- Boost - lists.boost.org

Delayed response for sleep function
by Daggumati, Rajesh 21 Jun '22

21 Jun '22

Hi Team, When I use boost sleep function, I am getting delayed response. How to overcome this issue. Is there any alternative for this? boost::posix_time::ptime t1 = boost::posix_time::microsec_clock::local_time(); boost::this_thread::sleep(boost::posix_time::millisec(10000)); boost::posix_time::ptime t2 = boost::posix_time::microsec_clock::local_time(); boost::this_thread::sleep(boost::posix_time::millisec(10000)); boost::posix_time::ptime t3 = boost::posix_time::microsec_clock::local_time(); boost::posix_time::time_duration diff = t2 - t1; std::cout << diff.total_milliseconds() << std::endl; boost::posix_time::time_duration diff1 = t3 - t2; std::cout << diff1.total_milliseconds() << std::endl; output is : 10005 10006 Expected ouput should be 10000 and 10000 Regards, Rajesh D Please be advised that this email may contain confidential information. If you are not the intended recipient, please notify us by email by replying to the sender and delete this message. The sender disclaims that the content of this email constitutes an offer to enter into, or the acceptance of, any agreement; provided that the foregoing does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment.

6 8

Re: [boost] Delayed response for sleep function
by William Linkmeyer 21 Jun '22

21 Jun '22

This is interesting and helpful — yes! Although, it sounds like it’s more pertinent to software timers, right? I’ve done some work with hardware RTCs, many of which drift by 4ms/day, others by a few ms/year. (For physical quartz clocks, drift is a function of temperature and crystal frequency.) I had assumed that these clocks were more-or-less ubiquitous on computers today. Anyway, best regards and thank you for your detailed response. WL > On Jun 21, 2022, at 4:12 AM, Neil Groves <neilgroves(a)gmail.com> wrote: >

2 2

Re: [boost] [Boost-users] Boost Twitter is Blowing Up!!!
by Vinnie Falco 21 Jun '22

21 Jun '22

On Mon, Jun 20, 2022 at 7:48 PM 😉 Good Guy 😉 via Boost-users <boost-users(a)lists.boost.org> wrote: > The problem with Twitter is that it requires an account to read the posts. Yeah, so... my assumption when I made this post is that most folks have a Twitter account. I see that is not the case, even for long-time Boost authors. If you don't already have a Twitter account, there is not going to be much benefit to creating one just to like, follow, and retweet the Boost account, as you will have no followers and thus no reach. Although you might consider creating an account if you want to become more involved in C++ Twitter in general. That said, Twitter and the other socials might not be important to the senior engineers, authors, and maintainers here but collectively, Boost needs to catch up in terms of courting the younger generations of developers. We need fresh blood for library submissions, reviewers, and review managers. Our efforts on social media are aligned with this goal. Thanks

2 3

[JSON] Vote for Boost.JSON in this poll!
by Vinnie Falco 21 Jun '22

21 Jun '22

There's an online poll asking about which JSON library you use. If you use Boost.JSON consider voting for it: <https://meetingcpp.com/mcpp/survey/?q=2> Also, consider voting for it if you _don't_ use Boost.JSON, but you want to. -- Regards, Vinnie Follow me on GitHub: https://github.com/vinniefalco

1 0

Boost Twitter is Blowing Up!!!
by Vinnie Falco 21 Jun '22

21 Jun '22

Greetings fellow users, library authors, maintainers, review wizards, release wizards, and Boost Foundation Board members! As part of our ongoing effort to continue the revitalization of Boost, a handful of us have taken the reins to post about Boost on social media. We have postings on Reddit and Hacker news, blog posts about the new efforts in Boost.Unordered, and new tweets. However, we could use your help! Right now the Boost Twitter account has a measly 957 followers. It would be great to increase our reach, so I'm asking everyone if they could be so kind as to Follow the official Boost Twitter account here: <https://twitter.com/Boost_Libraries> and then amplify our messages by Liking and Retweeting. Starting with this pinned tweet, which everyone will see when they visit the Boost Libraries Twittter profile page: <https://twitter.com/Boost_Libraries/status/1539003321939202048> Following the Boost Twitter account will give you up-to-date information about what is going on with Boost, including articles and mentions on other social media sites. Here is what we have so far: <https://www.reddit.com/r/cpp/comments/vfdcrz/advancing_the_state_of_the_art…> <https://www.reddit.com/r/cpp/comments/vbdr3z/new_boostunordered_containers_…> <https://twitter.com/hackernewstop10/status/1538622706035343364> <https://news.ycombinator.com/item?id=31801814> To summarize, engaging with Boost related content on social media will enhance our profile - any help is appreciated! -- Regards, Vinnie Follow me on GitHub: https://github.com/vinniefalco

