[Boost-build] Fwd: Re: [C++-sig] Boost 1.69 python3 module

Subject: [Boost-build] Fwd: Re: [C++-sig] Boost 1.69 python3 module
From: Alex Biddulph (c3124185_at_[hidden])
Date: 2019-02-08 01:04:30

-------- Forwarded Message --------
Subject:        Re: [C++-sig] [Boost-build] Boost 1.69 python3 module
Date:   Thu, 7 Feb 2019 22:55:22 +0000
From:   Alex Biddulph <c3124185_at_[hidden]><mailto:c3124185_at_[hidden]>
Reply-To:       c3124185_at_[hidden]<mailto:c3124185_at_[hidden]>, Development of Python/C++ integration <cplusplus-sig_at_[hidden]><mailto:cplusplus-sig_at_[hidden]>
To:     cplusplus-sig_at_[hidden]<mailto:cplusplus-sig_at_[hidden]> <cplusplus-sig_at_[hidden]><mailto:cplusplus-sig_at_[hidden]>

> It looks like python was built in that run.
> I also noticed:
>   project-config.jam:33: syntax error at EOF
> which didn't appear in the previous log.
> In addition, the new log shows configuration
> of python 2.7 instead of python 3.6.

It did indeed appear to build the python library in that case (although I missed a semicolon so it built python27 instead of python36).

I corrected my error (also scrubbing the build folder again), and this time it correctly built and installed the python36 library.
Here is the link to the output for this build
https://drive.google.com/open?id=1UHzlwMfAlXlOEghqIFH41jnBlfPNAH51

So I went back to building everything (I left the --debug-building option on) and once again, it built everything but the python36 library. Here is the link to the build output for this build
https://drive.google.com/open?id=14m9Jrwz8imrEi90HGkkmglVKEI3v6FHH

On 7/2/19 10:21 am, Alexander Biddulph wrote:

OK, I scrubbed the build folder and ran again. Here is a link to the output with -d2 --debug-configuration --with-python --debug-building on the command line (in that order)
https://drive.google.com/open?id=1hINO1jHr5ikkVQ4o3EDexGGhhtpy2RTe

On 7/2/19 4:26 am, stefan wrote:

Alexander,

I'm replying by re-adding some addresses, just so you don't miss Steven's reply below. Can you please try that and report back what you get ?

On 2019-02-06 12:13 p.m., Steven Watanabe via Boost-build wrote:

AMDG

On 2/6/19 7:22 AM, stefan via Boost-build wrote:

On 2019-02-04 8:54 p.m., Alexander Biddulph wrote:

Hi,

Finally managed to get around to rebuilding this with "-d2" added to
the command line. Here is a link to the build output
https://drive.google.com/open?id=1tlwj3-uGd6wsZ5qJcrD4Ms4RbaVMbDmC

As before, everything seems to be built and installed, except for the
python library.
As before, Boost.Build seems to find the python installation and says
it is going to build the python library, but just doesn't seem to get
around to doing it and there don't appear to be any errors that the
build system encountered.

I don't see anything obvious either. Steve, can you help with this ?

Try `--with-python --debug-building`  (--debug-building
generates way too much output if you build everything)
I suspect that you'll see "<build>no in common properties"
My best guess is that the problem is in python.require-py.
Maybe run under the debugger and set a breakpoint there.

In Christ,
Steven Watanabe
_______________________________________________
Unsubscribe & other changes: https://lists.boost.org/mailman/listinfo.cgi/boost-build

[Stefan]

--
      ...ich hab' noch einen Koffer in Berlin...
_______________________________________________
Cplusplus-sig mailing list
Cplusplus-sig_at_[hidden]<mailto:Cplusplus-sig_at_[hidden]>
https://mail.python.org/mailman/listinfo/cplusplus-sig