Re: [Boost-users] Building Boost on Solaris 10.

From: MOSS Sebastian (Sebastian.MOSS_at_[hidden])
Date: 2007-07-12 15:14:05

Hi Sabyasachi,

Perhaps you can try the advice here:
http://archives.free.net.ph/message/20070621.030448.60c7c5c8.en.html

Basically it involves building bjam with sunpro toolset, then specifying
using this bjam and sun toolset in the build.

HTH,
s 

-----Original Message-----
From: boost-users-bounces_at_[hidden]
[mailto:boost-users-bounces_at_[hidden]] On Behalf Of Sabyasachi
Nath
Sent: Thursday, July 12, 2007 12:51 AM
To: boost-users_at_[hidden]
Subject: Re: [Boost-users] Building Boost on Solaris 10.

When using "--with-toolset=sun" it gives a message of unknown toolset.
Whereas by using "--with-toolset=sunpro" it runs but giving the same
problem.

Thanks & Regards,

Sabyasachi Nath
Product Development Unit
UshaComm India Pvt Ltd
Emp Id 1295
WS 441
Tel: [phone]/06
Mo: 919830622831
Extn 230

-----Original Message-----
From: boost-users-bounces_at_[hidden]
[mailto:boost-users-bounces_at_[hidden]]On Behalf Of Rene Rivera
Sent: Wednesday, July 11, 2007 9:50 PM
To: boost-users_at_[hidden]
Subject: Re: [Boost-users] Building Boost on Solaris 10.

Sabyasachi Nath wrote:
> I am new with Boost. I am facing the following problem while building 
> Boost 1.34.0.
...
> ============
> -bash-3.00$ ./configure --
> prefix=/disk2/sabyasachi/Boost_1.34.0/Build/boost_1_34_0 
> --with-libraries=all
...
> Can anybody please sort out what the problem is?

Add a "--with-toolset=sun" to the configure.

--
-- Grafik - Don't Assume Anything
-- Redshift Software, Inc. - http://redshift-software.com
-- rrivera/acm.org - grafik/redshift-software.com
-- 102708583/icq - grafikrobot/aim - grafikrobot/yahoo
_______________________________________________
Boost-users mailing list
Boost-users_at_[hidden]
http://lists.boost.org/mailman/listinfo.cgi/boost-users
_______________________________________________
Boost-users mailing list
Boost-users_at_[hidden]
http://lists.boost.org/mailman/listinfo.cgi/boost-users 
 
*******************************
This e-mail contains information for the intended recipient only.  It may contain proprietary material or confidential information.  If you are not the intended recipient you are not authorised to distribute, copy or use this e-mail or any attachment to it. Murex cannot guarantee that it is virus free and accepts no responsibility for any loss or damage arising from its use.  If you have received this e-mail in error please notify immediately the sender and delete the original email received, any attachments and all copies from your system.