Re: [Boost-users] 1.51 build issue, I think...

Subject: Re: [Boost-users] 1.51 build issue, I think...
From: Oliver Kowalke (oliver.kowalke_at_[hidden])
Date: 2012-08-22 13:51:28

Am 22.08.2012 19:43, schrieb Lemay.Steve:
>
> The qcc toolset basically "wraps" the gcc environment.  The current 
> supported compiler is gcc 4.4.2.  I believe QNX provides free 
> downloads of the development environment, as well as a pre-made QNX 
> hosted VM.   The 30 day trial license can be found here: 
> http://www.qnx.com/products/evaluation/ I get the same issue with qcc 
> 4.7.1 (which is currently considered prototype).
>
> I seemed to get the same result with this change.  (but, I don't 
> really know specifically what I'm doing in bjam files)
>
>     if ( ! ( <toolset>gcc in $(properties)
>
> || <toolset>qcc in $(properties)
>
> || <toolset>intel in $(properties)
>
> || <toolset>msvc in $(properties) ) )
>
> **
>
> *SGL*
>
> steven.lemay_at_[hidden] <mailto:steven.lemay_at_[hidden]>
>

you don't see stuff like

Performing configuration checks

     - 32-bit                   : no
     - 64-bit                   : yes
     - x86                      : yes
...patience...
...found 1002 targets...
...updating 20 targets...
gcc.compile.c++ 
../../../bin.v2/libs/test/build/gcc-4.6/debug/link-static/unit_test_main.o
...

?

Oliver

> *From:*boost-users-bounces_at_[hidden] 
> [mailto:boost-users-bounces_at_[hidden]] *On Behalf Of *Oliver Kowalke
> *Sent:* Wednesday, August 22, 2012 10:18 AM
> *To:* boost-users_at_[hidden]
> *Subject:* Re: [Boost-users] 1.51 build issue, I think...
>
> Am 22.08.2012 17:47, schrieb Lemay.Steve:
>
>     /do you use the bjam version provided by boost-1.51?/
>
>     Yes, bjam is created on the first build.  I'm using QNX SDK 6.5
>     SP1 on a Windows hosted development environment.  VS2012 also
>     installed.  Contents of batch file provide below. (gcc 4.4.2
>     support, and gcc 4.7.1 prototype)
>
>     /on which architecture you have QNX running (i386/x8664,arm, mips,
>     ...), which binary format and which ABI is used?/
>
>     Although the SDK support several target processors, this builds
>     target for x86 (AMD K8 architecture -- 32-bit addressing). I
>     believe ELF and SYSV (still need to verify) and the boost toolset
>     configuration is set to qcc (not gcc).  Is there a good/simple way
>     to verify the ABI?
>
>     As I am not very familiar with bjam syntax - could the
>     boost_1_51_0\libs\context\build\jamfile.v2 just be confused
>     because of the toolset definition?  Considering qcc wraps gcc...? 
>     I'm looking specifically at:
>
>     rule configure ( properties * )
>
>     {
>
>         local result  ;
>
>         if ( ! ( <toolset>gcc in $(properties)
>
>     || <toolset>intel in $(properties)
>
>     || <toolset>msvc in $(properties) ) )
>
>         {
>
>     result = <build>no ;
>
>     ECHO "toolset not supported" ;
>
>         }
>
>         return $(result) ;
>
>     }
>
>
> I don't know qcc, but if I look inside tools/build/v2/tools/qcc.jam it 
> is derived from gcc.
> The question is if you could use gcc as toolset value on QNX too (bjam 
> toolset=gcc)?
> Is GNU as available and installed on QNX (required to compile the 
> assembler)?
>
> Maybe you could try to add <toolset>qcc in $(properties) in rule 
> configure.
>
> Is a free version of QNX available? AFAIK some years ago it was but 
> the new owner of QNX has revoked the free license.
>
> Oliver
>
>
>
> _______________________________________________
> Boost-users mailing list
> Boost-users_at_[hidden]
> http://lists.boost.org/mailman/listinfo.cgi/boost-users