March 2024 - Boost - lists.boost.org

CMake Announcement from Boost Steering Committee
by Jon Kalb 13 Aug '24

13 Aug '24

The libraries produced by the Boost community have had a greater impact on the way that the C++ community writes code than any other library implementation. The focus of the Boost community will always be on the libraries, but it is undeniable that we are dependent on and often limited by the infrastructure of our trade. Years ago, the move to Git was contentious; yet, it was required to improve development. In a similar vein our build system has become an impediment for many developers and users, existing and prospective. Therefore, we, the Steering Committee, announce to the Boost community our desire and intent to move Boost’s build system to CMake for users and developers alike. We are soliciting comments and proposals from the community to guide the process and the goals. Our desire is that the community can come to consensus by the end of the calendar year with a vision of supporting users and developers. We understand that the actual process of achieving the end goal will be long, time consuming, and not without its share of conflict. We also recognize that the Boost community is comprised of bright and passionate individuals that are eager to get involved and help get work done. The members of the Steering Committee have been encouraged by the discussions and activity surrounding CMake on the mailing lists over the years and know that many people have voiced visions. We hope that each of you rejoins the discussion to support this initiative and contributes to the common goal of improving Boost’s integration into the broader C++ ecosystem. For the Boost Steering Committee, Jon Kalb, Chair jonkalb(a)boost.org

49 200

Boost Governance?
by René Ferdinand Rivera Morell 10 Aug '24

10 Aug '24

A disclaimer: I write this solely as a Boost Library author. And not in any other capacity or representing any other interest. It's now been at least a year since Boost switched from the Software Freedom Conservancy to the Boost Foundation for its governance organization. But have people noticed any difference? Did you know that switch happened? Did you know that they held an election for the Board of Directors and for the Officers? Do you know when that election happened? Do you know who got elected? Do you know how they were selected? Do you know what their responsibilities are? Do you know what their bylaws are? Do you know their financials? More importantly: Did you answer "no" to any of those questions? As a library author, I can say I definitely answered no to many of those questions. This is a problem. As authors, without asking, we should know those answers from the organization that governs our work. We should have input into how that organization governs. In other words, we deserve open and transparent governance; not the closed and opaque status quo. -- -- René Ferdinand Rivera Morell -- Don't Assume Anything -- No Supone Nada -- Robot Dreams - http://robot-dreams.net

10 10

Paul Bristow
by John Maddock 09 Aug '24

09 Aug '24

I've just heard that Paul Bristow who helped so much with the development of Boost.Math and indeed many other libraries, passed away peacefully last week. RIP Paul. Much missed. John.

7 7

boost::any_cast gives build errors with VS2022, boost v1.82 and C++17
by Bhuyan, Jyotideep 01 Jul '24

01 Jul '24

Hi, I was using VS2019, boost v1.78, and C++14 version and the below code was working well. Same code gives build error with VS2022, boost v1.82, and C++17 due to "o << *boost::any_cast<T>(&a); " Instruction. I wanted to know why it behaves differently. Code : class any_out { struct streamer { virtual void print(std::ostream& o, const boost::any& a) = 0; virtual streamer* clone() = 0; virtual ~streamer() {} }; public: any_out() : m_streamer(nullptr) { } ~any_out() { delete m_streamer; } template <typename T> any_out(const T& value) : m_streamer(new streamer_imp<T>), m_object(value) { } any_out(const any_out& a) : m_streamer(a.m_streamer ? a.m_streamer->clone() : nullptr), m_object(a.m_object) { } template <typename T> any_out& operator=(const T& r) { any_out(r).swap(*this); return *this; } any_out& operator=(const any_out& r) { any_out(r).swap(*this); return *this; } any_out& swap(any_out& r) noexcept { std::swap(m_streamer, r.m_streamer); std::swap(m_object, r.m_object); return *this; } friend std::ostream& operator<<(std::ostream& o, const any_out& a) { if(a.m_streamer) { a.m_streamer->print(o, a.m_object); } return o; } boost::any& get() { return m_object; } const boost::any get()const { return m_object; } bool empty() const { return m_object.empty(); } private: template <typename T> struct streamer_imp : public streamer { virtual void print(std::ostream& o, const boost::any& a) { try { if (a.empty()) { o << "<empty>"; } else { o << *boost::any_cast<T>(&a); } } } virtual streamer* clone() { return new streamer_imp<T>(); } }; // Members streamer* m_streamer; boost::any m_object; }; I have migrated to VS2022, boost v1.82, and C++17, and due to a build error, I have changed the code below. virtual void print(std::ostream& o, const boost::any& a) { try { if (a.empty()) { o << "<empty>"; } else { o << boost::any_cast<T*>(a); } } } any_out anyTest; anyTest = 100; std::string actualStr; actualStr = make_string() << anyTest; actualStr prints nullptr (0000000) instated of value 100 for VS2022, boost v1.82 and C++17 Best Regards, Jyotideep (JD) Please be advised that this email may contain confidential information. If you are not the intended recipient, please notify us by email by replying to the sender and delete this message. The sender disclaims that the content of this email constitutes an offer to enter into, or the acceptance of, any agreement; provided that the foregoing does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment. Confidential - Company Proprietary

