Re: [Boost-build] boost for arm embedded system

Subject: Re: [Boost-build] boost for arm embedded system
From: David C Liebman (david.c.liebman_at_[hidden])
Date: 2011-02-19 09:58:28

On 02/19/2011 07:37 AM, Jürgen Hunold wrote:
> Hi David,
>
> On Saturday, 19. February 2011 13:09:37 David C Liebman wrote:
>> this is my user-config.jam :
>>
>> using gcc : 4.5.1 :
>> /home/dave/bin/sourcery/bin/arm-none-linux-gnueabi-g++ ;
>>
>> this is my command line:
>>
>> ./bjam --toolset=arm-none-linux-gnueabi-g++
>> --prefix=/home/dave/workspace/urbi_arm_source/boost_1_45_0/_build
>> --debug-configuration install
>
> This should be
>
> ./bjam toolset=gcc-arm-none-linux-gnueabi-g++ ...
>
> because this is only a special gcc version. And no "--" on toolset. You should
> even be able to omit "toolset=" and just invoke bjam gcc-arm-none-linux-
> gnueabi-g++
>
> Yours,
>
> Jürgen

I still get this:

...clip...
notice: [cmdline-cfg] toolset arm-none-linux-gnueabi-g++ not previously 
configured; attempting to auto-configure now
/home/dave/workspace/urbi_arm_source/boost_1_45_0/tools/build/v2/build/toolset.jam:38: 
in toolset.using
rule arm.init unknown in module toolset.
/home/dave/workspace/urbi_arm_source/boost_1_45_0/tools/build/v2/build-system.jam:481: 
in process-explicit-toolset-requests
/home/dave/workspace/urbi_arm_source/boost_1_45_0/tools/build/v2/build-system.jam:561: 
in load
/home/dave/workspace/urbi_arm_source/boost_1_45_0/tools/build/v2/kernel/modules.jam:283: 
in import
/home/dave/workspace/urbi_arm_source/boost_1_45_0/tools/build/v2/kernel/bootstrap.jam:142: 
in boost-build
/home/dave/workspace/urbi_arm_source/boost_1_45_0/boost-build.jam:17: in 
module scope
...end clip...