2014-11-12 22:21 GMT+01:00 Grzegorz Chlebus <[hidden email]>:
2014-11-12 22:07 GMT+01:00 Barend Gehrels [via Boost] <[hidden email]>:
gchlebus wrote On 12-11-2014 21:52:
2014-11-08 11:53 GMT+01:00 Barend Gehrels [via Boost] <[hidden email]>:
gchlebus wrote On 8-11-2014 2:33:
2014-11-07 19:30 GMT+01:00 Barend Gehrels [via Boost] <[hidden email]>:
gchlebus wrote On 6-11-2014 19:08:
2014-11-04 17:23 GMT+01:00 Barend Gehrels [via Boost] <[hidden email]>:
2014-10-29 23:18 GMT+01:00 Barend Gehrels [via Boost] <[hidden email]>:
gchlebus wrote On 24-10-2014 16:44:The current distance strategy has (currently) no means to get the angle,
> I am wondering whether it would be possible to achieve anisotropic buffering
> (distances in neg x, pos x, neg y, pos y can have different values) of a
> polygon using the buffer function with custom-implemented distance strategy.
> What I want to achieve is presented on the figure 2-b in the following
> I would be grateful to hear from you whether it is doable, and if positive,
> how one could implement such a custom distance strategy.
or a vector of the new point to be buffered. We can consider adding that.
However, by writing custom strategies for join, side, point (for
point-buffers) and possibly end (for line-buffers) you should be able to
create this, because these have this information.
Attached a program doing similar things with polygons and points (I vary
the distance based on angle - you will have to do something with your
The output is also attached.
The program defines three custom strategies, all based on the same
mechanism, to create interesting output.
I did not do the end-strategy but that would look similar, you can look
at the provided end-strategy (round) and apply the same function.
gchlebus wrote On 31-10-2014 18:13:
I really appreciate your example code, it helped me a lot. Attached you can find my source code.In my implementation of the anisotropic buffering I didn't know how to make use of the distance strategy, as it was possible to make it work using only side and join strategies.I encountered strange behavior when changing number of points describing a full circle. Using 360 points produced a good output, whereas 90 points caused only the second polygon to be buffered (see attached figures). I would be thankful if you could help me to resolve this issue as well as for any remarks to my code.
I could reproduce this. Basically the join-strategy should always include points perp1 and perp2 (these are the two points perpendicular to the two sides which the join-strategy joints). Either they are re-calculated, or they can be just added to begin and end. So I did the last option, and that piece of code now looks like:
double const angle_increment = 2.0 * M_PI / double(point_count);
double alpha = angle1 - angle_increment;
range_out.push_back(perp1); // added
for (int i = 0; alpha >= angle2 && i < point_count; i++, alpha -= angle_increment)
pdd v = getPointOnEllipse(alpha);
bg::set<0>(p, bg::get<0>(vertex) + v.first);
bg::set<1>(p, bg::get<1>(vertex) + v.second);
range_out.push_back(perp2); // added
My sample code of course also suffered from that, so I added it there too if I use it in the future.
I tested your algorithm with various points and distances and it now seems always OK.
You ask for remarks on your code: it looks good ;-) one thing, many terms are recalculated such as pow(xPos*tan(alpha), 2)); or just tan(alpha), I usually store these into variables, to avoid expensive recalculations of the same terms, though maybe they are optimized by the compiler.
P.S. this list discourages top-postings
I corrected the join strategy, but still the buffering doesn't work in all cases as expected. When using xPos = 1, and other values equal 0, the buffered polygon contains a hole (see xPos1.svg), whereas setting xPos to 2 produces a correct result (xPos2.svg). Do you know how to fix it? I attached also main.cpp, as I changed the code a bit and it contains the polygon for which causes the strange behavior.
That is most probably caused by an error in some of your calculations:
The line y = sqrt(yPos2 * (1 - pow(x, 2) / xNeg2));
causes a NAN for this input:
alpha about PI
then xNeg2 = 0.010000000000000002
and x = -0.10000000000000002
and yPos2 = 0.010000000000000002
This adds a weird line containing NAN to the join, causing the buffer process fail.
I got this using these parameters:
double xPos = 1.0, xNeg = 0.1, yPos = 0.1, yNeg = 0.1;
and not the parameters you have (that was fine for me).
I think you should make the calculations full-proof first...
For example add a line in the join-strategy:
std::cout << i << " "<< angle1 << " " << angle2 << " " << v.first << " " << v.second << std::endl;
Thanks, I'll try to improve my calculations.By the way, I was playing with different strategies combinations and I found out that when using only boost buffer strategies:double points_per_circle = 36;double distance = 130;bg::strategy::buffer::distance_symmetric<double> distance_strategy(distance);bg::strategy::buffer::end_flat end_strategy;bg::strategy::buffer::point_circle point_strat(points_per_circle);bg::strategy::buffer::side_straight sideStrat;bg::strategy::buffer::join_round joinStrat(points_per_circle);
the buffer function can still fail (produce no output) when the distance is higher than 128 (e.g, 128, 130, 150, 300, 400). But this happens up to a certain value, where the buffer function starts producing a correct output (e.g., distances 900, 1000).
Hmm, I see (starting at different values, but I can reproduce).
I created a ticket, will be looked at. Thanks for reporting.
I'm glad that I could help.Anyway, I fixed the bug with NAN, but still when using (e.g. xNeg = 1, other 0) the buffer produces no output. I am really wondering, how it could work on your machine.I printed the values used by join and side strategies and they seem to be fine (no NANs or other strange values) - see attached log.txt and updated main.cpp used to produce the log file.
I've compiled my code using msvc 12.0 and gcc 4.8.
Which branch or version of Boost do you use?
In the meantime, I managed to fix the bug you reported, and it is committed today.
Sorry for my question, but could you try it again with the latest branch "develop" from github ?
sure, I downloaded the geometry lib from the develop branch, but still buffer returns an empty geometry (using xNeg = 1, others 0).I've ran my code also for big distances, and it works perfectly. Good job!
I made today an interesting observation. It seems that the buffer function has a problem when the extents (xNeg, xPos, yNeg, yPos) are zero. Taking my last example, setting xNeg to 1 and others to 1e-3 makes the buffer work.