4 7

GSOC '24 at Boost
by David Bellot 05 May '24

05 May '24

Hi all, Another year, another GSOC's coming! As you all know now, Inbal is in charge of managing our GSOC program at Boost. Over the past years, I had the pleasure to work with many of you and we had the chance to have many great students and mentors. This year, however, it seems we don't have enough mentors yet. I know it's just the beginning of the year, but I would like to encourage you to join this program as a mentor, and help students to participate in Boost and become great C++ developers. It's a very rewarding journey I took myself years ago and you will learn so much, both on the technical and human side. If you want to become a mentor, just add your name to this shared spreadsheet: https://docs.google.com/spreadsheets/d/1_eUWRsXnhi_JwKZbHZsGQf3WNUESsAPE4lV… Cheers, David

4 3

A base64 library?
by Ruben Perez 17 Apr '24

17 Apr '24

Hi all, I've been thinking of writing a base64 encoder/decoder library for some time. I first found the need when writing ServerTech chat (https://github.com/anarthal/servertech-chat) and I couldn't find a library that suited my needs. All the libraries I could find were either forgotten one-day projects with no tests, or private parts of something bigger. >From this issue from Beast (https://github.com/boostorg/beast/issues/1710) it looks like this could be useful to people. My idea would be writing something that is: * Boost quality - extensive testing and fuzzing. * Configurable. My use case in ServerTech required me to not output padding chars, for instance. * Support for a streaming API. * Support for calling in a constexpr context. * I'd prefer to focus on doing base64 only and doing it well, rather than targeting arbitrary bases. I don't have any sample code yet. Following our recommendations, I'm only determining interest. My questions are: * Do you think a library like this could be useful to the C++ community? * If the answer to the above is yes, do you think it could belong to Boost, or would be better as a standalone library? Regards, Ruben.

13 30

Technical Excellence?
by Vinnie Falco 12 Apr '24

12 Apr '24

I guess I'm confused. My understanding is that libraries are considered good candidates for the Boost collection based on meeting some or all of certain criteria: * They offer useful, novel functionality not found elsewhere * The API is superior to other libraries that do similar things * The implementation is exceptionally performant * Solving a familiar problem in a particularly elegant fashion * The library is already popular and has field experience * The library offers C++ standard functionality for older compilers But some of the chatter on the mailing list suggests that the bar for a Boost library candidate is lower. That a library just needs to basically work, even if it duplicates functionality found elsewhere, or even if it does not have anything that one might hold up as an example of exceptional engineering. Boost libraries used to be cutting edge, to such an extent that they were adopted into the C++ Standard. And now the progress is in reverse. The Standard introduces a new component, and the Boost library follows (Boost.Charconv for example). In other cases I see libraries with few to no users limping into reviews, or absent discussions which question whether or not the bar for excellence is exceeded. When I used to participate in wg21 I complained about the "direct to standard" pipeline, where people would just write papers for the sake of it with no example code or real-world user experience. I have to wonder if we are not cultivating a "direct to Boost" pipeline by having relaxed or poorly-defined acceptance criteria. There are thousands of open-source libraries for doing things in a fashion that is "good enough." If libraries are not held to technical excellence and high standards during the review process then what is the value proposition of the collection? If libraries of average design and implementation are seen as passable for acceptance then how would this inspire any authors to strive for excellence? When I write a library there are always two factors in my mind: 1. that the use-case is compelling, and 2. that I can bring something to the table which demonstrates technical excellence. These are the libraries that I have contributed thus far and my process for designing them: 1. Boost.Beast This offers something never seen before which is a generic approach to HTTP and Websocket, based on Asio, which offers models and algorithms that are designed well (of course, it still has its flaws). The library already had many users ahead of the review, and was being used to transact economic value in a live product. I will note that my initial motivation for Beast was because the websocketpp library API was just terrible, and the alternatives even worse. 2. Boost.JSON When I needed JSON I looked at the alternatives and while RapidJSON was clearly the best in terms of performance I felt that it made several major design flaws in its API. Boost.JSON pretty much copies all of the good ideas from RapidJSON especially the performant implementation, and offers a redesigned API that follows C++ best practices with respect to copy and move, exceptions, and error codes. Furthermore I added the streaming parser and I introduced a novel means of managing memory resources which I believe corrects a design flaw in the standard. This library already had commercial users and lots of feedback before going into review. 3. Boost.URL Beast users regularly asked for URL parsing. There are some regex patterns floating around and some Spirit based parsers, and also some URL libraries that do the "five std::string data members" thing. I wanted something excellent, but the first two iterations of an API turned out to be crap and I gave up, as I do not like publishing mediocre libraries. Some time passed and with renewed energy I tried again and then I got it right. The URL is stored in its serialized form (just one string), allowing the possibility for having a url_view type in addition to the mutable container. I copied much of the API from a popular JS URL lib because, well hey why duplicate the effort if someone has already gone through the trouble :) Boost.URL offers particularly clean and robust interfaces for reading and modifying the values of each part of the URL both with and without the URL-encoding applied. The mechanism for lazily iterating the path and query sequences is novel. And it offers a strong invariant: the container will always contain a valid URL. The library further innovates by making public its parsing framework which is optimized for the type of grammars found in the Internet RFCs such as HTTP and the fields used in Websocket handshakes. Boost.URL had a bunch of users before the review was conducted. 4. Boost.StaticString This one is just a straightforward string container whose storage is fixed in capacity as a data member. Container libraries are often unexciting but they are necessary. StaticString follows all best practices for modern C++ containers. When I look at a proposed library I try to figure out what is great about it, how well it performs for its users (or even, does it have any users?), what part of the API is exceptionally well designed and ergonomic, but most importantly I want to ask: what makes this library stand out to the extent that it should be part of the library collection? What aspects of the library, if viewed by someone learning C++ or interested in improving their design skills, are inspirational? Is this overly demanding or exclusionary? Am I overthinking things? Should we be asking more of these types of questions and requiring better answers? What is the criteria for determining if a library is good enough to become part of the collection? Thanks