2 1

[thread] upgrade_to_unique_lock takes a upgrade_lock, not an upgrade_mutex
by Phil Endecott 20 Jun '22

20 Jun '22

Dear Experts, boost::upgrade_mutex m; void f() { boost::upgrade_lock l(m); // read shared state g(); } void g() { // precondition: upgrade lock held. boost::upgrade_to_unique_lock l(m); // write shared state } But that's not how it works. The upgrade_to_unique_lock takes the upgrade_lock as its ctor parameter, not the mutex. Is there a good reason for that? I think all that upgrade_to_unique_lock needs to do is to call m.unlock_upgrade_and_lock() in its ctor and m.unlock_and_lock_upgrade() in its dotr, i.e. it doesn't need to access any state in the upgrade_lock. Am I missing something? Regards, Phil.

3 4

multiprecision/gmp.hpp
by Gero Peterhoff 17 Jun '22

17 Jun '22

Hello John, if i include boost::cstdint/float.hpp AND boost::multiprecision::gmp.hpp gets errors in boost::multiprecision::detail::float128_functions.hpp. With the attached patch it works, although I have no idea why this is needed. regards Gero

2 1

[Boost] [Review] [Boost.MySQL] - Review Complete
by Richard Hodges 16 Jun '22

16 Jun '22

Dear All, The submission of Boost.MySQL has created plenty of "lively debate". Unsurprisingly, a library which is based on Asio, of which there are few experts, has given rise to a great deal of questioning around performance, memory re-use, correct return types and so on. It has been noted that Reuben, the library's author, has been very responsive. Both in this mailing list and in terms of raising PRs. A specific concern was raised about the name of the library, and whether it infringed any commercial trade marks. Reuben took the trouble to reach out to Oracle to check. They have responded that there is no infringement and we may use the name. In the end though, despite a great deal of words written raising concerns, ideas and suggestions, we received size reviews, all of which were high quality. The results were: Accept: 3 Conditional Accept: 2 Reject: 1 Having carefully weighed up: - The stated aims of the library - The quality of the implementation - The demonstrated responsiveness of the author - The value of the library to users of MySQL - The value of the library as a teaching tool for implementing a complex, cancellable, asynchronous protocol on ASIO, which correctly adapts to the use of user-selection completion tokens, It seems right to ACCEPT this library into Boost. My congratulations to Reuben. -- Richard Hodges hodges.r(a)gmail.com office: +44 2032 898 513 home: +376 861 195 mobile: +376 380 212

5 5

The deadline for new libraries and breaking changes in Boost 1.80.0 is June 22
by Glen Fernandes 16 Jun '22

16 Jun '22

2022-06-22 closed for new libraries and breaking changes in Boost 1.80. See https://www.boost.org/development/index.html for the full calendar. - The Release Managers

1 0

Boost.MySQL naming
by Ruben Perez 14 Jun '22

14 Jun '22

Hi all, We have received an answer from Oracle's legal team, thanks to Norvald, who initially wrote in this ML and works for Oracle. TL;DR: Boost.MySQL keeps its name. > Naming the library as proposed (Boost.MySQL) is not a problem for a > community connector to MySQL. This is consistent with other naming we > see in the MySQL community and in our experience it has not caused > confusion. We would be concerned about any naming or statements that > suggest an inaccurate association between your library or product and > MySQL, but that does not appear to be the case. So I'm afraid we won't be having Boost.OurSQL anytime soon. Regards, Ruben.

1 0