Re: [Boost-testing] Boost 1.34.0 results not getting uploaded onthe metacomm page

From: Madhav, Abhijith (STSD) (abhijith.madhav_at_[hidden])
Date: 2007-06-15 04:32:12

. I've now run the tests using a 1.34.0 sources built 'process_jam_log'.
. I've verified that the <runner-id>.xml has been created correctly and
has 
  also been updated correctly in
ftp://fx.meta-comm.com/boost_regression. 
. But I still don't see the results in
http://engineering.meta-comm.com/boost-regression/CVS-HEAD/developer/.
Am I missing something else 
  to do or should I just wait considering that the tests were completed
only yesterday.
. Also I've attached the log of regression.py just in case. It seems to
say that everything is fine and dandy.

-Abhijith

-----Original Message-----
From: boost-testing-bounces_at_[hidden]
[mailto:boost-testing-bounces_at_[hidden]] On Behalf Of Aleksey
Gurtovoy
Sent: Wednesday, June 13, 2007 4:30 PM
To: Running Boost regression tests
Subject: Re: [Boost-testing] Boost 1.34.0 results not getting uploaded
onthe metacomm page

Madhav, Abhijith (STSD) writes:
> I've attached the logs of regression.py. I now suspect that the xml
file
> may not be getting created properly because of me using an old
> 'process_jam_log'. This binary was actually the one built using
> boost-1.32.0 sources. 

Oh, that explains it. 1.34 most definitely requires up-to-date
'process_jam_log'.

-- 
Aleksey Gurtovoy
MetaCommunications Engineering
_______________________________________________
Boost-Testing mailing list
Boost-Testing_at_[hidden]
http://lists.boost.org/mailman/listinfo.cgi/boost-testing