December 2019 - Boost - lists.boost.org

CMake Announcement from Boost Steering Committee
by Jon Kalb 13 Aug '24

13 Aug '24

The libraries produced by the Boost community have had a greater impact on the way that the C++ community writes code than any other library implementation. The focus of the Boost community will always be on the libraries, but it is undeniable that we are dependent on and often limited by the infrastructure of our trade. Years ago, the move to Git was contentious; yet, it was required to improve development. In a similar vein our build system has become an impediment for many developers and users, existing and prospective. Therefore, we, the Steering Committee, announce to the Boost community our desire and intent to move Boost’s build system to CMake for users and developers alike. We are soliciting comments and proposals from the community to guide the process and the goals. Our desire is that the community can come to consensus by the end of the calendar year with a vision of supporting users and developers. We understand that the actual process of achieving the end goal will be long, time consuming, and not without its share of conflict. We also recognize that the Boost community is comprised of bright and passionate individuals that are eager to get involved and help get work done. The members of the Steering Committee have been encouraged by the discussions and activity surrounding CMake on the mailing lists over the years and know that many people have voiced visions. We hope that each of you rejoins the discussion to support this initiative and contributes to the common goal of improving Boost’s integration into the broader C++ ecosystem. For the Boost Steering Committee, Jon Kalb, Chair jonkalb(a)boost.org

49 200

What happened to Boost.Nowide?
by Alexander Grund 08 Jan '20

08 Jan '20

Hi, I'm a user of (a fork of) Boost.Nowide and already fixed some issues I found and was looking into getting them upstream. I also wanted to know, if it is finally in Boost. Unfortunately this does not seem to be the case. I found https://lists.boost.org/Archives/boost//2017/06/236475.php which accepted it into Boost. This is from mid-2017 and nothing has happened since. Does anyone know what the status of Boost.Nowide is? It seems the filestream parts are now incorporated into Boost.FileSystem. So it seems only cin/cout/cerr, the args wrapper and the C-functions (fopen, ...) are missing. Especially the first 2 are very useful in writing cross-platform code. Might those be integrated into some other Boost Library? Thanks, Alex

4 16

Boost ASIO
by live man 03 Jan '20

03 Jan '20

Hi, We have been using Boost for our firmware product which runs in ARM processor. However for development we make use of Visual Studio IDE. We also have our own TCP / IP suite which defines its own socket.h file. We are facing issue related to using Boost ASIO in Windows development platform. It seems that the library by default includes windows networking header files - which we do not want. Instead we want Boost ASIO to make our own library socket headers and declaration. We noticed that if we include Boost ASIO and our TCP / IP socket declaration we get re-definition error and compilation fails with lots of errors? Please let us know how we can resolve the issue with the objective mentioned above? Thanks in advance. Regards, Prakash

2 2

Recomended way of generating documentation
by Alexander Grund 01 Jan '20

01 Jan '20

Hi, I'm currently in the process of generating documentation in a Boost usable format and got a couple questions. The documentation is currently in-source in Doxygen format and has a markdown file for the start page. 1. Which aliases do I need and for what? I've seen boostdoc and boostrelease but couldn't find a description what and why they are 2. Where do the documentation files need to go? It seems using BJam naively outputs them to bin.v2 not to the libraries doc folder which I'd even see useful because generated files should not clobber the source tree 3. What benefit is there going from Doxygen (over multiple conversions) to boostbook? Can't I just go from Doxygen to HTML? 4. If the above: Calling `doxygen mylib.html` in BJam generates a mylib folder and a mylib.html redirecting into that folder. Both hardcoded to go into a subfolder of bin.v2. How is that useful/useable? Wouldn't I want a 'html' folder and an index.html redirecting to the index.html contained or no redirection file at all? 5. As I'm thinking about calling doxygen manually: Do I need to do anything so e.g. mylib shows up in boost/doc/html? Why is only a subset of the libraries there? Thanks for any help or pointers! Alexander Grund

6 5

Boost-GIL GSOC 2020
by Siddhartha Sen 31 Dec '19

31 Dec '19

Hello, I would like to propose an idea for GSOC 2020. I would like to re-implement pre existing features in Boost-GIL for example inverting an image, conversion from black and white to colour and vice versa, etc, but with the usage of parallel programming in order to improve the efficiency and speed things up. This is nothing but an idea merely, as I have some idea with parallel programming beforehand. Could anyone give me some guidance as in how to proceed with this? And also do you all think this is a good enough proposal? I already have built a couple of libraries for image conversion using openmp, but I am not sure whether they are boost compatible or not. Thank You.

