- Boost - lists.boost.org

RE: [boost] Re: Re: Boost Mathematicians
by Hurd, Matthew 03 Jun '04

03 Jun '04

> Behalf Of Thorsten Ottosen > Sent: Thursday, 3 June 2004 4:25 PM > > > "Reid Sweatman" <drunkardswalk(a)earthlink.net> wrote in message > > | Oddly enough, scientists is usually pretty > | conservative folk; they like what they know. > > Is that so odd? Yesterday I talked with a matematician here in Sydney about > Fortran. > He uses Fortran because it is good enough for what he is doing. It would > probably take quite some > time for him to learn C++, so why should he? > > br > > Thorsten There is an often seen misconception that C/C++ should be as fast as it gets as the programming model is close to the instruction model of the machine. In practice FORTRAN is usually faster. At one level, in C++ this slowness this is usually because of temporaries and expression templates and modern optimizing compilers can often mitigate this for typical math calcs. Other abstraction penalties apply. Another level is the fundamental differences in aliasing between the language definitions. FORTRAN as a language does not allow aliasing ambiguities which makes the optimizers job a lot easier and the code can be a lot faster. C/C++ assumes aliasing potential which makes optimizing very hard. A C/C++ compiler may allow aliasing to be disabled for a section of code or for the whole program, but you need to be confident in what you are doing. Very clever global analysis is needed to cure the aliasing problem, and given the potential for run time gymnastics, it may not be possible at all. Have a look at these benchmarks judging Todd V's blitz to FORTRAN: http://www.oonumerics.org/blitz/benchmarks/ Boost's equivalent to Blitz++ is uBLAs. More discussion on C++ versus FORTRAN speed can be found here: http://osl.iu.edu/~tveldhui/papers/iscope97/ I do think it is worthwhile writing C++ to do this stuff as the abstraction is much better for the library client IMO. At some levels the implementation may be tougher for the library writer, as some of the optimizer gymnastics ends up in the expression templates, but given the right framework it may be simply extensible and suitable for even relatively unsophisticated mathematicians to contribute library components. You still need to wrap as you can't hope, nor should you try, to offer all algorithms from all languages. Another lobbed $0.005, Matt Hurd. _______________ Matt Hurd +61.2.8226.5029 hurdm(a)sig.com Susquehanna Sydney _______________ IMPORTANT: The information contained in this email and/or its attachments is confidential. If you are not the intended recipient, please notify the sender immediately by reply and immediately delete this message and all its attachments. Any review, use, reproduction, disclosure or dissemination of this message or any attachment by an unintended recipient is strictly prohibited. Neither this message nor any attachment is intended as or should be construed as an offer, solicitation or recommendation to buy or sell any security or other financial instrument. Neither the sender, his or her employer nor any of their respective affiliates makes any warranties as to the completeness or accuracy of any of the information contained herein or that this message or any of its attachments is free of viruses.

2 1

[test] [minmax] failure on gcc 2.95
by Vladimir Prus 03 Jun '04

03 Jun '04

As shown in http://tinyurl.com/3xdyq, Boost.Test fails to build on gcc 2.95 with stlport. The error message is: /boost/head-regression/boost/boost/minmax.hpp: In function `const size_t & boost::std_min<size_t>(const size_t &, const size_t &)': /boost/head-regression/boost/libs/test/build/../src/test_tools.cpp:375: instantiated from here /boost/head-regression/boost/boost/minmax.hpp:26: `min' undeclared (first use this function) Is it possible that authors of either Boost.Test or boost/minmax.hpp take care of this error? Thanks, Volodya

1 0

Borland settings different between Boost and IDE ?
by Nicola Musatti 03 Jun '04

03 Jun '04

Hallo, is it possible that Boost libraries use a different setting for enum handling than the BCB IDE default one? I'm having problems which seem related to enums and the inclusion of some Boost headers in precompiled headers. Cheers, Nicola Musatti

