Re: New failure with borland-tools.jam

From: David Abrahams (dave_at_[hidden])
Date: 2004-01-08 21:03:40

Beman Dawes <bdawes_at_[hidden]> writes:

> At 12:44 PM 1/8/2004, David Abrahams wrote:
> >Beman Dawes <bdawes_at_[hidden]> writes:
> >
> >> C:\boost\site\tools/build/v1\borland-tools.jam:182: in include-tools
> >> rule W32_GETREG unknown in module
> >> C:\boost\site\tools/build/v1\boost-base.jam:730: in relevant-features
> >> C:\boost\site\tools/build/v1\boost-base.jam:798: in select-properties
> >> C:\boost\site\tools/build/v1\boost-base.jam:769: in variant
> >> C:\boost\site\tools/build/v1\features.jam:110: in boost-build
> >> C:\boost\site\boost-build.jam:16: in module scope
> >>
> >> This turned up on this mornings Win32 tests. "borland cwpro8 gcc" are 
> run
> >
> >> in one group, and that run failed with the above message. The separate 
> run
> >
> >> with "intel-win32 msvc vc7 vc7.1" worked normally.
> >
> >You need an updated bjam.
>
> Hum... That has bitten me in the past. I guess I could just rebuild it 
> before every regression test run. Is there a way to use bjam so that the 
> build only gets done if necessary? I don't see a Jamfile for bjam
> itself.

It's called build.jam.

jam -fbuild.jam
>
> Anyway, thanks, Borland is running fine now.

Yerwelcome.

-- 
Dave Abrahams
Boost Consulting
www.boost-consulting.com