2 1

Re: [boost] [review] [STLInterfaces] STLInterfaces review starts today
by Andreas Wass 28 Dec '19

28 Dec '19

This my small review of STLInterfaces, and mainly iterator_interface > - Your name Andreas Wass > - Your knowledge of the problem domain I implement mainly iterators every once in a while, both at work and for personal projects. I have mainly used iterator_interface but used container_interface as well. > - Whether you believe the library should be accepted into Boost (be clear > about this) Yes, it helps cutting down on the amount of boilerplate to write. > In addition, you are strongly encouraged to answer the following questions: > - What is your evaluation of the library's > * Design? The design seems solid > * Implementation? Looks solid as well, only had one issue with container_interface (see below). > * Documentation? It is ok. As someone who isn't implementing containers all that often it would be nice to have signatures as well as expressions listed in the container_interface documentation > - Did you attempt to use the library? If so: > * Which compiler(s)? MSVC 2017 and GCC 9 > * What was the experience? Any problems? One problem with container_interface. See https://github.com/tzlaine/stl_interfaces/issues/12 > - How much effort did you put into your evaluation of the review? About two hours implementing iterators and a container

4 5

[review][STLInterfaces] STLInterfaces review results
by Barrett Adair 26 Dec '19

26 Dec '19

Many thanks are owed to all who participated in the formal review of Zach Laine's STLInterfaces library, especially during this busy holiday season: * Hadriel Kaplan - ACCEPT * Andreas Wass - ACCEPT * Rainer Deyke - ACCEPT * Arthur Gruzauskas - ACCEPT * Krystian Stasiowski - ACCEPT * Daniela Engert - CONDITIONALLY ACCEPT * Gavin Lambert - Technical comments First, a summary of the reviews: 1. Design Reviewers were unanimous in their appreciation for the design. Krystian had the only asterisk about the design, noting that derived class members should ideally be SFINAE-detected, where the library feature would SFINAE where the corresponding required derived feature detection fails. I have a different opinion about this, but we can discuss that elsewhere. 2. Implementation The container_interface destructor and the optional dependency on cmcstl2 were snags for multiple reviewers. Several compile errors were discovered that need to be addressed. 3. Documentation Reviewers found the documentation to be "ok". A common request was for better organization of derived-class requirements, particularly with the container_interface template. Reviewers also lamented the lack of training wheels for the subject matter. 4. Tests Hadriel noted the lack of non-copyable value_type tests, while Daniela noted the lack of Boost.Build support. Hadriel was the only one who commented on the quality of tests ("good"), and the only one who ran them. Arthur did his own testing, to satisfaction. I appreciate the presence of SFINAE-friendliness tests and the continuous integration. 5. Usefulness Reviewers appreciated the usefulness of the library. Arthur is "using it happily", while others found it "very useful", "fairly useful", or of "high" usefulness. However, Krystian's response implied that this library may not be as useful for containers needing extreme performance. The reviews clearly demonstrate a consensus. Accordingly, I'm pleased to announce that STLInterfaces is CONDITIONALLY ACCEPTED as a Boost library. Conditions for acceptance: 1. Remove optional dependency on cmcstl2 (issue #27) 2. Add Boost license comments to all files, including appveyor.yml, .travis.yml, README.md, */CMakeLists.txt (issue #26) 3. Support Boost.Build (issue #25) 4. Replace googletest with Boost equivalent (issue #24) 5. Remove usage of non-existent v2_dtl members in container_interface.hpp (issue #22) 6. Include <tuple> for std::tie usage in C++14 mode (issue #21) 7. Fix dangling parens in container_inteface.hpp:731 (issue #20) 8. Make Concepts usage C++20-conformant (issue #13) 9. Remove the destructor in container_interface (issue #12) 10. Add tests for non-copyable value types (issue #30) Suggestions: 1. Explicitly document the signatures and return types of functions provided by base class templates (issue #23) 2. Mention the C++20 generator pattern in documentation (issue #19) 3. Document the library's interactions with Ranges (issue #18) 4. Remove unnecessary comments (issue #17) 5. Investigate compile error in VS2015 (msvc 19.0.3) due to issues with noexcept() operator in function overloading (issue #16) 6. Rename container_interface to sequence_container_interface (issue #15) 7. Change the 'contiguous' bool to an enum (issue #14) 8. Document the relationship between value_type operator== and containter_interface-defined operator== (issue #11) 9. Improve table/section names for better navigation of container_interface tutorial (issue #10) 10. Clean up BOOST_STL_INTERFACES_DOXYGEN usage (issue #28) 11. Split up fwd.hpp into multiple headers (issue #29) 12. Document optimization trade-offs of proxy_iterator_interface (issue #30) Rationale: 1. Condition #1 is, I feel, the appropriate default as review manager. If Zach feels strongly about keeping the optional dependency on cmcstl2, we should discuss. 2. Unless the library requirements webpage has fallen out of date, new libraries must still support Boost.Build. 3. A not-so-quick grep of current Boost libraries yields no `gtest` results. I assume that we do not allow googletest as the sole test framework in a library. 4. The other conditions should be self-explanatory. Thank you Zach for your contributions, and I look forward to working with you to add this library into Boost. Regards, Barrett Adair

