomous Systems The Rose Street Building J04 The University of Sydney 2006 NSW AUSTRALIA Ph: +61 2 9351 3283 Fax: +61 2 9351 7474 URL: http://www.acfr.usyd.edu.au/ ___________________________________________
Andrew Maclean wrote:
I use CMake and found I had to reconfigure and after tis the correct libraries were linked in with no problems. If you run make it may look for the older libraries first.
On Thu, Sep 10, 2009 at 2:03 AM, Geoff Hilton <geoff.hilton@t-optlogic.com> wrote:
Dmitry V. Krivenok wrote:
Andrew Maclean wrote:
I built Boost 1.40 on Linux and installed it Ok. However are the libraries singlethreaded or multithreaded? eg. the library names are like this: libboost_python.so libboost_python.so.1.40.0
The older versions had -mt- in their name. eg. libboost_python-gcc43-mt.so etc. Hi!
You can use --layout parameter to change libraries naming convention. Use the following command to see possible options:
$ bjam --help | grep -A25 layout
Thanks Andrew Indeed, I noticed this same issue as Andrew when I built it, at first I thought this would be fine, but when I tried to compile, boost was still trying to link against the no-longer-existing -mt- versions. I ended up using --layout to use the old naming convention, but how might I go about ensuring that it compiles correctly?
I'm using Boost.Build for project management, here's my configuration:
geoff@venus:~$ cat /etc/site-config.jam # Copyright 2002, 2003 Vladimir Prus # Distributed under the Boost Software License, Version 1.0. # (See accompanying file LICENSE_1_0.txt or http://www.boost.org/LICENSE_1_0.txt) project site-config ; using gcc ; using python : 2.6 : /usr ; import os ; local BOOST_ROOT = [ os.environ BOOST_ROOT ] ; using boost : 1.40 : <include>$(BOOST_ROOT) <library>/usr/local/lib ; lib libxslt : #no sources : <file>/usr/lib/libxslt.so.1 ; lib libxml2 : libxslt : <name>xml2 <search>/usr/lib : : <include>/usr/include/libxml2 ;
geoff@venus:~$ cat user-config.jam (possibly unnecessary, but posting for the sake of being complete).
project user-config ; import os ; local HOME = [ os.environ HOME ] ; lib opencl : #no sources : <name>OpenCL <search>$(HOME)/NVIDIA_GPU_Computing_SDK/OpenCL/common/lib/Linux64 : : <include>$(HOME)/NVIDIA_GPU_Computing_SDK/OpenCL/common/inc/ ;
geoff@venus:~/boostTest$ cat Jamroot.jam import boost ; boost.use-project ; exe boostTest : [ glob *.cpp ] : <define>BOOST_LIB_DIAGNOSTIC=1 <library>/site-config//libxml2 <library>/boost//filesystem <library>/boost//system <library>/boost//program_options <threading>multi ;
How might I make it compile correctly?
Unrelatedly, how might I improve my current jam files in any way?
Thanks, Geoff
Not quite sure I understand what you mean. Because boost is supposed to be auto-linking and such (especially with boost.build) I don't see what there is I could change. The above configuration files are all I have which are relevent, notice especially the site-config.jam file. Geoff
participants (5)
-
Andrew Maclean -
Dmitry V. Krivenok -
Geoff Hilton -
John Dlugosz -
Steven Watanabe