Boost logo

Boost Users :

Subject: Re: [Boost-users] [units] "Simple" conversion from Kelvin to Celsius
From: Michael Powell (mwpowellhtx_at_[hidden])
Date: 2013-08-22 15:22:30


Well...

As it turns out, our little fuel gauge, while it can report
temperatures, OT, UT (over/under), and so on, the temperature parts
are not hooked up. I haven't read the data sheet that closely, but my
guess is that's temperature from a known reference voltage, usually
converted to/from a DAC somewhere.

Anyhow, thank you those who responded or are following this for the
clarification.

Regards,

Michael Powell

On Thu, Aug 22, 2013 at 12:25 PM, Matthias Schabel
<boost_at_[hidden]> wrote:
> There are some subtleties for temperature conversions, depending on whether you want to convert relative temperatures (differences) or absolute temperatures. See here for example :
>
> http://www.boost.org/doc/libs/1_54_0/doc/html/boost_units/Examples.html#boost_units.Examples.AbsoluteRelativeTemperatureExample
>
> Matthias
>
>> Hello,
>>
>> It's been a couple of years since I've done any work with Boost.Units,
>> and I am finding that I want to make a dimensionally-safe conversion
>> from Kelvin to Celsius.
>>
>> I've got an I2C controller that reports in Kelvin, but I want to
>> report it to the end-user in Celsius.
>>
>> The examples I am finding seem to "almost" fit the bill, but I am
>> having a difficult time extrapolating a sane conversion.
>>
>> First, would help if I understood what the Boost.Units SI (my assumed
>> base-system) base-temperature units were. I gather Fahrenheit? Or is
>> it indeed Kelvin? I could be mistaken.
>>
>> Thank you...
>>
>> Regards,
>>
>> Michael Powell
>> _______________________________________________
>> Boost-users mailing list
>> Boost-users_at_[hidden]
>> http://lists.boost.org/mailman/listinfo.cgi/boost-users
>
> _______________________________________________
> Boost-users mailing list
> Boost-users_at_[hidden]
> http://lists.boost.org/mailman/listinfo.cgi/boost-users


Boost-users list run by williamkempf at hotmail.com, kalb at libertysoft.com, bjorn.karlsson at readsoft.com, gregod at cs.rpi.edu, wekempf at cox.net