2 2

[review] [STLInterfaces] STLInterfaces review starts today
by Barrett Adair 26 Dec '19

26 Dec '19

Dear Boost, The formal review of Zach Laine's STLInterfaces library begins now, and will run through December 19. Please participate in this review if you can. To submit a review, please reply to this email with the following information: - Your name - Your knowledge of the problem domain - Whether you believe the library should be accepted into Boost (be clear about this) In addition, you are strongly encouraged to answer the following questions: - What is your evaluation of the library's * Design? * Implementation? * Documentation? * Tests? * Usefulness? - Did you attempt to use the library? If so: * Which compiler(s)? * What was the experience? Any problems? - How much effort did you put into your evaluation of the review? STLInterfaces is a C++14 library targeting ISO standardization. The following templates are provided, all C++20-friendly: 1. iterator_interface - a modern version of the iterator_facade and iterator_adaptor parts of Boost.Iterator 2. view_interface - a pre-C++20 implementation of C++20's eponymous feature 3. container_interface - a tool to eliminate boilerplate when writing new containers We would appreciate answers to these library-specific questions: - Do you like the name container_interface? sequence_container_interface is more precise, but seems a bit long. - Would you use something like container_interface, but for associative containers? If so, should it assume a node-based interface, a la std::map and std::set? This assumption would preclude alternative associative container-like types, such as flat_map. Code: https://github.com/tzlaine/stl_interfaces Docs: https://tzlaine.github.io/stl_interfaces/doc/html/index.html Thanks, Barrett

9 15

Re: [boost] [config][build] Doc missing in 1.72
by Glen Fernandes 25 Dec '19

25 Dec '19

On 2019-12-24 Glen Fernandes wrote: > Yes. config.htm was a file in boostorg/config until recently. > > Now that it has been removed, meta/libraries.json's documentation > entry needs to be updated: > https://github.com/boostorg/config/blob/develop/meta/libraries.json#L5 > > From "config.htm" to "doc/html/index.html". > > Glen Fixed on develop: https://www.boost.org/doc/libs/develop/libs/libraries.htm (The Config link now goes to the Config documentation). Glen

4 4

Merry Christmas All...
by Ggh 25 Dec '19

25 Dec '19

Hi, Merry christmas to all of you. Happy holidays Cheers Greg Tell me, and I forget. Ask me, and I discover...

1 0