2 2

[program_options] Darwin failure help?
by Vladimir Prus 03 Jun '04

03 Jun '04

The program options library now fails a single test on Darwin, with this output: ../libs/program_options/test/parsers_test.cpp(205): fatal error in "call_test_main": test p.options.size() == 1 failed *** 1 failure detected in test case "call_test_main" The code in question is: putenv("PO_TEST_FOO=1"); parsed_options p = parse_environment(desc, "PO_TEST_"); BOOST_REQUIRE(p.options.size() == 1); So, it seems that after "putenv", the string is is not available in the 'environ' variable. The variable is declared like this: #if defined(__APPLE__) && defined(__DYNAMIC__) #include <crt_externs.h> static char** environ = *_NSGetEnviron(); #else extern char** environ; #endif The Darwin-specific conditinal was sent by Michael LaSpina, so I don't know what it really does, and so don't know why the test fails. I'd appreciate any suggestions. Thanks in advance, Volodya

2 2

RE: [boost] Proposed Boost Library for Data Series Analysis
by Hurd, Matthew 03 Jun '04

03 Jun '04

> -----Original Message----- > Behalf Of Tom Brinkman > Subject: [boost] Proposed Boost Library for Data Series Analysis > > I placed a small tutorial and motivating example for > the proposed boost::data_series library. > > http://groups.yahoo.com/group/boost/files/data_series/ > > Working examples for you to criticize will be added > within the week. Cute code. Nice job. Efficiency is often paramount with these types of apps. Being able to do finite difference approaches, backwards and forwards, and in absolute terms is important (often you only want the latest data point). You have the incremental case covered in your notes. Being able to calculate it at a point in an absolute sense, optional caching of results, working with series of unknown lengths and accuracy / validity enabling would be nice too. By accuracy / validity enabling I mean, for say, your example of a 5 step moving average, it is not valid for the first four points as these are not an accurate average, so there is a length modification for the result. Another simple example would be an exponential moving average where the number of significant digits required will determine how far back you need to go in the series. At another level, quality of service for some functors, the fast or accurate spectrum, is often appropriate. Perhaps expression templates might help here. Compile time results for validity calcs for series of known lengths would be helpful where possible. It would be nice if the algorithms could be simply specified, similar to your approach, and then "mounted" into the appropriate framework. Perhaps SFINAE or another technique could be used to determine an algorithm's capabilities. That is, the framework could juggle the most appropriate methods to use based on the results required. E.g. use incremental if you can otherwise absolute. Based on what I've done the past you also end up wanting arbitrary n-dimensional structures with other data types flowing through as well. Being able to associate ids/names with data items and keeping them associated through sorting/ranking. E.g. tag the series with data codes, rank them, and you can get the code for the best. You also want grouping n dimensional constructs and splitting dimensions and "slicing" operators that operate across the current dimension, which, with the appropriate framework, are one in the same. E.g. choose the minimum or sum the results of a bunch of functions. Then soon you want to split the computation amongst processors and machines and you want treat the computation as a dataflow graph and parallelise it some way, which I did a few years ago with BGL's precursor the GGCL. A topological sort gets you most of the way there... Also, you can then use things like Metis to partition your computation graph in nice ways. I think a way approach it would be an expression template approach with some adaptability in terms of absolute and incremental analytics with some accuracy (at least something like the number of points being chewed up and not valid or some such). Everything else could come on top of this. You need to ensure that you can easily reuse code out there. No one wants to spend their life writing the zillions of numerical algorithms already out there. If you want a vector ARMA model, there are only a couple out there I think, and they are in FORTRAN, for example, wrap it, don't write it, I'd hope. You end up with run time versus compile time issues. People want to interact with this kind of stuff. However, my take on that now is do it at compile time and include the compiler as part of your interactive tools set if need be :-) Anyhow, it is nice to see a start on this. Good luck. $0.005, Matt Hurd. _______________ Matt Hurd +61.2.8226.5029 hurdm(a)sig.com Susquehanna _______________ IMPORTANT: The information contained in this email and/or its attachments is confidential. If you are not the intended recipient, please notify the sender immediately by reply and immediately delete this message and all its attachments. Any review, use, reproduction, disclosure or dissemination of this message or any attachment by an unintended recipient is strictly prohibited. Neither this message nor any attachment is intended as or should be construed as an offer, solicitation or recommendation to buy or sell any security or other financial instrument. Neither the sender, his or her employer nor any of their respective affiliates makes any warranties as to the completeness or accuracy of any of the information contained herein or that this message or any of its attachments is free of viruses.

