Re: [Boost-testing] Boost 1.34.0 results not getting uploaded on the metacomm page

From: Madhav, Abhijith (STSD) (abhijith.madhav_at_[hidden])
Date: 2007-06-13 05:36:51

>> I'm running boost 1.34.0 on a HP-UX PA-RISC box. However the results
>> aren't getting uploaded on the metacomm page.
>>
>> In the ftp site I find that the corressponding zip file tarnsferred
by
>> the regression.py script to be very small compared to the other
files.
>>
>> "
>> -rwxrwxrwx 1 owner group 384 Jun 4 4:52 HP-UX aCC
>> PA-RISC.zip
>> "
>>
>> Probably this is the reason why the results are not getting updated.
>
>Yes. In fact, the XML inside the archive is as short as this:
>
><?xml version="1.0" encoding="iso-8859-1"?>
><test-run source="tarball" runner="HP-UX aCC PA-RISC"
timestamp="2007-06-02T00:34:43Z" platform="HP-UX" tag="RC_1_34_0"
run-type="full">
><comment>&lt;p&gt;HP-UX B.11.11 PA-RISC with aCC: HP ANSI C++ B3910B
A.03.76 [+hpxstd98 (beta)]&lt;/p&gt;</comment>
></test-run>
>
>IOW, it does not contain any test results entries.
>
>> Any pointers as to why this is happening would be helpful.
>
>My guess would be that for some reason regression.py fails to collect
>test logs, but it's hard to say for sure without more data. Could you
>post the regression.py's log corresponding to these results?

I've attached the logs of regression.py. I now suspect that the xml file
may not be getting created properly because of me using an old
'process_jam_log'. This binary was actually the one built using
boost-1.32.0 sources. I'll try building a new 'process_jam_log'

Thanks,
Abhijith