26 78

Fwd: A proposal for a modern build-system
by Daniele Lupo 11 Apr '24

11 Apr '24

On 23/03/2024 13:16, Hassan Sajjad wrote: > Hi. > > Could you please confirm if my proposal is under consideration? If so, > when can I expect an update regarding its status? > > Sorry for the delay, I had personal issues during those days. I've read the thread, and since now I can't see any serious issue or problem that make me think that the actual build system must be replaced. Maybe updated, but not replaced. For explaining more in detail my point of view (that, I will not ever repeat too many times, it's my personal one, so other people can have other ideas about it): - Boost does not pay people (as far as I know). You're asking for compensation in the first message, but nodoby will pay it, and nodoby asked for it. - I agree with others that three month of development are a bit too optimistic, and also in this case we must maintain two different build systems instead that one. - In the thread I've read many messages like "b2 can do this", "well, also hmake", but no messages like "hmake can do it and b2 it's not able to do it" "oh really? I'd love to have it!". I don't see any important use case that's requested by the community and that hmake will provide while b2 not. So the community wil use hmake to do the same things that at the moment it does with b2. - There's already another build system, even if not much official, and that's cmake. It works well and it's widely used, and that's supported by many package managers, like vcpkg. I have to say that hmake will not be used by them, so it will be limited to the scope of build boost like b2 actually does. Even in this case, it does not add anything. Basically, in the entire thread, in my opinion, there's not a single point that le me think that hmake will make the like easier to boost community. At most we'll have another tool that make the same things. And, repeating myself, I can see that new features actually not supported by b2, pratically modules, are easier to be implemented in b2 instead of using another build system and obligate the entire community to learn another tool for a feature that for now only a few of them will use. In addition to this, I strongly think that instead of a new build system I'll spend some effort, if necessary, in improving existing alternatives, like cmake, that are already widely used by the developer community around the world. Regards Daniele Lupo

4 6

Interest in a library for type-safe bitwise operations?
by tobi＠die-loews.de 06 Apr '24

06 Apr '24

Hi, I would like to gauge interest in a library that makes the usage of flag-like enumerations safer. The library is called Boost.Flags, and its key features are - provides type-safe bitwise operations for flag-like scoped / unscoped enumerations - turns undetected logical errors into type errors Further characteristics are - non-intrusive - only a function overload or a template specialization required to opt-in - single header-file library - no dependencies (only standard-library includes) - everything is constexpr - zero-overhead in optimized builds - requires at least C++11, uses newer features if available From the Boost.Flags documentation: > Why do we use the bits of integer types for Boolean options? > > - easy to define, e.g. as macros, integer constants or enumerators > - language support for setting and querying through bitwise operators > - compact representation in memory > - simple bulk transfer in interfaces (on many platforms an int can > hold up to 32 different Boolean options) > - enforces the usage of names, especially to prevent bool parameters > in interfaces: > - "Boolean arguments loudly declare that the function does more than > one thing. They are confusing and should be eliminated." [C. Martin, > Clean Code] But C++ already has everything to work with integer-based flags, so why do we need Boost.Flags? The answer is type-safety! With integer-based flags we can do too much. E.g. when there are multiple different integer-based flag sets, nothing prevents the programmer from accidentally mixing flags from unrelated flag-sets. And of course, there are problems with the bitwise negation operator~. If you want to know, what possibly could go wrong, read the docs. The Github page: https://github.com/tobias-loew/flags The online docs: https://tobias-loew.github.io/flags Example on Godbolt: https://godbolt.org/z/qbojncnd7 I am looking forward to your comments! Tobias

5 11

[release] Master branch is now open for bug fixes
by Marshall Clow 01 Apr '24

01 Apr '24

The master branch is now open for bug fixes, test and documentation changes. Other changes by release manager permission, as described in https://github.com/boostorg/wiki/wiki/Releases%3A-Beta-Merge-Policy The next deadline: On April 3rd, master closes for all changes. As always, the calendar is at https://www.boost.org/development/ — Marshall

12 22