1 0

Re:[boost] Re: Re: iostreams library review
by Robert Ramey 03 Jun '04

03 Jun '04

>> Question, have you tried to combine the streaming with boost >> serialization? > I think Robert Ramey has already done the work to combine serialization > with iostreams, since his archive types are constructible from arbitrary > streams -- that means it's already possible to create archives based on > streams from the iostreams library, e.g. memory-mapped file streams. > There may be other interactions I haven't considered. I've only read the > documentation; I haven't actually tried to use the serialization library > yet. The serialization library archives use streams and make no special assumptions regarding them. It works with all the streams I've happened to try. I will be taking a close look at the iostreams library proposal. In the course of implementing the serialization library I've had to become much more familiar with locales, facets, codecvt, element types, EOF, etc than I wanted to. Oh - and that fact that different versions of the standard library have myriad minor quirks that have to be considered. This was necessary in order to avoid dependence on the stream in the wrong way. I'm very interested in this but have come to the conclusion that there might be more here than meets the eye. - Of course that's why we have the review process. Robert Ramey

2 1

boost::optional - Include none.hpp instead of none_t.hpp?
by Schalk_Cronje＠NAI.com 02 Jun '04

02 Jun '04

Was it intentional to include none_t.hpp instead of none.hpp in boost/optional.hpp? Otherwise it seems that the user must resort to including boost/detail/none.hpp

3 3

thread, line endings
by Janusz Piwowarski 02 Jun '04

02 Jun '04

Hello In files: libs/thread/src/mutex.cpp libs/thread/src/recursive_mutex.cpp libs/thread/src/mutex.inl boost/thread/mutex.hpp boost/thread/recursive_mutex.hpp there is CR+CR+LF used as line separator. Also, in recursive_mutex constructor if defined(BOOST_HAS_WINTHREADS) m_critical_section should be initialized before m_count (it's compiler warning) Regards, Janusz

3 4

New utility at boost/detail/allocator.hpp
by Joaquín Mª López Muñoz 02 Jun '04

02 Jun '04

Hi all, As requested by some at the mailing list, I've migrated allocator.hpp from boost/multi_index/detail/ to boost/detail/ (with some obvious namespace changes.) I'd like to remark the following: * This allocator.hpp has nothing to do with a header of the same name who was sitting there and John Maddock kindly removed a few days ago. * The header provides some utilities to do rebinding of allocators even in MSVC++ 6.0 (where the std syntax for rebind does not work), and also exposes a tiny wrapper over defective std::allocators, providing some missing template members to make them std compliant. * I'd appreciate if those of you who were originally interested in using this header can do some sanity checks to make sure everything works for you (it does for Boost.MultiIndex). We have some room for improvements and fixes until Boost 1.32 is branched for release. Best, Joaquín M López Muñoz Telefónica, Investigación y Desarrollo

3 3

RE: [boost] Re: Re: BOOST_READONLY_PROPERTY macro
by Rozental, Gennadiy 02 Jun '04

02 Jun '04

> Can you just please tell me what BOOST_READONLY_PROPERTY ( > bool, (epv) ) > will become once it is preprocessed ? Something like this: class readonly_property123 : public boost::unit_test::readonly_property<bool> { typedef boost::unit_test::readonly_property<bool> base; friend class epv; // <-- here BOOST_PP is used typedef base::write_param_t write_param_t; public: readonly_property123() {} explicit readonly_property123( write_param_t init_v ) : base( init_v ) {} } > > P.S. Paul should know the answer > I don't think Paul knows about _all_ libraries that _use_ the > PP library. This has something to do with specific compiler bug in regards of PP.

1 0